发光细菌法在水质综合毒性在线检测中的应用

以海洋发光细菌费氏弧菌（Vibriofischeri）作为检测生物,采用冻干菌粉快速复苏技术,研究费氏弧菌在水质检测中的最佳测试温度和有效性测试条件,并对硫酸锌等多种毒物和几种实际水样进行发光抑制作用分析。研究表明,费氏弧菌冻干粉复苏菌液保存在2～5℃条件下能有效测试7d,最佳测试温度为15℃,最佳测试时间为15min。氯化汞、硫酸锌、硫酸镉等重金属和苯胺、多菌灵、甲醛等有机毒物对费氏弧菌均具有较强的光抑制作用,也即费氏弧菌对以上毒物较为敏感,并能够连续7d保持对同一浓度硫酸锌的敏感性较为一致。对几种实际水样的测试和分析表明,以费氏弧菌为指示生物的发光细菌法能够应用于水质环境安全的综合毒性在线监测预警中。     

A bibliometric analysis of solid waste research during the period 1993–2008

This study is a bibliometric analysis of solid waste research to evaluate the current trends, using the literature in the Science Citation Index (SCI) database from 1993 to 2008. Analyzed aspects included document type, language, and publication output as well as distribution of journals, subject category, countries, institutes, title-words, author keywords, and ‘Keywords Plus’. An evaluating indicator, h-index, was applied to characterize the solid waste publications. The trend of publication outputs during 1993–2008 coincided with a power and an exponential model. Based on the exponential model during 2001–2008, the number of articles on solid waste in 2013 is predicted to be twice that in 2008. The most common subject category is environmental science and the most productive journal is Waste Management. The USA with most publications and China with the highest growth rate were compared. Finally, author keywords, words in title, and ‘Keywords Plus’ were analyzed to provide research emphasis. The results showed that mainstream research was centered on the following methods: recycling, landfilling, composting and waste-to-energy. Heavy metals, fly ash and sewage sludge were considered recent research hotspots.     

The effects of activated Al2O3 on the recycling of light oil from the catalytic pyrolysis of waste printed circuit boards

The effects of employing activated Al₂O₃ during the catalytic pyrolysis of waste printed circuit boards (WPCBs) are investigated, focusing on the recycling of light oil. Variations in the pyrolysis process are studied through analysis of the phase distribution, water content and boiling point fractions of the resulting products. Product composition and carbon number distribution are analyzed using gas chromatography techniques. The use of activated Al₂O₃ increases the light oil fraction and also reduces the quantity of brominated products formed. It was determined that the best yield of light oil and most efficient debromination resulted from catalytic pyrolysis at 600 °C. Applying catalyst-to-feed ratios in the range of 1.0–1.5 also maximizes the yield of light oil. The major oil fraction resulting from catalytic pyrolysis has a boiling point range of 0–250 °C and carbon number range of C6–C9, showing for use as a potential fuel after suitable treatment such as hydrogenation. At a higher catalyst-to-feed ratio of 2.0, activated Al₂O₃ generates a high proportion of light oil fractions containing a significant quantity of chemicals such as phenol (52.67% at 600 °C), although an overall lower yield of oil is obtained. The oil produced in this manner may also be used as a raw material feedstock for the production of various other useful chemicals.     

深圳市工业区VOCs污染特征与臭氧生成敏感性

于2020年9~10月在深圳北部典型工业区开展在线观测以分析该地VOCs污染状况,并使用基于观测的模型(OBM)研究臭氧生成敏感性.观测期间VOCs的总浓度为48.5×10^-9,浓度水平上烷烃>含氧有机物(OVOCs)>卤代烃>芳香烃>烯烃>乙炔>乙腈.臭氧生成潜势(OFP)为320μg/m³,其中芳香烃、OVOCs以及烷烃贡献最大,这3类物种OFP贡献总和超过90%.乙烯与苯呈现“两峰一谷”的日变化特征,主要受到机动车排放的贡献.相对增量反应性(RIR)分析表明,削减人为源VOCs对控制当地臭氧生成最为有效,当中又应优先控制芳香烃;经典动力学曲线(EKMA)分析表明该片区臭氧生成处于过渡区,在开展VOCs区域联防联控的同时,需要在当地进行有力的NOx控制以强化该地区臭氧污染长期管控.     

