Effects of residual antibiotics in groundwater on Salmonella typhimurium: changes in antibiotic resistance, in vivo and in vitro pathogenicity

An outbreak-causing strain of Salmonella enterica serovar Typhimurium was exposed to groundwater with residual antibiotics for up to four weeks. Representative concentrations (0.05, 1, and 100 μg L(-1)) of amoxicillin, tetracycline, and a mixture of several other antibiotics (1 μg L(-1) each) were spiked into artificially prepared groundwater (AGW). Antibiotic susceptibility analysis and the virulence response of stressed Salmonella were determined on a weekly basis by using human epithelial cells (HEp2) and soil nematodes (C. elegans). Results have shown that Salmonella typhimurium remains viable for long periods of exposure to antibiotic-supplemented groundwater; however, they failed to cultivate as an indication of a viable but nonculturable state. Prolonged antibiotics exposure did not induce any changes in the antibiotic susceptibility profile of the S. typhimurium strain used in this study. S. typhimurium exposed to 0.05 and 1 μg L(-1) amoxicillin, and 1 μg L(-1) tetracycline showed hyper-virulent profiles in both in vitro and in vivo virulence assays with the HEp2 cells and C. elegans respectively, most evident following 2nd and 3rd weeks of exposure.     

Investigation of impact of environmental changes on precipitation pattern of Pakistan

In this paper, variability in precipitation pattern of Pakistan due to environmental and climatic changes has been studied. Maps have been generated to depict global precipitation variation. Precipitation data of 25 stations of Pakistan have been used. These data were taken from Meteorological Department, Islamabad, Pakistan. The results of two global climate models, namely Australia’s Commonwealth Scientific and Industrial Research’s third generation general circulation model and National Center for Atmospheric Research’s first generation precipitation circulation model for A2 scenario have been applied to investigate the changes. It is observed that precipitation pattern will change significantly in the future. The occurrence of precipitation in all seasons for Pakistan is expected to increase with almost uniform distribution across a season. Average annual precipitation of the country will undergo an increase in the range of +57 to +71 % as compared to average of the base period.     

Spatio-temporal variations in water quality of Nullah Aik-tributary of the river Chenab, Pakistan

This study reports the spatio-temporal changes in water quality of Nullah Aik, tributary of the Chenab River, Pakistan. Stream water samples were collected at seven sampling sites on seasonal basis from September 2004 to April 2006 and were analyzed for 24 water quality parameters. Most significant parameters which contributed in spatio-temporal variations were assessed by statistical techniques such as Hierarchical Agglomerative Cluster Analysis (HACA), Factor Analysis/Principal Components Analysis (FA/PCA), and Discriminant Function Analysis (DFA). HACA identified three different classes of sites: Relatively Unimpaired, Impaired and Less Impaired Regions on the basis of similarity among different physicochemical characteristics and pollutant level between the sampling sites. DFA produced the best results for identification of main variables for temporal and spatial analysis and separated eight parameters (DO, hardness, sulphides, K, Fe, Pb, Cr and Zn) that accounted 89.7% of total variations of spatial analysis. Temporal analysis using DFA separated six parameters (E.C., TDS, salinity, hardness, chlorides and Pb) that showed more than 84.6% of total temporal variation. FA/PCA identified six significant factors (sources) which were responsible for major variations in water quality dataset of Nullah Aik. The results signify that parameters identified by statistical analyses were responsible for water quality change and suggest the possibility of industrial, municipal and agricultural runoff, parent rock material contamination. The results suggest dire need for proper management measures to restore the water quality of this tributary for a healthy and promising aquatic ecosystem and also highlights its importance for objective ecological policy and decision making process.     

