沸石渗滤床在城市初期雨水径流污染控制的应用研究

根据城市初期雨水径流的污染负荷初始冲刷效应以及主要污染物COD和N/P与SS成线性相关性的污染特点,对初期雨水的主要污染物COD和N/P开展了控制技术研究。以示范工程为基础,研究城市初期雨水径流污染控制的强化处理技术即沸石渗滤床技术,运行结果表明,对NH3-N、TP、COD都有较好的去除效果,其中对NH3-N的去除效果较为明显,进水氨氮浓度在2～5 mg/L,出水都能达到地表IV类水标准(NH3-N≤0.5 mg/L)。     

清浊分流条件下的混凝-臭氧处理棉针织印染清废水

根据污染源头控制和废水回用的要求,对典型棉针织染整厂的不同生产过程废水排水水质特征进行了统计分析,提出了较实用的废水源头清浊分流方案。在此基础上重点研究了混凝-臭氧组合工艺对清废水处理效果,确定了最优的工艺条件。结果表明,清废水主要为洗水,占废水总量的25%～30%;混凝-臭氧组合工艺的最优工艺条件为：pH为6～9,PAC投加量为48 mg/L,PAM投加量为1.0 mg/L,臭氧接触时间为12 min（臭氧浓度为14.5 mg/L）,这时,清废水COD、色度去除率分别为71%和98%,实践证明,出水水质完全能够满足染整生产。     

全球绿色低碳发展与公平的国际制度建设

在可持续发展和扶贫框架下发展绿色经济与国际可持续发展制度建设及改革是当前世界可持续发展的核心和关键,也是"里约+20"峰会的两个主题。首先,绿色经济是体现经济社会与资源环境相协调和可持续发展的根本途径。绿色经济的核心是以低的自然资源消费、低排放、低污染,达到高的自然资源利用效益,实现高的经济社会发展水平,提供高的生活水平和优良的生活环境。全球绿色经济的发展潮流,将引发社会形态由"工业文明"向"生态文明"转变。虽然经济发展和消除贫困是发展中国家当前首要和压倒一切的优先任务,但也必须探索新型的绿色低碳工业化和现代化道路,在实现工业文明的过程中,努力建设生态文明,实现跨越式发展。同时积极应对全球绿色低碳转型中新的经济、贸易、技术竞争规则和格局的变动,加强先进技术创新,提升自身的低碳竞争力。其次,公平获取可持续发展的理念,应成为国际可持续发展制度建设和改革的基本原则。可持续发展要求既要促进经济社会发展与资源环境相协调,促进"代际公平",又要关注欠发达地区消除贫困,提高生活质量,改善生态环境,实现"国别公平"、"人际公平"。因此,国际可持续发展制度框架的建设和改革,要体现世界各国公平获取可持续发展的理念和原则,全面均衡地反映不同国情和发展阶段国家的利益诉求。主要表现在公平享有全球环境空间、公平获得现代优质能源服务、公平适应全球环境变化、公平承担责任义务及公平的国际制度和机制。中国需要统筹国内外两个大局,走中国特色的绿色低碳发展之路。最后,中国的国情和发展阶段特征,在可持续发展领域又面临比发达国家更多的困难和更严峻的挑战。在全球发展绿色经济,努力实现可持续发展的大背景下,中国要统筹国际国内两个大局,协调推进。在国际上积极参与国际制度的建设和改革,在促进全球经济发展,社会进步和环境保护等方面发挥积极的建设性的作用。在国内加强可持续发展战略的实施,走绿色、低碳和可持续发展的路径。主要战略对策包括加速转变发展方式,强化节能优先,控制能源消费总量和CO2排放总量的过快增长;加强能源结构的低碳化,逐步建立并形成以新能源和可再生能源为主体的可持续能源体系;加强城乡统筹,地区平衡,促进生态城市建设;适应国际可持续发展制度改革的趋势,加强绿色低碳和可持续发展的制度建设;抓住机遇,顺应世界绿色低碳发展潮流,自主实现发展方式的转变,把传统的资源依赖型、粗放扩张的发展方式转变到新型的技术创新型、内涵提高的发展方式上来,基本走上绿色低碳和可持续发展的轨道。     

中国陆上油藏CO2封存潜力评估

CO2捕集与封存是减缓气候变化的一种关键的碳减排选择方案。将CO2注入油藏作为一种碳埋存方式引起广泛关注。作为判断某一国家、某一区域或某一具体储层是否适合CO2地质封存开展的重要依据之一,有必要在规划碳捕集与封存(CCS)项目前,对潜在的封存库进行封存潜力评估。本文在已有可公开的地质资料的基础上,评估了中国陆上216个油田实施CO2地质封存的潜力,并与相关研究结果进行了比较。结果表明:在满足埋存深度大于800 m的筛选条件下,当假设我国陆上油田全部用于CO2-EOR时,CO2封存潜力约3.6 Gt;当陆上油田全部视为废弃油藏处理时,CO2理论封存潜力约4.6 Gt。其中,东北和华北地区油藏封存CO2潜力巨大,占陆上油田CO2封存总量的60%以上;同时这里CO2集中排放源分布密集,排放源和封存地间的匹配性良好,可以减少CO2运输和封存成本。在这两个地区可以优先考虑实施油藏封存CO2项目。     