PM2.5与O3协同控制视角下深圳市工业VOCs源谱特征

选取深圳8类典型工业行业开展VOCs样品采集,检测分析了100种VOCs组分,从PM_2.5和O₃协同控制的角度分析了不同污染源的成分谱特征和对环境的影响.结果表明：加油站源谱组成以烷烃（48.4%）占主导,OVOCs （27.6%）占比突出,乙酸乙酯（14.1%）、异戊烷（13.0%）、正戊烷（12.0%）为其优势排放物种;涂料制造、胶黏剂生产、油墨制造、化工制品、纺织印染、医药制造行业排放组成均以OVOCs （42.3%~97.1%）占主导,丙酮为大多数行业的优势物种,且乙腈在部分行业中占比突出.垃圾发电行业以OVOCs （33.9%）和卤代烃（28.3%）占主导,乙醛（13.4%）、丙酮（11.0%）、一氯甲烷（6.1%）为该行业排放的优势物种.以PM_2.5和O₃协同控制为导向,芳香烃和烯烃是储存运输源需要控制的重点;OVOCs和芳香烃都应成为工艺过程源和废弃物处理源控制的关键.涂料制造行业的源反应活性SR_O3和SR_SOA值分别为6.0g/g和1.2g/g,削减单位质量排放的VOCs所减少的PM_2.5和O₃生成潜势最多,应成为深圳市PM_2.5和O₃协同控制下的优先控制行业.     

城市轨道交通上盖物业振动影响评价标准选取探讨

对现行的振动评价标准中相关问题进行分析,认为VLzmax和VLz10分别作为城市轨道交通列车振动和环境振动背景评价量是合理的。并对标准JGJ/T 170-2009应用提出了建议。     

活化过硫酸盐对市政污泥调理效果的影响

常规污泥脱水技术只能将市政污泥含水率降到80%左右,难以满足日益严格的污泥处理处置要求.活化过硫酸盐产生硫酸根自由基SO4·-具有强氧化性,可用于破坏污泥的絮体结构.本研究利用Fe2+活化过硫酸钠(SPS)的方法进行污泥调理,以到达改善污泥的脱水性能的目的.结果表明,当Fe2+与S2O2-8投加量(以绝干污泥计)分别为25.88 mg·g-1、80 mg·g-1(Fe2+与S2O2-8摩尔比为1.1∶1)时,污泥毛细吸水时间CST和污泥比阻SRF降低率最大,滤液中蛋白质和多糖浓度达到最大.进一步的研究表明,污泥Zeta电位值由负向正变化,颗粒比表面积增大,絮体由密集的团状变成结构松散的层状结构,污泥脱水性能提高.     

深圳城市大气中非甲烷烃季节变化特征

应用GCMS-QP2010对深圳2015~2016年4个季节大气56种非甲烷碳氢化合物（NMHCs）进行在线监测分析.从成分来看,四季总NMHCs平均浓度为23.6×10^-9,呈现出冬季 > 秋季 > 夏季≈春季的变化特征,其中烷烃比例最高（65.4%~74.7%）,其次是芳香烃（13.3%~21.7%）和烯烃（7.1%~11.6%）,丙烷、甲苯、乙烷、正己烷、正丁烷、乙炔、2-甲基戊烷、异丁烷、乙烯和3-甲基戊烷是浓度最高的10个物种.相关性和日变化分析表明,深圳大气中NMHCs受到机动车、溶剂挥发相关工业源以及植物释放等多重来源的共同影响,其中甲苯、2-甲基戊烷、3-甲基戊烷和正己烷受工业源影响最为显著,而异戊二烯主要来自于天然源.     

Testing interpolation and filtering techniques in connection with a semi-Lagrangian method

In air pollution models, semi-Lagrangian methods are often used to solve the advective part of the corresponding model equations. Interpolation is an essential part of these methods. In this paper, five different interpolation methods will be discussed and results of numerical experiments will be presented. To keep the concentration field non-negative, filtering techniques are used. A monotone interpolation method is also examined.     

改善深圳河水质的补水方案及生态影响初步分析

深圳河旱季天然径流量小而污染负荷高,为了改善河流水质,在削减入河污染物的同时有必要采取补水措施。利用水质模型,计算了不同污水处理率下,分别以污水资源化再生水、珠江口海水和大鹏湾海水为补水水源时,深圳河达到基本不黑臭所需的补水量。讨论了补水方案对河流水质、盐度、水动力条件的改变及其对生态系统的影响。研究表明,引海水对河流生态系统的冲击不容忽视。而污水资源化是较优的补水方案。