Physicochemical properties of chars at different treatment temperatures

In this study, the physicochemical properties of the char of Indonesian SM coal following heat treatment at various temperatures were evaluated using X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and morphological and specific surface area analysis. Based on these analyses, heat treatment of coal was determined to be the most effective in increasing the coal rank. In the XPS analysis, the C–O and C–O–C groups and quaternary-N species were found to be of a lower grade coal when the pretreatment temperature decreased, meanwhile the C–C group and pyridinic species increased. In the FT-IR analysis, the collapse of the C–O and C–O–C group was observed due to the collapse of the ether group. In SEM and Brunauer–Emmett–Teller (BET) analysis, a decrease in the ether group was shown to be accompanied with the formation of micropores.

Implications Recently, XPS analyses have been reported as coal surface analysis. Usually, they have reported the analysis of the coals with different rank. This study investigated the coal surface characteristics of the coals pretreated at different temperature using various analyses (BET, SEM, XPS, FT-IR), and this study can be the basis for other research and applications.     

Observed chemical characteristics of long-range transported particles at a marine background site in Korea

Deokjeok Island is located off the west coast of the Korean Peninsula and is a suitable place to monitor the long-range transport of air pollutants from the Asian continent. In addition to pollutants, Asian dust particles are also transported to the island during long-range transport events. Episodic transport of dust and secondary particles was observed during intensive measurements in the spring (March 31-April 11) and fall (October 13-26) of 2009. In this study, the chemical characteristics of long-range-transported particles were investigated based on highly time-resolved ionic measurements with a particle-into-liquid system coupled with an online ion chromatograph (PILS-IC) that simultaneously measures concentrations of cations (Li+, Na , NH4+, K+, Ca2+, Mg2+) and anions (F-, C1-, NO3-, SO42-). The aerosol optical thickness (AOT) distribution retrieved by the modified Bremen Aerosol Retrieval (M-BAER) algorithm from moderate resolution imaging spectroradiometer (MODIS) satellite data confirmed the presence of a thick aerosol plume coming from the Asian continent towards the Korean peninsula. Seven distinctive events involving the long-range transport (LRT) of aerosols were identified and studied, the chemical components of which were strongly related to sector sources. Enrichment of acidic secondary aerosols on mineral dust particles, and even of sea-salt components, during transport was observed in this study. Backward trajectory, chemical analyses, and satellite aerosol retrievals identified two distinct events: a distinctively high [Ca2++Mg2]/[Na+] ratio (>2.0), which was indicative of a preprocessed mineral dust transport event, and a low [Ca2++Mg2+]/[Na+] ratio (<2.0), which was indicative of severe aging of sea-salt components on the processed dust particles. Particulate C1- was depleted by up to 85% in spring and 50% in the fall. A consistent fraction of carbonate replacement (FCR) averaged 0.53 in spring and 0.55 in the fall. Supporting evidences of C1- enrichment on the marine boundary layer prior to a dust front were also found. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for sector and air mass classifications of clean and LRT cases.     

A study on engineering characteristics of asphalt concrete using filler with recycled waste lime

This study focuses on determining the engineering characteristics of asphalt concrete using mineral fillers with recycled waste lime, which is a by-product of the production of soda ash (Na(2)CO(3)). The materials tested in this study were made using a 25%, 50%, 75%, and 100% mixing ratio based on the conventional mineral filler ratio to analyze the possibility of using recycled waste lime. The asphalt concretes, made of recycled waste lime, hydrated lime, and conventional asphalt concrete, were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility, and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete at the wide range of temperatures. It was also determined that the mixtures with recycled waste lime showed higher resistance against stripping than conventional asphalt concrete. It was concluded from various test results that a waste lime can be used as mineral filler and, especially, can greatly improve the resistance of asphalt concrete to permanent deformation at high temperatures.     

Phase change materials for advanced cooling packaging

Controlling the temperature of food packages during transport is needed with the rise of online shopping. During transport, food requires cold temperatures to maintain freshness. A major issue is the undesired warming of food when packages are exposed to warm temperatures on airport tarmacs and temporary unrefrigerated storage during air transportation. To solve this problem, phase change materials (PCMs) can maintain package temperature by changing their phase from liquid to solid or vice versa, to absorb or release latent heat. Although this technology is still not fully commercially viable yet, it has good potential. This article reviews all aspects of PCM packaging, including their classification, technical approaches, and commercial applications, with focus on the direct integration of PCM into food package systems. The article also provides guidelines for future research and reveals aspects that still hinder the full exploitation of PCM in the food packaging industry. To make PCM packaging commercially viable, research needs to consider aspects such as cost, consumer acceptance and confidence, regulatory aspects, e.g., labeling, and multifunctionality.     

Religious harassment in the workplace: An examination of observer intervention

Religious harassment claims in the United States have risen sharply over the past decade. However, victims of religious harassment may not always report harassment, and true rates may be higher. Hence, actions taken by third parties present (observers) are important in combating harassment in the workplace. The purpose of this paper is to extend a previous model of observer intervention and related research by testing it empirically in the context of religious harassment and identify factors that influence observers' decision to intervene (intervention), when they intervene (level of immediacy), and how much they intervene (level of involvement). Across two studies, we find evidence that verbal harassment, ambiguity of intent, relationship to target/harasser, recurrence belief, religious commitment, pro‐social orientation, and the interactive effect of shared religion and religious commitment predict intervention. Furthermore, individuals show higher levels of involvement and immediacy in intervention when costs are low and emotional reactions are high. Implications of these findings for engaging observers in combatting harassment are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Distributions of heavy metals in the sediments of South Korean harbors

Bottom sediments of harbors in the South Korea have been long suspected for metal contamination due to ship-based and urban-based activities for the past several decades. A number of areas have been suspected to impair ecosystem services to the local residents and drawn complaints from main stakeholders. Twelve contamination suspected harbors were subject to evaluate the level of contamination of Cr, Ni, Cu, Zn, As, Cd, Pb and Hg. The level of sediment contamination for each metal was evaluated comparing the relative enrichment of a given metal to pollution-insensitive aluminum. Regional background concentration of a given metal was also determined based on its down core measurement and sediment texture. Ecological risk posed by the presence of heavy metals was evaluated using the sediment quality guidelines (SQGs) developed by United States National Ocean and Atmosphere Administration (US NOAA) as benchmarks for evaluating sediment chemistry to aquatic organisms. Cu, Zn, Cd, Pb and Hg in the surface sediment were found to be higher than a factor of 1.5 than background sediments, and the overall metal contaminations of surface sediment can be regarded as medium-high- to high-priority sites in the sense of SQGs.