天然石材产品放射性水平及其防护管理

简介了我国天然石材产品中放射水平、分类控制使用的现状以及应用天然石材装饰室内所致辐射对人体健康产生的不良影响，提出了加强对天然石材产品使用过程中的监督、监测和管理的建议。     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.     

一种特殊形状制件的成形工艺

对弹匣前口板这种特殊形状制件成形工艺进行了讨论,找到了一种具有较高材料利用率,较高生产效率及简便易行的成形方法.     

楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。     

我国尖音库蚊种团抗药性现状——兼论半数致死剂量与区分剂量的关系

本文报告我国尖音库蚊种团幼虫对六种杀虫剂近年发生抗性情况,共调查16省市的32个地区。结果多数地区对有机磷酯类的敌百虫发生抗性,对马拉硫磷和杀螟硫磷抗性区较小,程度亦较低。对二二三抗药也较普遍。结果都用LC_(50)和WHO的抗性等级表示。     

圆杯—多边形杆复合挤压的上限研究

此文采用三次多项式表示的流线速度场和基元圆环技术相结合的混合流动模型对国杯—多边形截面杆型复合挤压进行了上限分析,得到挤压力的上限解,分析了杆部截面形状对复合挤压分流点位置及变形力的影响规律并对理论计算进行了实验验证.     

ASM1中废水和污泥组分浓度的测定方法研究

对呼吸计量法应用于校准ASM1作了简明的阐述。在呼吸速率与模型组分关系的基础上,介绍了ASM1中废水与污泥各组分浓度的测定方法,并指出模型组分细化的意义。     

楔横轧轴肩的成形曲面的设计

此文分析在二辊楔横轧中轧制各类轴肩的过程。在假想工件轴端固定的图上确定楔侧面截面轮廓形状,再通过叠加轴向刚性移动量确定各截面实际位置,比较直观简便地设计出轧制轴肩的辊面上的成形曲面。最后归纳了设计步骤。     

后扣板冷挤压工艺及模具

此文分析了产品成形的特点,模具承载的负荷特点,从而在成形工艺上、润滑上、模具结构及选材上采取了相应的措施.用H-4水基高分子润滑剂和3Cr2W8V制作冷挤压模都取得了明显效果.