Body fluid analog chlorination: Application to the determination of disinfection byproduct formation kinetics in swimming pool water

Disinfection by-products(DBPs) are formed in swimming pools by the reactions of bather inputs with the disinfectant.Although a wide range of molecules has been identified within DBPs,only few kinetic rates have been reported.This study investigates the kinetics of chlorine consumption,chloroform formation and dichloroacetonitrile formation caused by human releases.Since the flux and main components of human inputs have been determined and formalized through Body Fluid Analogs(BFAs),it is possible to model the DBPs formation kinetics by studying a limited number of precursor molecules.For each parameter the individual contributions of BFA components have been quantified and kinetic rates have been determined,based on reaction mechanisms proposed in the literature.With a molar consumption of 4 mol Cl_2/mol,urea is confirmed as the major chlorine consumer in the BFA because of its high concentration in human releases.The higher reactivity of ammonia is however highlighted.Citric acid is responsible for most of the chloroform produced during BFA chlorination.Chloroform formation is relatively slow with a limiting rate constant determined at 5.50 × 10~(-3) L/mol/sec.L-histidine is the only precursor for dichloroacetonitrile in the BFA.This DBP is rapidly formed and its degradation by hydrolysis and by reaction with hypochlorite shortens its lifetime in the basin.Reaction rates of dichloroacetonitrile formation by L-histidine chlorination have been established based on the latest chlorination mechanisms proposed.Moreover,this study shows that the reactivity toward chlorine differs whether L-histidine is isolated or mixed with BFA components.     

Preparation of solar-enhanced AlZnO@carbon nano-substrates for remediation of textile wastewaters

Photoactive aluminum doped ZnO(AlZnO) was synthesized by sol-gel method.After that,AlZnO photocatalyst was deposited on five carbon-based materials(CBMs) using ultrasonic route followed by solid-state mixing using ball mill.The CBMs used were poly aniline(PANI),carbon nitride(CN),carbon nanotubes(CNT),graphene(G),and carbon nanofibers(CNF).The crystal phases,elemental compositions,morphological,and optical properties of the AlZnO@CBMs composites were investigated.Experimental results revealed that two of AlZnO@CBMs composites exhibited superior bleaching efficiency(100% removal) and photocatalytic stability(three cycles) for 50 μmol/L Methylene Blue(MB) contaminated water after 60 min irradiation in visible light at pH 6.5,0.7% H_2O_2,and 5 g/L inorganic salts.Under optimum conditions,AlZnO@CBMs nanocomposites were employed for the treatment of mixed dyestuffs composed of MB,Methyl Orange(MO),Astrazone Blue FRR(BB 69),and Rhodamine B(RhB) dyes under dark,ultraviolet,visible,and direct sunlight.For mixed dyestuffs,the AlZnO@G achieved the highest dye sorption capacity(60.91 μmol dye stuffs/g) with kinetic rate 8.22 × 10~(-3) min~(-1) in 90 min via multi-layer physisorption(Freundlich isotherm) on graphene sheet.In additions,AlZnO@CN offered the highest photo-kinetic rate(K_(photo)) of～54.1 × 10~(-3) min~(-1)(93.8% after 60 min) under direct sunlight.Furthermore,the selective radical trapping experiment confirmed that the holes and oxidative superoxide radicals are crucial on dyes photodegradation pathway.Owing to their superior performance,AlZnO@G and AlZnO@CN nanocomposites can offer an effective in-situ solar-assisted adsorption/photocatalytic remediation of textile wastewater effluents.     

Utilization of a fumigated sediment by two benthic deposit-feeders:Abra alba (Mollusca: Bivalvia) andEupolymnia nebulosa (Annelida: Polychaeta)

The present study tested the utilization of dead microbial biomass by two benthic deposit-feeders:Abra alba (Wood) (Mollusca: Bivalvia) andEupolymnia nebulosa (Montagu) (Annelida: Polychaeta). Clams were collected in the Canet lagoon during spring 1989. Worms were collected in the Port-Vendres harbour during spring 1989. The¹⁴C-labelled (glutamic acid, 24 h) sediment used during the study was sterilized with 1% chloroform, washed with sterile seawater, and dried (60°C; 48 h). This sterilisation procedure, called fumigation is the least harmful to the sediment (Novitsky 1986). Both clams and worms were incubated in the presence of the fumigated sediment for 5, 10, 20, and 50 h. At the end of each experiment we recorded the radioactivity in four compartments: (1) sediment, (2) dissolved organic matter (DOM), (3) CO₂, and (4) animals. The radioactivity of the sediment was subdivided into five fractions: (i) soluble in 2N HCl, (ii) soluble in hot 5% trichloroacetic acid (TCA), (iii) soluble in 1N NaOH, (iv) soluble in hot 6N HCl, (v) residual (after combustion in a Leco carbon analyser). In the first set of experiments, after 20 h of incubation, 5.4 and 4.7% of the total radioactivity was taken up by clams and worms, respectively. However, a model revealed that this uptake could have been correlated with the release of radiolabelled DOM (33% of total radioactivity during the first 5 h). In order to test this assumption, we used the same protocol with three additional washes of the fumigated sediment. This resulted in a significantly lower uptake by the clams (1.9% of the total radioactivity byt = 50 h), whereas the worms exhibited an uptake similar to that in the initial experiment (5.1% of total radioactivity byt = 50 h). These results underline the importance of considering interactions with DOM when applying radiotracer techniques to the study of benthic food chains. The average ingestion rates of fumigated sediment byA. alba andE. nebulosa were 5.2 10^–2 mg sediment dry wt mg^–1 clam h^–1 and 3.5 10^–2 mg sediment dry wt mg^–1 worm h^–1, respectively, which is comparable to previous data reported for other deposit-feeding bivalves and polychaetes feeding on natural sediment or detritus. The low radioactivity recorded for CO₂ together with the similarity of the changes in the partitioning of the radioactivity within the sediment between control experiments and experiments carried out in the presence of clams or worms suggest low assimilation efficiencies. Therefore, the present study supports the fact that dead microbial biomass does not constitute an important food source for benthic deposit-feeders.     