Benthic foraminifera from polluted marine environment of Sulaibikhat Bay (Kuwait)

Quantitative analyses of recent benthic foraminiferal assemblages (living and dead) were carried out on the surface sediments of Sulaibikhat Bay. Marked contrast in foraminiferal assemblages between the shallow tidal mudflats and the deep tidal channel and their relation to the extent of pollution were observed. Cluster analysis of quantitative data on the distribution of foraminiferal tests revealed three assemblages that depend mainly on the intensity of pollution; (1) a highly polluted tidal flat assemblage, (2) normal (or less polluted) mud flat assemblage and, (3) tidal channel and subtidal assemblage. The highly polluted assemblage characterized by a drop in species densities (< 100 tests/20 cm(3) sediment) but with high average diversity (5.8 Yule-Simpson Index). The microfauna of the less polluted flat displays relatively lower diversity (4.6) but high density of tests (47.2% of the total picked tests). The most abundant species of this assemblage is Ammonia tepida, displays its maximum density in this assemblage. Ammonia tepida drops in density from 17.12% to 3.07% in the polluted assemblage. Tidal channel foraminiferal assemblages should normally display lower diversities than those of tidal flats, because tidal current in the channels tend to wash away most nutrient materials. However, this is not the case of the present study area which could be due to environmental setting of the Sulaibikhat Bay in which tidal currents bring in exceptionally high amounts of nutrients from Shatt Al-Arab Estuary and in which the tidal flats are strongly and adversely polluted.     

Investigating the impacts of treated effluent discharge on coastal water health (Visakhapatnam,SW coast of Bay of Bengal,India)

The present study investigated the impacts of treated effluent discharge on physicochemical and biological properties of coastal waters from three pharmaceuticals situated along the coast of Visakhapatnam (SW Bay of Bengal). Seawater samples were collected (during the months of December 2013, March 2014 and April 2014) from different sampling locations (Chippada (CHP), Tikkavanipalem (TKP) and Nakkapalli (NKP)) at 0- and 30-m depths within 2-km radius (0.5 km = inner, 1 km = middle and 2 km?=?outer sampling circles) from the marine outfall points. Physicochemical and biological parameters, which differed significantly within the stations, were likely to be influenced by strong seasonality rather than local discharge. Dissolved oxygen variability was tightly coupled with both physical and biological processes. Phytoplankton cell density and total chlorophyll (TChla) concentrations were significantly correlated with dissolved inorganic nutrient concentrations. CHP (December) represented a diatom bloom condition where the highest concentrations of diatom cells, total chlorophyll (TChla), dissolved oxygen coupled with lower zooplankton abundance and low nutrient levels were noticed. The centric diatom, Chaetoceros sp. (>?50%) dominated the phytoplankton community. TKP (March) represented a post-diatom bloom phase with the dominance of Pseudo-nitzschia seriata; zooplankton abundance and nutrient concentrations were minimum. Conversely, NKP (April) represented a warm well-stratified heterotrophic period with maximum zooplankton and minimum phytoplankton density. Dinoflagellate abundance increased at this station. Relatively higher water temperature, salinity, inorganic nutrients coupled with very low concentrations of dissolved oxygen, TChla and pH were observed at this station. Copepods dominated the zooplankton communities in all stations and showed their highest abundance in the innermost sampling circles. Treated effluent discharge did not seem to have any significant impact at these discharge points.     

Residue determination and dissipation of ioxynil octanoate in maize and soil

A simple and efficient residue analysis method for direct determination of ioxynil octanoate in maize and soil was developed and validated with High Performance Liquid Chromatography-Ultra Violet (HPLC-UV). The samples were extracted with mixtures of acetonitrile and deionized water followed by Solid Phase Extraction (SPE) to remove co-extractives prior to analysis by HPLC-UV. The recoveries of ioxynil octanoate extracted from maize and soil samples ranged from 86 %-104 % and 84 %-96 %, respectively, with relative standard deviation (RSD) less than 7.84% and sensitivity of 0.01 mg kg(-1). The method was applied to determine the residue of ioxynil octanoate in maize and soil samples from experimental field. Data had shown that the dissipation rate in soil was described as pseudo-first-order kinetics and the half-life (t(1/2)) was less than 1.78 days. No ioxynil octanoate residue (<0.01 mg kg(-1)) was detected in maize at harvest time withholding period of 60 days after treatments of the pesticide. Direct confirmation of the analytes in field trial samples was realized by Liquid Chromatography-Mass Spectrometry (LC-MS).     

