Efficacy of alum and coal combustion by-products in stabilizing manure phosphorus

Animal manures contain large amounts of soluble phosphorus (P), which is prone to runoff losses when manure is surface-applied. Here we report the efficacy of alum and three coal combustion by-products in reducing P solubility when added to dairy, swine, or broiler litter manures in a laboratory incubation study. Compared with unamended controls, alum effectively reduced readily soluble P, determined in water extracts of moist manure samples with 1 h of shaking, for all three manures. The reduction ranged from 80 to 99% at treatment rates of 100 to 250 g alum kg(-1) manure dry matter. The fluidized bed combustion fly ash (FBC) reduced readily soluble P by 50 to 60% at a rate of 400 g kg(-1) for all three manures. Flue gas desulfurization by-product (FGD) reduced readily soluble P by nearly 80% when added to swine manure and broiler litter at 150 and 250 g kg(-1). Another by-product, anthracite refuse fly ash (ANT), was ineffective for all three manures. In all cases, reduction in readily soluble P is primarily associated with inorganic phosphorus (P(i)) with little change in organic phosphorus (P(o)). Sequential extraction results indicate that the by-product treatments shifted manure P from H2O-P into a less vulnerable fraction, NaHCO3 - P, while the alum treatment shifted the P into even more stable forms, mostly NaOH-P. Such shifts in P fractions would have little influence on P availability for crops over the long-term but would retard and reduce potential losses of P following manure applications.     

The potential of rhizosphere microbes isolated from a constructed wetland to biomethylate selenium

The potential of rhizosphere microbes isolated from common reed [Phragmites australis (Cav.) Trin. ex Steud] plants grown in a subsurface-flow constructed wetland to biomethylate selenate or selenite was studied in liquid cultures under controlled conditions. Total mean percentages of volatilized Se from half-strength Hoagland culture solutions (low C content) supplemented with selenate or selenite and inoculated with cultured rhizosphere microbes after 15 d of incubation were 7.9 and 49.1%, respectively. There was a relative best fit (r = 0.87) between total number of rhizosphere and cultured microbes and the percentage of volatilized Se in Hoagland solution after 15 d of incubation. However, when the same microbes were cultured in tryptic soybean broth (TSB) medium (high C content), the percentages of volatilized Se from selenate and selenite were 1.3 and 1.9%, respectively. The volatilization percentages of Se from selenate or selenite in culture solutions inoculated with rhizosphere suspension instead of cultured rhizosphere microbes were very low (1.2-3.0%) in both cultivation media. In all experiments, selenite was volatilized significantly (p < 0.05) in higher amounts by cultured rhizosphere microbes after 15 d of incubation compared with selenate. Dissolved biomethylated dimethylselenide (DMSe) in water samples taken from the subsurface-flow bed was determined by purging with helium. The DMSe in water samples was indirectly detected up to 2.4 microg Se L(-1), which indicates that part of the produced DMSe was dissolved in the matrix before being released into the atmosphere. Our results show that rhizosphere microbes isolated from common reed plants have a high potential of Se biomethylation and volatilization from selenate and selenite.     

Eu3+ uptake by calcite: preliminary results from coprecipitation experiments and observations with surface-sensitive techniques

A lack of information in databases for contamination risk assessment about the transport behaviour of the trivalent f-orbital elements in groundwater systems where calcite is at equilibrium motivated this study of Eu(3+) uptake. The free drift technique was used to examine the effects of Eu(3+) concentration, presence of Na(+) or K(+) and temperature, as well as calcite nucleation and precipitation kinetics, on the partitioning of calcite. Changes in surface composition and morphology resulting from exposure of single crystals of Iceland spar to Eu(3+)-bearing solutions were observed with X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). First results confirm that calcite has high affinity for Eu(3+). Rates of nucleation and precipitation strongly affect the extent of uptake but the presence of Na(+) and K(+) has no effect, suggesting formation of solid solution as CaCO(3)-EuOHCO(3). Surface-sensitive techniques prove that Eu(3+) is adsorbed to calcite even when the surface is dissolving and adsorption is not accompanied by precipitation of a separate Eu(3+)-solid phase. Adsorbed Eu modifies calcite's dissolution behaviour, roughening terraces and rounding step edges, and producing surface morphology where some surface sites appear blocked. Results imply that Eu(3+) concentrations in natural calcites are limited by Eu(3+) availability rather than by a lack of ability to fit into calcite's atomic structure. This behaviour can probably be expected for other trivalent rare Earth elements (REE), actinides and fission products whose behaviour is similar to that of Eu(3+). These elements are likely to be incorporated within the calcite bulk in systems where it is precipitating and the demonstrated strong partitioning ensures some uptake even where calcite is at or under saturation.     

