嗜热菌株AT07-1的分离鉴定及其在污泥溶解预处理厌氧发酵产氢中的应用

从湖南大学花园土壤中采集样品,用稀释涂布法分离和纯化适于污泥溶解的典型嗜热菌菌株,从中选出一株高效菌进行形态观察,并对其进行生理生化鉴定.结果表明,该菌株的革兰氏染色为阳性,呈细杆状,产芽孢,为好氧或兼性需氧细菌,最适生长温度为65℃,最适生长pH值为6.8~7.5.通过16SrDNA碱基测序和对比证实,该菌株是目前尚未报道过的一株嗜热菌,GenBank中注册命名为Bacillus thermophilic bacteria AT071(注册号:FJ231108).同时,将其纯种菌用于嗜热酶溶解（solubilization by thermophilic enzyme,S-TE）污泥稳定化处理,接种该嗜热菌可促进污泥中悬浮固体的溶解,2.5d时接种试验挥发性悬浮固体 (volatile suspended solid,VSS)溶解率达到59.41%,比不接种试验同期提高了25.58%,达到了EPA规定的污泥稳定化要求.进一步对经AT071预处理的污泥厌氧产氢效果进行研究,试验结果显示,接种处理后污泥发酵产氢效果良好,高出未接种处理（65℃热处理）污泥26.4%,发酵气体中只含有H2和CO2.     

基于GIS与群落调查的北京市野生北柴胡资源量测算

以2007年北京市地全区236个群落调查样方数据和典型区域300株野生北柴胡采样数据为基础,采用模型模拟、样方调查、GIS与数理统计等方法,对野生北柴胡分布与资源产量进行研究。结果表明：①北京市野生北柴胡在植物群落中的种群密度介于0～6000株/hm²之间,产量密度范围介于0～683kg/km²之间,密度最大的生境为海拔1 800m左右的山顶杂草草甸;②不同生境下根生物量（Y）与植株地上形态特征株高（x₁）,叶片数（x₂）和分枝数（x₃）显著相关;③北京地区北柴胡资源分布面积为752 937hm²,资源总量约为410t;④北京市野生北柴胡资源的水平分布特征表现为,东部怀柔、密云和平谷等地产量密度低,西部和中部地区密度较高,从垂直变化规律看,北柴胡分布的主要区域集中在海拔100～2 000m的范围内,随着海拔高度的增加,产量密度表现出先增加后减少的总体趋势。     

GIS技术在化学事故应急指挥系统中的应用研究

以地理信息系统（简称GIS）的技术特点为基础,结合应急指挥系统中的功能需求,探讨化学事故应急指挥系统GIS平台能够实现的功能,以及为实现这些功能而构建的数据库的建设。将GIS技术应用在化学事故应急指挥系统中,能够迅速、直观地了解事故装置和设备情况,获得有关信息,进行事故模拟。对提高事故处理速度,缩短反应时间,减少事故损失具有重要意义。     

油库中油品的蒸发危害及措施

分析了造成油库油品蒸发损耗的原因及危害,并针对油罐的自然通风、“小呼吸”、“大呼吸”所造成的油品损耗,提出了降低油品蒸发损耗的措施。     

Evaluation of SWAT Impoundment Modeling Methods in Water and Sediment Simulations

Worldwide studies show 80%–90% of all sediments eroded from watersheds is trapped within river networks such as reservoirs, ponds, and wetlands. To represent the impact of impoundments on sediment routing in watershed modeling, Soil and Water Assessment Tool (SWAT) developers recommend to model reservoirs, ponds, and wetlands using impoundment tools (ITs). This study evaluates performance of SWAT ITs in the modeling of a small, agricultural watershed dominated by lakes and wetlands. The study demonstrates how to incorporate impoundments into the SWAT model, and discusses and evaluates involved parameters. The study then recommends an appropriate calibration sequence, i.e., landscape parameters calibration, followed by pond/wetlands calibration, then channel parameter calibrations, and lastly, reservoir parameter calibration. Results of this study demonstrate not following SWAT recommendation regarding modeling water land use as an impoundment depreciates SWAT performance, and may lead to misplaced calibration efforts and model over‐calibration. Further, the chosen method to model impoundments’ outflow significantly impacts sediment loads in the watershed, while streamflow simulation is not very sensitive. This study also allowed calculation of mass accumulation rates in modeled impoundments where the annual mass accumulation rate in wetlands (2.3 T/ha/yr) was 39% higher than mass accumulation rate in reservoirs (1.4 T/ha/yr).     

Study of nitrogen oxide absorption in the calcium sulfite slurry

Experiments were conducted using a bubbling reactor to investigate nitrogen oxide absorption in the calcium sulfite slurry. The effects of CaSO₃ concentration, NO₂/NO mole ratio and O₂ concentrations on NO₂ and SO₂ absorption efficiencies were investigated. Five types of additives, including MgSO₄, Na₂SO₄, FeSO₄, MgSO₄/Na₂SO₄ and FeSO₄/Na₂SO₄, had been evaluated for enhancing NO₂ absorption in CaSO₃ slurry. Results showed that CaSO₃ concentration had significant impact on NO₂ and SO₂ absorption efficiencies, and the highest absorption efficiencies of SO₂ and NO₂ could reach about 99.5 and 75.0 %, respectively. Furthermore, the NO₂ absorption was closely related to the NO₂/NO mole ratio, and the existence of NO₂ in flue gas may promote NO absorption. The presence of O₂ in simulated flue gas was disadvantage for NO _x removal because it can oxidize sulfite to sulfate. It was worth pointing out that FeSO₄/Na₂SO₄ was the best additive among those investigated additives, as the NO₂ removal efficiency was significantly increased from 74.8 to 95.0 %. IC and in situ FTIR results suggest that the main products were NO₃ ^? and NO₂ ^? in liquid phase and N₂O, N₂O₅ and HNO₃ in gas phase during the CaSO₃ absorption process.     