Influence of tetracycline exposure on the growth of wheat seedlings and the rhizosphere microbial community structure in hydroponic culture

In this study, the effects of tetracycline exposure on wheat growth and the microbial community structure in the rhizosphere were investigated under hydroponic culture conditions. Exposure to various concentrations of tetracycline resulted in significant suppression of the growth of wheat roots and shoots, with minimum doses of 0.8 mg L^?1 and 4 mg L^?1 resulting in inhibition rates of 32% and 15.4%, respectively. Complete inhibition of the growth of these two parts of wheat plants was observed in response to treatment with tetracycline at 20 mg L^?1 and 100 mg L^?1, respectively. However, the germination of wheat seeds was not sensitive to exposure to tetracycline. The effects of tetracycline exposure on the microbial community in the wheat rhizosphere were evaluated through traditional cultivation and molecular biological analyses. The cultivation results indicated that bacteria were the dominant population, being present in concentrations of 1× 10⁸–2.45× 10⁹CFUs mL^?1, although 39% to 87% inhibition occurred in response to tetracycline. The concentration of fungi increased in all tetracycline treated samples to 2.5 to 15.8 times that of the control. The highest concentration of fungi (4.27× 10⁸ CFU mL^?1) was observed in response to 60 mg L^?1 tetracycline after 15 days of cultivation. In this stage, a large amount of fungal colonies was observed on the surface of the culture solution, the wheat roots became rotted and the plants became atrophic or even died. Molecular biological analysis indicated that the bacterial community structure was significantly different in samples that were exposed to high levels of tetracycline (over 20 mg L^?1) than in samples that were exposed to lower concentrations. As the concentration of tetracycline increased, the diversity of the bacteria decreased. Additionally, several dominant sensitive species such as Sphingobacterium multivorum were suppressed by tetracycline, while some resistant species such as Acinetobacter sp. appeared or were conserved. The bacteria population tended to stabilize when the drug concentration exceeded 40 mg L^?1.     

The Bechtel Confined Zone dispersion Process for FGD Retrofit Situations Proof-of-Concept Tests

The Bechtel Confined Zone Dispersion (CZD) process for FGD retrofit situations was tested at two sites: one at a level of 5 MWe; the other at 70 MWe. The CZD process involves injecting a finely atomized slurry of hydrated lime into a straight run of duct between a boiler's air heater and its electrostatic precipitator (ESP). The effect of process variables on SO₂ removal and ESP performance was investigated for dolomitic/calcitic lime. Removals of SO₂ in excess of 50 percent were achieved for either lime type at the 5 MWe site. A very short duct length limited injection rate at the 70 MWe site, limiting sulfur removals to a maximum of 30 percent. SO₂ removal data for both sites were successfully correlated on a common basis. ESP performance was not fully acceptable during lime injection at both sites, but it is felt that optimization of ESP operations should eliminate this problem. Additional testing is recommended to further explore ESP performance and to optimize lime injection parameters. The results obtained to date continue to indicate that the CZD process is an attractive and economical candidate for FGD retrofit situations.     

Some Technical and Economic Aspects of Residual Fuel Oil Desulfurization

Combustion of residual, the most common type of fuel oil used in industrial and commercial steam generating plants, accounts for about 600,000 tons or 37 percent of the sulfur oxide emissions in New York state. On the average, residual oil available in New York state contains about 2.2 percent sulfur and is consumed at an annual rate of approximately 85 million barrels. The removal of sulfur from many types of residuals should become economically feasible as a result of the development of the HDS and H-Oil hydrodesulfurization processes. From studies recently made, these methods of desulfurization have been estimated to vary from a minimum of no appreciable increase in overall cost to a maximum of about one cent per gallon. The by-product distillates produced in hydrodesulfurization are a very significant factor in making the process economical and the demand for these is increasing at a greater rate than residual.