基于双层优化模型的流域初始二维水权耦合配置

结合新时期我国实行的最严格水资源管理制度,基于用水总量控制、用水效率控制、水功能区限制纳污三条红线控制约束条件,将流域初始取水权与排污权作为研究对象,根据流域初始水权配置的主从递阶思想,构建流域初始二维水权耦合配置的双层优化模型,实现流域初始取水权与排污权在不同区域及其不同部门之间的合理配置。从经济角度体现流域整体的经济效益最大化,从社会角度体现流域内区域之间的协调发展,从生态角度体现流域允许最大水污染物排放总量的严格控制。最终,实现流域初始水权配置中社会、经济以及生态目标的集成化,水资源数量与质量的相统一,提高流域内不同区域不同用水部门的用水效率、水污染物排放绩效,消除流域内不同区域之间的用水矛盾、水污染物排放冲突。并基于交互式决策理论,提出基于满意度的主从递阶交互式迭代算法对流域初始水权配置模型进行求解。结合案例分析,进一步验证了模型的有效性与算法的可行性。     

Chilled ammonia process for CO2 capture

The chilled ammonia process absorbs the CO₂ at low temperature (2–10 °C). The heat of absorption of carbon dioxide by ammonia is significantly lower than for amines. In addition, degradation problems can be avoided and a high carbon dioxide capacity is achieved. Hence, this process shows good perspectives for decreasing the heat requirement. However, a scientific understanding of the processes is required. The thermodynamic properties of the NH₃–CO₂–H₂O system were described using the extended UNIQUAC electrolyte model developed by Thomsen and Rasmussen in a temperature range from 0 to 110 °C and pressure up to 100 bars. The results show that solid phases consisting of ammonium carbonate and bicarbonate are formed in the absorber. The heat requirements in the absorber and in the desorber have been studied. The enthalpy calculations show that a heat requirement for the desorber lower than 2 GJ/ton CO₂ can be reached.     

Quantitative evaluation of the chilled-ammonia process for CO2 capture using thermodynamic analysis and process simulation

There is strong world-wide interest in developing new and improved processes for post-combustion capture of CO₂, often using chemical absorption. Developers of new processes make positive claims for their proposals in terms of low energy consumption, but these are usually difficult to validate. This paper demonstrates that rigorous application of thermodynamic analysis and process simulation provides a powerful way to quantitatively estimate the energy requirements of CO₂-capture processes by applying the methodology to the analysis and evaluation of the chilled-ammonia process.     

CCS scenarios optimization by spatial multi-criteria analysis: Application to multiple source sink matching in Hebei province

A method, based on spatial analysis of the different criteria to be taken into consideration for building scenarios of CO₂ capture and storage (CCS), has been developed and applied to real case studies in the Hebei province. Totally 88 point sources (42 from power sector, 9 from iron and steel, 18 from cement, 16 from ammonia, and 3 from oil refinery) are estimated and their total emission amounts to 231.7 MtCO₂/year with power, iron and steel, cement, ammonia and oil refinery sharing 59.13%, 25.03%, 11.44%, 3.5%, and 0.91%, respectively. Storage opportunities can be found in Hebei province, characterised by a strong tectonic subsidence during the Tertiary, with several kilometres of accumulated clastic sediments. Carbon storage potential for 25 hydrocarbon fields selected from the Huabei complex is estimated as 215 MtCO₂ with optimistic assumption that all recovered hydrocarbon could be replaced by an equivalent volume of CO₂ at reservoir conditions. Storage potential for aquifers in the Miocene Guantao formation is estimated as 747 MtCO₂ if closed aquifer assumed or 371 MtCO₂ if open aquifer and single highly permeable horizon assumed. Due to poor knowledge on deep hydrogeology and to pressure increase in aquifer, injecting very high rates requested by the major CO₂ sources (>10 MtCO₂/year) is the main challenge, therefore piezometry and discharge must be carefully controlled. A source sink matching model using ArcGIS software is designed to find the least-cost pathway and to estimate transport route and cost accounting for the additional costs of pipeline construction due to landform and land use. Source sink matching results show that only 15–25% of the emissions estimated for the 88 sources can be sequestrated into the hydrocarbon fields and the aquifers if assuming sinks should be able to accommodate at least 15 years of the emissions of a given source.     

Bio-immobilization of Cu and Zn in recirculated bioreactor landfill

Purpose  

To protect the environmental quality of soil, groundwater, and surface water near the landfill site, it is necessary to make an accurate assessment of the heavy metal mobility. This study aims to present the bio-immobilization behavior of heavy metals in landfill and provide some reference suggestion for the manipulation of heavy metal pollution control after closure.     

Comparison of land-use regression models between Great Britain and the Netherlands

Land-use regression models have increasingly been applied for air pollution mapping at typically the city level. Though models generally predict spatial variability well, the structure of models differs widely between studies. The observed differences in the models may be due to artefacts of data and methodology or underlying differences in source or dispersion characteristics. If the former, more standardised methods using common data sets could be beneficial. We compared land-use regression models for NO₂ and PM_10, developed with a consistent protocol in Great Britain (GB) and the Netherlands (NL).Models were constructed on the basis of 2001 annual mean concentrations from the national air quality networks. Predictor variables used for modelling related to traffic, population, land use and topography. Four sets of models were developed for each country. First, predictor variables derived from data sets common to both countries were used in a pooled analysis, including an indicator for country and interaction terms between country and the identified predictor variables. Second, the common data sets were used to develop individual baseline models for each country. Third, the country-specific baseline models were applied after calibration in the other country to explore transferability. The fourth model was developed using the best possible predictor variables for each country.A common model for GB and NL explained NO₂ concentrations well (adjusted R² 0.64), with no significant differences in intercept and slopes between the two countries. The country-specific model developed on common variables for NL but not GB improved the prediction.The performance of models based upon common data was only slightly worse than models optimised with local data. Models transferred to the other country performed substantially worse than the country-specific models. In conclusion, care is needed both in transferring models across different study areas, and in developing large inter-regional LUR models.