An empirical examination of personal learning within the context of teams

Using a sample of 588 employees in 59 work teams, we tested a model that situates personal learning within the context of teams, viewing it as a joint function of teams' leadership climate (i.e., transformational leadership) and task characteristics (i.e., task routineness and task interdependence). Consistent with our hypotheses, we found that the positive relationships between transformational leadership climate and the two dimensions of personal learning (relational job learning and personal skill development) were moderated by the nature of the teams' tasks. Specifically, transformational leadership climate was more strongly associated with personal learning for members of teams working on tasks that were less routine, rather than more routine. However, no significant moderation was found for leadership climate and task interdependence. Our findings underscore the importance of taking into account the contextual conditions within which leadership influence occurs while also demonstrating the potential role that leaders can play in promoting employees' personal learning. Overall, our study bolsters theories that conceptualize adult learning as a transaction between people and their social environments and points to a practical need to match leadership styles with team task characteristics to unleash transformational leadership effects. Copyright © 2015 John Wiley & Sons, Ltd.     

太子河流域硅藻群落与驱动因子的定量关系

定量研究水生生物对水环境参数的适宜值是评估栖息地质量和维持生物完整性的主要途径. 以辽宁省太子河流域为研究范例,选择Y(优势度指数)大于0.000 1的硅藻为研究对象,结合水环境参数,采用CCA(典范对应分析)、CART(分类回归树)和WA(加权平均回归分析)等方法,分析硅藻与水环境因子的关系,并计算硅藻对驱动因子的最适值. CCA结果表明,IOS(底质指数)、ρ(TDS)(TDS为总溶解固体)和ρ(COD_Mn)是硅藻群落的驱动因子;CART预测结果表明,IOS高的水环境硅藻密度高于IOS低的水环境,ρ(TDS)和ρ(COD_Mn)低的水环境硅藻密度高于ρ(TDS)和ρ(COD_Mn)高的水环境;WA结果显示,96种硅藻对IOS、ρ(TDS)和ρ(COD_Mn)的最适值范围分别为1.00~6.44、60.29~820.30 mg/L和0.46~2.89 mg/L. 钝端菱形藻解剖刀变种和尖端菱形藻适宜栖息于IOS较低而ρ(COD_Mn)较高的水环境, Gomphonema trancatum和肿大桥弯藻则适宜栖息于IOS较高的水环境;缠结异极藻二叉变种和尖细异极藻适宜栖息于ρ(TDS)较高的水环境,弧形峨眉藻和克洛钝脆杆藻则适宜栖息于ρ(TDS)较低的水环境;弧形峨眉藻和隐头舟形藻威蓝变种适宜栖息于ρ(COD_Mn)较低的水环境. 针杆藻和桥弯藻对IOS的最适值高于舟形藻和菱形藻以及其他藻种,96种硅藻对ρ(TDS)和ρ(COD_Mn)的最适值均表现为菱形藻和异极藻较高、针杆藻和桥弯藻较低.      

流域水生态安全评估方法

为建立合理的流域水生态安全评估指标体系,以流域为对象,对水生态安全内涵进行了阐释,并对流域水生态安全评估指标进行了系统分析.基于“压力、状态、功能、风险”四要素,构建了“目标层-方案层-要素层-指标层”的评估体系,其中方案层包括水生态压力、水生态状况、水生态功能和水生态风险4个方面,涵盖土地利用、水资源利用、污染物排放、栖息地状态、水生态质量、水产品供给、休闲娱乐、水环境净化、重金属风险等9个评估要素18个评估指标,并详尽表述了各评估指标的内涵及其计算方法.采用综合指数法计算ESI(生态安全指数),并根据ESI得分将水生态系统的安全评级分为安全(3.5≤ESI≤4.0)、较安全(2.5≤ESI<3.5)、一般(1.5≤ESI<2.5)、不安全(0.5≤ESI<1.5)和很不安全(0≤ESI<0.5)5个级别,构建了多指标的流域水生态安全评估方法.      

苏州市人为源氨排放清单及其分布特征

通过调研分析苏州大市范围内的农业、工业、生活及交通等相关活动水平数据,采用排放因子法建立了2013年苏州市人为源氨排放清单. 结果表明:2013年苏州市人为源氨排放总量为22 020.18 t,排放强度为3.06 t/km2;畜禽养殖、工业源、氮肥施用是苏州市氨排放的主要来源,排放量分别为8 080.99、7 103.50、4 841.23 t,共占氨排放总量的90.94%. 其中,工业源的氨排放分担率为32.25%,高于全国平均值,火电行业和化肥制造行业的氨排放占工业源排放总量的90.14%,烟气脱硝过程的氨逃逸值得关注;在畜禽源中,肉鸡和生猪是最大的氨排放源,二者排放量分别占畜禽养殖氨排放总量的42.59%和37.14%. 太仓、张家港、常熟依次为苏州市氨排放量和排放强度最大的3个地区,共占氨排放总量的69.02%,苏州市区氨排放量位列第四但排放强度最低. 空间分布特征表明,苏州市东北部氨排放较集中,中部排放量较小,周边地区特别是沿江县级市的排放量较大. 研究显示,氨排放清单的建立可为苏州市氨排放控制提供基础数据.