基于资源最优化回收的再制造工程

从对寿命末端产品的处理选择分析出发，建立了末端产品回收梯级模型，提出基于最优化产品末端回收选择的再制造工程回收的附加值最大，环境污染最小，综合效益最高，并分析了再制造在产品全寿命周期各阶段所发挥的重要作用。     

新疆开都—孔雀河流域天然植被生态需水量研究

本研究以新疆开都—孔雀河流域为研究区,针对流域不同保护目标,采用定额法、阿克苏水平衡站公式和阿维里扬诺夫公式三种方法,分别估算了生态红线区和生态敏感区的生态需水量。研究结果表明开都—孔雀河流域生态红线区平均需水量为13.82×10~8m~3,生态敏感区平均生态需水量为2.06×10~8m~3,且潜水蒸发法中的阿克苏水平衡站公式的计算值与平均值最为接近。由于干旱区降水量稀少,天然植被生长完全依赖地下水,一般采用潜水蒸发法间接计算植被的生态需水量,在植被需水定额不好确定的情况下,更是首选潜水蒸发法进行生态需水量的估算。研究成果可以为孔雀河生态输水工程和塔里木河下游生态输水工程的实施提供科学依据。     

城市固体废物生物处理方法及其可行性

生物反应堆是通过强化微生物转化和降解有机废物的能力进行处理固体废物的一种方法。本文分别对好氧生物处理、厌氧生物处理和兼性生物处理的机理、影响因素以及各污染物质的迁移转化规律进行综合分析。研究表明生物反应堆具有明显的社会、环境、经济效益，是实现可持续发展的一条重要途径，为以后的研究和应用提供可靠的理论依据。     

化学混凝-SBR法处理肉禽屠宰废水的研究

针对肉禽屠宰废水的特点，采取了先混凝后生化的处理方法。在实验中确定了最佳混凝剂和最佳工艺条件。实验结果表明，采取此方法处理肉禽屠宰废水，其各项指标可达国家规定的排放标准。     

Factor structure of the transformational leadership model in human service teams

The purpose of this study was to examine the factor structure of the transformational leadership model in human service teams. As the nature of this work environment mandates certain management‐by‐exception practices, patterns of correlations between perceptions of active and passive management‐by‐exception behaviors and transformational, transactional, and laissez‐faire leadership were of interest. 236 leaders and 620 subordinates from 54 mental health teams completed the Multifactor Leadership Questionnaire, form 8Y. Results suggest that active and passive management‐by‐exception factors are independent constructs. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002     

COMPARATIVE STUDY OF OPTIMIZATION TECHNIQUES FOR IRRIGATION PROJECT PLANNING1

ABSTRACT: This study presents three optimization techniques for on‐farm irrigation scheduling in irrigation project planning: namely the genetic algorithm, simulated annealing and iterative improvement methods. The three techniques are applied to planning a 394.6 ha irrigation project in the town of Delta, Utah, for optimizing economic profits, simulating water demand, and estimating the crop area percentages with specific water supply and planted area constraints. The comparative optimization results for the 394.6 ha irrigated project from the genetic algorithm, simulated annealing, and iterative improvement methods are as follows: (1) the seasonal maximum net benefits are $113,826, $111,494, and $105,444 per season, respectively; and (2) the seasonal water demands are 3.03*10³ m³, 3.0*10³ m³, and 2.92*10³ m³ per season, respectively. This study also determined the most suitable four parameters of the genetic algorithm method for the Delta irrigated project to be: (1) the number of generations equals 800, (2) population size equals 50, (3) probability of crossover equals 0.6, and (4) probability of mutation equals 0.02. Meanwhile, the most suitable three parameters of simulated annealing method for the Delta irrigated project are: (1) initial temperature equals 1,000, (2) number of moves equal 90, and (3) cooling rate equals 0.95.