铀在土壤中的吸附动力学

以四川盆地红层丘陵区涪江河谷两岸广泛分布的第四系中更新统亚粘土为对象,用动态法测定了铀在该土壤中的平衡吸附量,为极低放废物的处置提供一些理论依据。研究了流速、土壤粒度及铀溶液初始浓度对土壤吸附铀的影响,并用常用的吸附动力学方程对实验数据进行了拟合。结果表明：土壤粒度小的平衡吸附量较大;流速越小、平衡吸附量越大;铀溶液的初始浓度越大,平衡吸附量越大;在用动力学方程拟合时,E lovich方程的拟合度最好;该土壤对铀的最大吸附率为61.1%,吸附性能较差。     

绵阳市大气污染物浓度变化特征及相关性分析

随着我国工业化、城市化和机动化的高速发展,大气环境质量越来越受民众关注,我国已建成国控—省控—市控—县控四级环境空气自动监测网络,监测项目包括SO2、NO2、CO、O3、PM2.5和PM10.基于2018年绵阳市环境空气监测数据、颗粒物化学组分及气象资料分析上述6个监测项目年均、季度、月均、日均及每日最大小时浓度变化特征,并进一步探讨污染物浓度与气象条件的相关性,结合颗粒物化学组分对产生原因进行剖析.结果表明:绵阳市冬季环境空气质量较差,夏季相对较好.Pearson相关性分析表明:SO2、NO2、CO和颗粒物(PM2.5和PM10)之间存在显著相关性,冬季PM2.5与SO2、NO2的相关系数分别为0.610和0.635,PM10与SO2、NO2的相关系数分别为0.655和0.655,颗粒物主要化学组分为硫酸盐、硝酸盐、铵盐和二次有机气溶胶,颗粒物二次转化尤为明显,冬季需重点管控颗粒物;春季和夏季O3与PM2.5、PM10呈显著正相关,需做好颗粒物和O3的协同管控.O3每日最大小时浓度多集中在13:00?—?18:00,其他污染物每日最大小时浓度多集中于08:00?—?12:00和20:00?—?24:00,同时NO2在20:00?—?24:00出现每日最大小时浓度的频次占67.1％,控制机动车等污染源排放尤为重要.     

煤炭资源型城市环境效率及其环境生产率变动分析──基于山西省11个地级市面板数据

绿色环境效率反映经济发展与资源环境之间的平衡关系,合理评价资源型城市的环境效率对于促进经济高质量发展具有重要的现实意义。首先从异质性环境污染排放角度出发,选取了四种环境压力指标,采用非径向的Slacks Based Model（SBM）模型和Sequential Malmquist指数模型,对山西省2003—2016年11个地级市的环境效率和环境生产率的区域差异及其动态演进进行了深入分析,然后采用固定效应模型、差分广义矩估计模型和面板分位数回归模型分析了环境规制对山西环境生产率的影响。研究结果表明：（1）在维持现有技术水平不变的前提下,山西省整体的环境效率仍有25.31%的改进潜力;中部地区的环境效率值高于北部与南部地区,但是三大区域的环境效率值都呈下降趋势。（2）山西省环境生产率平均每年提高14.63%,其中技术效率对环境生产率的增长表现为负效应,而技术进步是环境生产率提高的主要来源。（3）环境规制与环境生产率之间并不存在正向或者负向的线性关系,而是存在显著的“U”型关系;不同分位点上环境规制对环境生产率变动的影响表现出明显的异质性。     

Spatiotemporal trends of PM2.5 and its major chemical components at urban sites in Canada

To evaluate the effectiveness of emission control regulations designed for reducing air pollution, chemically resolved PM_2.5 data have been collected across Canada through the National Air Pollution Surveillance network in the past decade. 24-hr time integrated PM_2.5 collected at seven urban and two rural sites during 2010-2016 were analyzed to characterize geographical and seasonal patterns and associated potential causes. Site-specific seven-year mean gravimetric PM_2.5 mass concentrations ranged from 5.7 to 9.6 µg/m³. Seven-year mean concentrations of SO₄^2?, NO₃^?, NH₄⁺, organic carbon (OC), and elemental carbon (EC) were in the range of 0.68 to 1.6, 0.21 to 1.5, 0.27 to 0.71, 1.1 to 1.9, and 0.37 to 0.71 µg /m³, accounting for 10.8%-18.1%, 3.7%-16.7%, 4.7%-7.4%, 18.4%-21.0%, and 6.4%-10.6%, respectively, of gravimetric PM_2.5 mass. PM_2.5 and its five major chemical components showed higher concentrations in southeastern Canada and lower values in Atlantic Canada, with the seven-year mean ratios between the two regions being on the order of 1.7 for PM_2.5 and 1.8-7.1 for its chemical components. When comparing the concentrations between urban and rural sites within the same region, those of SO₄^2? and NH₄⁺ were comparable, while those of NO₃^?, OC, and EC were around 20%, 40%-50%, and 70%-80%, respectively, higher at urban than rural sites, indicating the regional scale impacts of SO₄^2? and NH₄⁺ and effects of local sources on OC and EC. Monthly variations generally showed summertime peaks for SO₄^2? and wintertime peaks for NO₃^?, but those of NH₄⁺, OC, and EC exhibited different seasonality at different locations.     

