我市污水处理自动化控制系统展望——基于PLC控制与触摸屏的应用

介绍了由PLC和触摸屏组成的控制系统的特点和功能,以及PLC和上位机构成的控制系统可实现污水处理整个过程的实时监测和控制。     

钢铁企业固体废弃物资源化利用浅析

固体废物做到资源化即通过综合利用,使有利用价值的固体废物变废为宝,实现资源的再循环利用,是固体废物污染控制一直努力方向。钢铁联合企业生产过程中产生的固体废弃物量大、面广,如对其进行资源化利用不仅可获得好的效益,同时也解决了环保难题。通过借鉴国内外钢铁企业固体废弃物资源化利用成功技术,使我们在开展环境影响评价工作中对钢铁企业固废的资源化利用提出一些切实可行的控制措施。     

实施污染物总量控制中的环境监测

随着经济的发展,由发展带来的污染问题也愈发的严重,如何治理和监测环境问题显得十分重要。文章旨在研究环境监测在对污染物总量控制上的作用做出分析,指出目前环境监测上存在的不足,提出建议和解决方案,更好的发挥环境监测的作用。     

沙湖湿地的生态环境健康评价的研究

通过对生态系统健康评价体系的研究,以沙湖为例进行论证,最终得出沙湖生态系统健康度为0.32,属于不健康,制约沙湖不健康的疾病因子在于：湿地的补水水质差,导致湿地水质污染加重,富营养化现象严重,并且由于人为因素,导致物种多样性逐年下降,以上因素最终导致了沙湖湿地生态系统抗干扰能力下降,湖区湿地健康水平较低,根据对沙湖湿地功能的分析,最终设计出了沙湖湿地生态系统健康恢复技术方案。     

SCADA系统在污染物治污工况在线监控系统中的应用

本文介绍了SCADA系统在内蒙古自治区重点污染源治污工况在线监控系统中的应用,系统以西门子成熟S7—200系列可编程序控制器为在线监测设备,基于OPC（OLE for Process Control）技术,以WINCC为监控平台,实现了自治区内重点污染源企业治污工况的远程监测、污染物排放的有效管理。     

我国农村经济发展现状与环境治理的相关问题探讨

目前,随着我国农村经济的高速发展,环境问题也日益突出.如仅重视经济的发展而忽略环境污染问题,必将严重导致一个恶性循环发展链,使经济发展的速度受到不良因素的制约.改革开放以来,中国农村经济得到了较快的发展,农村面貌发生了翻天覆地的变化.但在经济迅速发展的同时,农村的生态环境却在迅速的恶化.如何改变农村现有的经济发展模式,寻求高效、稳定、持续的农村发展模式成为当前重要而紧迫的课题.文章就当前农村经济的发展现状与农村环境污染的防治做相关的探讨.     

含油废水处理技术

概述了含油废水的来源、特点、分类及危害,介绍了含油废水的处理方法的原理、优势及存在的问题,同时简述了各种处理方法的最新研究成果,最后提出了含油废水发展趋势。     

PAS-PDMDAAC复合混凝剂研究

以Al2（SO）4和PDMDAAC为原料进行了无机-有机复合絮凝剂的复合实验研制,确定其制备工艺条件,并对油田现场采集的钻井废水作絮凝沉降实验,所研制的PAS-PDMDAAC复合絮凝剂对COD的去除效率可大大提高.     

Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.