西部生态脆弱区矿山不同开采强度下生态系统服务时空变化——以神府矿区为例

以神府矿区为例,选取土地利用、植被覆盖、土壤、气象等生态环境与统计数据指标,利用RS和GIS技术构建生态系统服务遥感测量评估指标体系,评估研究区2005-2015年生态系统服务变化及时空分布特征,进一步探究神府矿区不同开采强度对生态系统服务的影响并进行驱动力分析。研究结果表明:(1)2005年、2010年、2015年研究区的总生态系统服务分别为1.598×1010元、1.905×1010元、2.134×1010元,呈现逐年递增的趋势;(2)生态系统服务功能中水土保持价值比例最大,草地的单位面积生态系统服务价值最高,耕地、草地生态系统为该地区贡献了最多的生态系统服务价值;(3)研究区生态系统服务分布表现为由东北向西南逐渐降低的趋势,不同开采强度下的生态系统服务增长变化较为相似,煤炭开采区域生态系统服务未显著下降,整体较为平稳。对生态系统服务变化的驱动分析表明在近年来相对改善的气候环境与人工修复共同作用下,神府矿区生态系统服务未发生明显的缩减。此类半干旱生态脆弱矿区国土空间生态修复适宜通过主动的"保护性开发"以及"人工诱导+自然修复"为主的方式,避免大范围与高强度的水土扰动型治理,通过适度...     

对低影响开发与海绵城市的再认识

海绵城市建设是在继承我国古代先贤智慧和参考国外经验,系统总结我国雨洪管理领域长期研究和实践经验的基础上,结合我国城市水系统实际问题提出的城市发展方式,其核心是构建基于绿灰结合的现代城市雨洪控制系统,通过"渗、滞、蓄、净、用、排"综合措施,实现"治涝"与"治黑"等多重目标。低影响开发是海绵城市建设的重要指导思想,也是海绵城市核心技术体系的重要组成部分。正确认识低影响开发与海绵城市的内涵与联系,对于进一步在全国范围内落实低影响开发建设模式,科学推进海绵城市建设具有重要意义。     

基于洪涝风险分析的纽约市城市绿地规划设计及其对中国的启示

1968年美国开始推行洪涝保险计划,不断完善对洪涝风险的研究,并逐步形成了一套相对完善的洪泛区管理体系,而洪涝风险分析在洪涝保险、城市规划、土地开发、应急管理等领域广泛应用。纽约市在经历了多次飓风侵害,尤其是2012年飓风桑迪(Sandy)之后,意识到城市绿地在极端暴雨事件时对雨洪调蓄的重要作用,经过持续的研究实践,提出了基于洪涝风险分析的城市绿地规划设计要求。基于总结美国纽约市在飓风桑迪影响下对洪涝风险图的调整,及其对城市绿地规划设计相关要求,提出其对我国洪涝风险管控及城市绿地规划设计的启示。     

层控矿床的成岩成矿

本文从成岩分异,成岩交代,自生、脱水、泄水、压实、挤压、扩散和胶结作用等方面,论述层控矿床的成岩成矿作用。     

镉铅在粘土上的吸附及受腐殖酸的影响

试验研究了镉和铅2种重金属在蒙脱土和高岭土上的吸附,以及外加腐殖酸的3种组分（富里酸、棕色胡敏酸和灰色胡敏酸）的影响。镉铅在粘土上的吸附随着介质pH的升高而增加。在pH4-8范围内的任意pH点,镉在高岭土上的吸附量因富里酸而降低,因2种胡敏酸而升高;当pH值高于6时,吸附量急剧增加。外加富里酸使得铅在粘土上的吸附在pH＞6时意外出现随着介质pH而降低的趋势。     

基于RIAM模型的生态旅游开发环境影响评价研究

RIAM (Rapid Impact Assessment Matrix)是进行环境影响快速识别的半定量评价方法,能综合考虑项目对自然环境-生物生态-社会文化-经济发展的影响,评价过程较传统评价方法更为透明公开.以武夷山生态旅游开发项目为例,应用RIAM模型进行生态环评,可以明确地表达项目的综合环境影响,使各种替代方案环境影响对比清晰明了,且还能快速判断出生态旅游开发的主要负环境影响排序.RIAM环评方法使环评过程透明,环评结果表达直观,能更好服务于环境决策和管理.     

基于TM影像的乌梁素海叶绿素a浓度反演

首先选取预处理后乌梁素海TM影像的单波段及波段组合与实测叶绿素a浓度进行分析,发现相关性很低。然后,结合乌梁素海的水利条件和自身特点,把湖区分为两个区,发现波段组合(TM1+TM2+TM4)/TM3和TM4/TM3与叶绿素a浓度有较高的相关性。最后,选取误差较低的波段组合(TM1+TM2+TM4)/TM3建立线性模型,实时、快速地反演乌梁素海湖区叶绿素a浓度,与实地情况吻合,为乌梁素海"黄苔"预警提供理论依据。     

Changes in nitrogen budget and potential risk to the environment over 20 years (1990–2010) in the agroecosystems of the Haihe Basin,China

The nitrogen balance can serve as an indicator of the risk to the environment of nitrogen loss from agricultural land. To investigate the temporal and spatial changes in agricultural nitrogen application and its potential threat to the environment of the Haihe Basin in China, we used a database of county-level agricultural statistics to calculate agricultural nitrogen input, output, surplus intensity, and use efficiency. Chemical fertilizer nitrogen input increased by 51.7% from 1990 to 2000 and by 37.2% from 2000 to 2010, concomitant with increasing crop yields. Simultaneously, the nitrogen surplus intensity increased by 53.5% from 1990 to 2000 and by 16.5% from 2000 to 2010, presenting a continuously increased environmental risk. Nitrogen use efficiency decreased from 0.46 in 1990 to 0.42 in 2000 and remained constant at 0.42 in 2010, partly due to fertilizer composition and type improvement. This level indicates that more than half of nitrogen inputs are lost in agroecosystems. Our results suggest that although the improvement in fertilizer composition and types has partially offset the decrease in nitrogen use efficiency, the environmental risk has still increased gradually over the past 20 years, along with the increase in crop yields and nitrogen application. It is important to achieve a better nitrogen balance through more effective management to significantly reduce the environmental risk, decrease nitrogen surplus intensity, and increase nitrogen use efficiency without sacrificing crop yields.     

Phosphorus recovery from biogas fermentation liquid by Ca–Mg loaded biochar

Shortage in phosphorus (P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar (Ca–Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca–Mg/biochar was rich in organic functional groups and in CaO and MgO nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca–Mg/biochar could be accelerated by nano-CaO and nano-MgO particles and reached equilibrium after 360 min. The process was endothermic, spontaneous, and showed an increase in the disorder of the solid–liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca–Mg/biochar could not be significantly influenced by the typical pH level of biogas fermentation liquid. The nano-CaO and nano-MgO particles of Ca–Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca–Mg/biochar were in the order of Ca–Mg/B600 > Ca–Mg/B450 > Ca–Mg/B300. Results revealed that postsorption Ca–Mg/biochar can continually release P and is more suitable for an acid environment.     

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake,Lake Taihu,China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 > DGT_0.78 > DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.