基于实测的燃煤电厂细颗粒物排放特性分析与研究

选取我国6个有代表性的燃煤电厂对烟尘、PM10和PM2.5的排放情况进行实测,根据所测数据计算各电厂对烟尘、PM10和PM2.5除尘效率以及排放因子,并分析得到其排放特性.6个受检燃煤电厂静电除尘及湿法脱硫设备对烟尘总除尘效率最高为99.88%,最低为99.75%,平均去除率为99.82%;除尘前,烟气中PM10含量范...     

利用PCR-DGGE溯源典型农村塘坝饮用水中的污染

以华南地区典型农村塘坝饮用水为研究对象,采用基于大肠杆菌的两种特异性基因(β-D-葡萄糖苷酶编码基因uidA和膜外周磷通道蛋白编码基因phoE)的群体差异分析(PCR-DGGE),对饮用水中的污染情况进行了溯源研究.结果表明,采用富集培养的混合菌体DNA作为模板扩增大肠杆菌特异性基因更加实用.uidA和phoE的引物均...     

Removal of copper ions from aqueous solution by calcium alginate immobilized kaolin

Kaolin has been widely used as an adsorbent to remove heavy metal ions from aqueous solutions. However, the lower heavy metal adsorption capacity of kaolin limits its practical application. A novel environmental friendly material, calcium alginate immobilized kaolin (kaolin/CA), was prepared using a sol-gel method. The e ects of contact time, pH, adsorbent dose, and temperature on Cu2+ adsorption by kaolin/CA were investigated. The Langmuir isotherm was used to describe the experimental adsorption, the maximum Cu2+ adsorption capacity of the kaolin/CA reached up to 53.63 mg/g. The thermodynamic studies showed that the adsorption reaction was a spontaneous and endothermic process.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Arsenic removal from groundwater by acclimated sludge under autohydrogenotrophic conditions

Arsenic in the environment is attracting increasing attention due to its chronic health effects. Although arsenite(As(III)) is generally more mobile and more toxic than arsenate(As(V)), reducing As(V) to As(III) may still be a means for decontamination, because As(III) can be removed from solution by precipitation with sulfide or by adsorption or complexation with other metal sulfides. The performance of As(V) bio-reduction under autohydrogenotrophic conditions was investigated with batch experiments. The results showed that As(V) reduction was a biochemical process while both acclimated sludge and hydrogen were essential. Most of the reduced arsenic remained in a soluble form, although 20% was removed with no addition of sulfate, while 82% was removed when sulfate was reduced to sulfide. The results demonstrated that the reduced arsenic was re-sequestered in the precipitates, probably as arsenic sulfides. Kinetic analysis showed that pseudo first-order kinetics described the bio-reduction process better than pseudo second-order. In particular, the influences of pH and temperature on As(V) reduction by acclimated sludge under autohydrogenotrophic conditions and total soluble As removal were examined. The reduction process was highly sensitive to both pH and temperature, with the optimum ranges of pH 6.5–7.0 and 30–40°C respectively. Furthermore, Arrhenius modeling results for the temperature effect indicated that the As(V) reduction trend was systematic. Total soluble As removal was consistent with the trend of As(V) reduction.     

重金属抗性解磷细菌的磷溶解特性研究

从湖南省湘西州花垣县的铅锌矿表层土壤中,筛选出两株具有重金属抗性和解磷特性的细菌T PSB1和T PSB2.通过16S rRNA基因序列比对,分别鉴定为嗜麦芽寡养单胞菌(Stenotrophomonas maltophilia)和唐菖蒲伯克霍尔德菌(Burkholderia gladioli).T PSB1和T PSB2在含有难溶性无机磷液体培养基中,其上清液的可溶性磷含量最高分别达到了402.9 mg·L-1和589.9 mg·L-1;在难溶性有机磷固体和液体培养基中,固体平板上均出现解磷圈,而液体培养基上清液中,可溶性磷含量也分别达到了2.97 mg·L-1和4.69 mg·L-1.另外,两株细菌对重金属Zn2+的抗性最高,在其浓度为2000 mg·L-1固体和液体培养基条件下均可以生长,磷溶解浓度分别为114.8 mg·L-1和125.1 mg·L-1.而在含铬和铅的浓度为1 000 mg·L-1的液体培养基中,两株细菌同样表现出重金属抗性.在Pb2+浓度为1000 mg·L-1的液体培养基中,磷溶解浓度分别达到了57.9 mg·L-1和71.7 mg·L-1;而在Cr2+浓度为1000 mg·L-1的培养基中磷溶解浓度分别为60.1 mg·L-1和98.4 mg·L-1.     

陶粒CANON反应器的接种启动与运行

通过CANON接种污泥,以人工配制无机高氨氮废水为对象,研究以陶粒为填料的CANON反应器启动与运行情况,结果表明:①陶粒可以作为CANON反应器合适填料,温度通过水浴控制在30℃±1℃,HRT为9 h、pH控制在7.00~8.08之间,经过60 d成功启动了CANON反应器,TN的去除负荷达到0.79 kg·(m3·d)-1;②在温度30℃时,陶粒CANON反应器中临界DO范围在1.12~1.69 mg·L-1之间,CANON反应器中短程硝化和厌氧氨氧化性能可维持稳定,高于此范围时,会出现CANON反应器中短程硝化不稳定现象;③在温度25℃,控制DO在1.01~1.54 mg·L-1之间时,尽管NO-3-N变化值与TN变化值的比值(δNO-3-N/δTN)略微偏离理论值0.127,为0.150~0.204,但CANON反应器脱氮性能趋于稳定,TN去除率最高为75.56%,TN的去除负荷最高达到0.97 kg·(m3·d)-1,这意味着CANON工艺的适宜温度范围至少可以降低至25℃.     