SEPTAGE QUALITY AND ITS EFFECT ON FIELD LIFE FOR LAND APPLICATIONS1

ABSTRACT: Maintenance of the more than 24 million septic tanks in the U.S. requires removal and disposal of septage. Disposal options include application to agricultural lands where the nutrients and organic matter can provide soil benefits. However, pathogens and contaminants are also contained in septage. An extensive search turned up very few data on septage quality, and those reveal high variability. The data used by the U.S. Environmental Protection Agency (EPA) in developing regulations had the lowest metal concentrations among the nine data sets that could be compared. Based on these data, EPA assumed that septage could be applied to agricultural land for more than 100 applications before reaching unacceptable cumulative loading of metals. They thus did not establish federal standards for metals in septage, and no monitoring is required under federal rules governing septage disposal. Analysis of the nine data sets we found showed that field site life would be reached in less than 100 applications for most septage and cumulative loading limits established by EPA for sewage sludges will be exceeded in 16 applications for some septage as opposed to the 100 application estimate used by EPA. Determination of acceptable cumulative loading depends on numerous technical and policy considerations. All septage sources reached the more restrictive loading limits such as those established by the New York State Department of Environmental Conservation (NYSDEC) and the recommendations in Cornell publications in less than 100 applications. In one case the cumulative limit for copper was exceeded in a single application. These findings suggest additional data are needed on septage quality and that the federal and state agencies responsible for regulating application of septage to agricultural land should reassess their standards.     

水解酸化-UASB-SBR组合法处理印染废水

根据印染废水的特性，提出了水解酸化－UASB－SBR组合法处理的处理方法。该不的实际应用表明，废水CDO用2500－4500mg/L降至80－150mg/L,BOD5，可由600－1000mg/L降至30-40mg/L，色度可由100－600倍降至50－60倍，该法具有以废治废，投资少，运用费用低，操作简单的特点。     

生物技术在废水处理中的应用

近年来我国排放的废水日益增多。造成的危害也直来越大。采用生物学方法处理废水具有许多明显的优点。介绍了一些生物学方法在废水处理中的应用进展情况。     

Biodegradation Behavior of Some Vegetable Oil-Based Polymers

The potential biodegradability of several vegetable oil-based polymers was assessed by respirometry in soil for 60–100 days at temperatures of 30–58°C. Films of soybean oil and linseed oil which were oxidatively polymerized (Co catalyst) on a kraft paper support were 90%–100% mineralized to CO₂ after 70 days at 30°C. Mineralization of polymerized tung oil to CO₂ was much slower than soy or linseed oils. Mineralization of epoxy resins made from epoxidized soybean oil (ESO) and aliphatic dicarboxylic acids was rapid while mineralization of similar resins made with a triacid (citric) was slower. There was no significant degradation of polyamine/ESO resins after 100 days at 58°C. Mineralization of the available carbon in vegetable oil polyurethanes and cationically polymerized ESO was less than 7.5% after 70 days at 30°C and 25 days at 55°C compared to 100% for soybean oil. From these results, it appears that triglycerides highly cross-linked with non-degradable linkages are not biodegradable to a significant extent while triglycerides cross-linked with hydrolysable bonds such as esters remain biodegradable.     

WETLAND BOUNDARIES IN THE NEW JERSEY PINELANDS: ECOLOGICAL RELATIONSHIPS AND DELINEATION1

Wetland protection regulations and guidelines often require the delineation of precise wetland boundaries on a case-by-case basis. In this study, conducted in the New Jersey Pinelands, an ecological characterization of vegetation composition, soil and hydrologic relationships along upland to wetland Pinus rigida - dominated transittions provided the basis for a multiparameter approach to wetland boundary delineation. The transitional data set was analyzed by direct gradient analysis, cluster analysis and ordination. It is concluded that vegetation composition can be a principal factor in delineating wetland boundaries along natural upland to wetland transitions. However, where distinct vegetation changes are not observed, a feature of our study sites, a multiparameter approach should be used.     

大庆油田道路交通噪声的相关分析

根据大庆油田主要交通干线噪声的监测结果与机动车流量、重车率、机动车运行速度及道路宽度等因素进行相关分析，找出了影响交通噪声的主要因素。回归分析表明：交通噪声与上述４个参数均呈正相关，其中机动车流量、道路宽度对交通噪声的影响较小，机动车运行速度对交通噪声的影响较大，对交通噪声影响最大的是重车率。根据分析结果，提出了交通噪声预测模式及控制交通噪声的建议。     

Effect of the Pretreatment with UV and Gamma Radiations on the Modification of Plywood Surface by Photocuring with Epoxy Acrylate

In order to further improve the physical properties of plywood surface that was pretreated with UV and Gamma radiation at different radiation intensities before photocuring. After pretreatment with radiation the plywood surface was coated with different prepared formulations containing epoxyacrylate (EA-1020) as an oligomer, difunctional monomers such as tripropylene glycol diacrylate (TPGDA), 2-hexadioldiacrylate (HDDA), Ethylene Glycol dimethacrylate (EGDMA) and trifunctional monomer trimethyl propen triacrylate (TMPTA) with photoinitiator Darocur 1664. Thin polymer films were prepared on glass plate with these formulated solutions and cured under UV radiation. Pendulum hardness (PH) and gel content of the film were studied for selecting the formulations as top coat and as base coat. The polished plywood surface was coated with selected formulation and cured under UV radiation. Various rheological properties of UV cured plywood surface such as pendulum hardness, scratch hardness, microgloss, adhesion strength, percentage chipped off area and abrasion resistance were studied.