不锈钢-铝电极电絮凝处理含铜废水的试验研究

采用不锈钢-铝为电极的电絮凝法对含铜废水进行了处理试验研究,模拟废水铜离子浓度为150 mg/L,以废水中的铜离子浓度和COD去除率为考察指标,在电流密度为15 mA/cm2、极板间距为3 cm、pH值为7、电解时间为120 min的条件下,Cu2+的去除率平均能达到99%以上,COD的去除率亦能达到97%;在此基础上,应用于实际的电路板腐蚀液废水的处理试验,发现Cl-浓度在200 mg/L以上时,对废水先进行相关预处理也能达到较好的处理效果,该研究对进一步探讨Cl-对电絮凝的影响机理有一定的借鉴意义。     

铋-镧复合氧化物的制备与光催化活性

以同时含La(Ⅲ)和B(iⅢ)的双金属配合物BiLa(dtpa)(NO3).3.5H2O为前驱体,通过500℃的热分解制得铋-镧复合氧化物Bi0.775La0.225O1.5,并利用XRD、SEM和UV-Vis漫反射等分析手段研究灼烧时间对样品的结构及光吸收特性的影响。以甲基橙模拟废水的光催化降解为模型,研究不同灼烧时间对铋-镧复合氧化物光催化活性的影响。结果表明,热分解所得铋-镧复合氧化物样品呈疏松多孔结构,对光具有较宽的吸收范围,在紫外光区具有较好的光催化活性,灼烧时间影响样品的粒径和形貌以及光催化效果,在20 mg/L甲基橙溶液中添加灼烧1 h和4 h所得的催化剂样品1 g/L,光照4 h后甲基橙褪色率分别达95%和91%。     

高海拔地区生态可持续发展策略刍论

通过生物多样性调查及参照国内外对该区域的研究资料基础上,充分认识了高海拔地区基本特点及其重要性,系统阐述了目前高海拔地区在生态可持续发展过程中所面临的问题及限制因素,提出全面开展生物多样性调查,确立生态保护优先区,建立保护区网络,加强区域物质、科技、人才等基础建设,建立健全生态保护投入机制,加强立法与监管,实行合理的生态移民政策等区域生态可持续发展策略,为当前和今后我国高海拔地区的区域开发及进一步开展生态领域研究提供参考。     

硬叶空气凤梨对铅的富集特征研究

空气凤梨是一类生长在空气中、不需要土壤的特殊植物,是有效的监测环境变化的指示植物。文章以硬叶空凤为材料,以环境中最典型的污染物—铅对其进行胁迫处理后,发现硬叶空凤对铅具有很强的耐性,而且可对铅进行有效的富集,是一种合适的指示铅污染的植物。扫描电镜和能谱分析表明,不论何种铅浓度处理植物体,硬叶空凤叶表鳞片中都可检测到铅元素的存在,进一步表明叶表鳞片很可能是铅等重金属元素的主要富集结构。另外,硬叶空凤叶表鳞片的3类细胞在富集铅时所起的作用是不同的,最内部的碟状细胞中铅的含量要大于中间的环状细胞,更大于最外部的翼状细胞,暗示铅的迁移是一种代谢性主动吸收过程。     

Impact of mineral components and selected trace metals on ambient PM10 concentrations

PM10 levels of the mineral components Si, Al, Fe, Ca, Mg and some trace metals were measured at three different sites in the urban area of Vienna (Austria). Observed trace metal concentrations varied between less than 0.1 ng m^?3 (Cd) and approximately 200 ng m^?3 (Zn), mineral components showed enhanced concentrations ranging from 0.01 μg m^?3 (Ca) to 16.3 μg m^?3 (Si). The contribution of the respective mineral oxides to PM10 mass concentrations accounted on average for 26.4 ± 16% (n = 1090) of the PM10 mass, with enhanced rates in spring and autumn (monthly averages of up to 40%) and decreased contributions in the cold season (monthly averages below 10%). The atmospheric occurrence of Al, Ti and Sr could be assigned to crustal sources, whereas for the elements Ba, Ca, Fe, Mg, Mn and V an increased contribution of non-crustal origin was observed. PM10 levels of As, Cd, Co, Cr, Cu, Ni, Pb, Sb, Sn and Zn were predominantly derived from man-made emissions. Intersite comparison indicated that urban PM10 mass concentrations and PM10 levels of As, Pb and Zn were predominantly influenced from the transport of aerosols from outside into the city, whereas for the elements Ba, Mg, Ca, Cu and Fe a distinctly increased impact of local emissions was observed. The contribution of these urban emissions to total PM10 concentrations was estimated by calculating the so-called “urban impact”, which was found to be 32.7 ± 18% (n = 392) in the case of PM10 mass concentrations. The investigated elements accounted on average for 31.3 ± 19% (n = 392) of the observed PM10 mass increase. The mean values for the “urban impacts” of individual elements varied between 25.5% (As) and 77.0% (Ba).     

并流旋转床气体出口压降数值分析

气体出口是旋转床的重要组成部分,对旋转床流场与气相压降有着重要的影响。研究并流旋转床结构、构建气体出口物理模型,利用RNG k-ε湍流模型,探索不同气体出口结构对并流旋转床流场的影响。模拟结果表明:具有4个切向气体出口的DCRPB3615型旋转床有利于旋转床内速度分布均匀、降低湍动能,减小气相压降。模拟与实验对比表明,DCRPB3615压降比单一径向出口的CRPB3615型旋转床降低10%左右。