金山湖闸坝型水体表层沉积物重金属分布特征及生态风险评价

采集金山湖闸坝型水体表层沉积物,经HNO3-HF-HClO4消解后,通过电感耦合等离子质谱法(ICP)测定沉积物As、Cu、Pb、Cd、Zn、Cr等6种重金属含量,通过富集系数、地累积指数法、潜在生态风险评价以及溯源分析等对沉积物重金属的分布特征进行综合评价.结果表明:1金山湖表层沉积物As、Pb、Cu、Zn、Cr、Cd的平均值分别为23.22、26.20、24.42、143.12、245.30、0.67 mg·kg-1,其中,Pb、Cu含量低于土壤环境质量标准一、二级标准,Zn、Cr含量介于土壤环境质量标准一级标准与二级标准之间,As、Cd含量均超过土壤环境质量标准一、二级标准;从空间分布来看,Pb和Zn在北固山广场的1号样点形成最高值,As、Cu、Cr、Cd的含量分别在镇润洲码头附近的12号样点、运粮河河口区域的3号样点、湖中靠近征润州岛的14号样点、春江潮与解放路泵站之间往湖中心处的7号样点处出现最高值.2富集系数表现为As>Cr>Cd>Pb>Zn>Cu,表明金山湖表层沉积物中As的富集量最大,Cu最小.3根据地累积指数判断,金山湖未受Cu的污染,Pb、Zn、Cd则为轻度污染,As、Cr表现为偏中度污染;46种重金属的单项潜在生态危害系数表现顺序为Cd>As>Cr>Pb>Cu>Zn,其中,Cr、Pb、Cu、Zn均为轻微生态危害程度,As和Cd处于中等生态危害程度;从全湖分布看,北固湾广场附近(1号样点)、春江潮与解放路泵站之间靠近岸边区域(6号样)、春江潮与解放路泵站之间往湖中心处(7号样点)以及镇润洲码头附近(12号样点)样点的潜在生态危害为中等,其余采样点均为轻微潜在生态危害;5主成分分析结果表明,金山湖沉积物重金属的差异除了受到各样点沉积物环境背景值的影响外,还与各采样点周围人为活动、外源污水排放等有密切关系.6本次研究中发现闸坝对金山湖沉积物重金属分布的影响不明确,该部分内容尚需进行长时间尺度的研究.     

基于物元分析的表层岩溶带“二元”水生态承载力评价

针对目前水生态承载力评价中信息屏蔽和主观性问题,该文以喀斯特典型分布区贵州省为例,在阐述表层岩溶带"二元"水生态承载力概念的基础上,构建表层岩溶带"二元"水生态承载力评价指标体系,结合物元分析法,对贵州省2007—2010年的表层岩溶带"二元"水生态承载力进行定量评价.研究结果表明:2007—2010年贵州省表层岩溶带"二元"水生态承载力等级都为"可承载",整体呈现出比较稳定的发展趋势,但是"可承载"水平并不稳定,不完全符合No2的标准."可承载"水平不稳定.贵州省表层岩溶带"二元"水生态承载力的主要提升因子是地表产流率、输沙模数、森林覆盖率、水资源利用率等8个,而单位面积地表水资源量、生态用水率、工业废水排放达标率、工业固体废物综合利用率以及城镇化率等9个成为制约贵州省表层岩溶带"二元"水生态承载力等级提升的因子.贵州省的表层岩溶带"二元"水生态承载力不仅关系到自身的社会、经济和生态安全也关系到下游的长江流域和珠江流域的水资源安全、生态安全以及环境建设.因此,应制定区域生态补偿措施,经济发达地区反哺经济落后地区,形成联动的共同保护生态环境脆弱区的水生态承载力的机制.为促进贵州省的水土资源开发利用和生态环境建设提供理论借鉴,并为类似地区的水生态承载力评价提供了一种新方法.     

天津地区相对海平面变化最新进展及发展趋势分析

相对海平面上升是一个缓慢、渐进过程,但长期的积累可以使得上升幅度相当可观,从而加剧风暴潮、海岸侵蚀、海水入侵和咸潮等灾害致灾程度。基于验潮位监测和卫星观测结果显示,全球海平面在20世纪中期平均上升1.5~2.0 mm/a,而近30年中国沿海海平面上升速率为2.6~2.7 mm/a,高于全球平均值。渤海湾天津地区由于地面沉降显著,而导致相对海平面大幅度上升。滨海地区地面沉降速率在未来50至100年内可能会稳定在1.0~2.0 cm/a范围,结合目前海平面上升速率2.7 mm/a,总的相对海平面上升速率处于12.7~22.7 mm/a范围。由此估计,到2050年,天津地区相对海平面将比2012年高出48.3~86.3 cm,而到2100年,将比2012年高出111.8~199.8 cm。