Application of cryofocusing hydride generation and atomic fluorescence detection for dissolved mercury species determination in natural water samples

The concentration levels of mercury (Hg) species in natural water samples are usually low. Consequently, accurate analysis with low detection limits is still a major problem. In this work, a method was applied for the simultaneous direct determination of dissolved mercury species in water samples by on-line hydride generation (HG), cryogenic trapping (CT), gas chromatography (GC) and detection by atomic fluorescence spectrometry (AFS). The suitability of the method for real samples with different organic matter and chloride contents was evaluated by recovery experiments in synthetic and natural spiked water samples. The HG method was compared with other current available methods for mercury analysis with respect to the different fraction of mercury analysed, i.e. 'reactive', 'reducible' or total. HG derivatization and SnCl2 reduction (with and without previous oxidation with BrCl) were applied to synthetic and natural (spiked and non-spiked) water samples. The influence of chloride and dissolved organic matter concentrations was studied. The results suggest that the HG procedure is suitable for the simultaneous determination of Hg2+ and MeHg+ in surface water samples. Inorganic mercury analysed by HG (i.e. reducible) is close to the total inorganic mercury.     

High frequency monitoring of the coastal marine environment using the MAREL buoy

The MAREL Iroise data buoy provides physico-chemical measurements acquired in surface marine water in continuous and autonomous mode. The water is pumped 1.5 m from below the surface through a sampling pipe and flows through the measuring cell located in the floating structure. Technological innovations implemented inside the measuring cell atop the buoy allow a continuous cleaning of the sensor, while injection of chloride ions into the circuit prevents biological fouling. Specific sensors for temperature, salinity, oxygen and fluorescence investigated in this paper have been evaluated to guarantee measurement precision over a 3 month period. A bi-directional link under Internet TCP-IP protocols is used for data, alarms and remote-control transmissions with the land-based data centre. Herein, we present a 29 month record for 4 parameters measured using a MAREL buoy moored in a coastal environment (Iroise Sea, Brest, France). The accuracy of the data provided by the buoy is assessed by comparison with measurements of sea water weekly sampled at the same site as part of SOMLIT (Service d'Observation du Milieu LIToral), the French network for monitoring of the coastal environment. Some particular events (impact of intensive fresh water discharges, dynamics of a fast phytoplankton bloom) are also presented, demonstrating the worth of monitoring a highly variable environment with a high frequency continuous reliable system.     

One-year monitoring survey of organic compounds (PAHs, PCBs, TBT), heavy metals and biomarkers in blue mussels from the Arcachon Bay, France

Marine mussels Mytilus sp. were transplanted on a monthly basis in cages over one year to oyster farms and harbours in the Arcachon Bay (France) in order to assess the water quality of the bay. Contaminant levels (organotin compounds, trace metals, PCBs and PAHs) were measured in tissues of transplanted mussels and mussels from a reference station, along with physiological parameters of the mussels (condition indexes, lipid content and dry weight). Four biomarkers (AChE: acetylcholinesterase activity, GST: gluthathione S-transferase activity, CAT: catalase activity and TBARS: thiobarbituric acid-reactive substance content) were also monitored. The remote stations monitored (oyster parks) exhibited no accumulation pattern of pollutants. Their respective concentrations therefore constitute a background level of the contamination in the bay ([TBT]= 30 ng Sn g(-1) dw, [SigmaHAPs]= 100 ng g(-1) dw, [SigmaPCBs]= 35 ng g(-1) dw). The elevated chemical contamination of the largest harbour of the bay, the Arcachon harbour, can be interpreted in terms of persistence of organotin compounds ([SigmaOTs]= 1500-2000 ng Sn g(-1) dw) and PAHs ([SigmaHAPs]= 4500-5000 ng g(-1) dw) in sediments and, to a lesser extent, of direct inputs of copper ([Cu]= 20 microg g(-1) dw in harbours versus 7 in oyster parks) and petrogenic PAHs ([methylphenanthrenes]= 1600 ng g(-1) dw in the dockyard versus 170 at the gas stations), related to the use of copper-based antifouling paints and to dockyard activity, respectively. However, the Arcachon Bay presents a low contamination level by PCBs and metals, including harbour stations. Furthermore, higher levels of other PAHs (particularly alkyl PAHs such as methylphenanthrenes/1600 ng g(-1) dw) not included in the 16 PAHs from the EPA priority list (usually studied in biomonitoring programmes/1500 ng g(-1) dw) in the Arcachon harbour underline the need to integrate these compounds in biomonitoring of highly PAH-polluted areas such as harbours in order to avoid misinterpretation of the biological responses observed. Biomarker responses were not able to discriminate the different chemical contamination levels recorded in the Arcachon Bay and rather reflected changes in environmental factors. Furthermore, the strong intraspecies variability of biological responses could be due to genetic differences of mussels from the Arcachon Bay. It is the first time that such an integrated monitoring is performed in the Arcachon Bay, also taking into account seasonal variations of chemical contents and biomarkers levels in mussel tissues.     

Determination of biomass burning emission factors: Methods and results

Biomass burning, in a broad sense, encompasses different burning practices, including open and confined burnings, and different types of vegetation. Emission factors of gaseous or particulate trace compounds are directly dependent both on the fuel type and the combustion process. Emission factors are generally calculated by stoichiometric considerations using the carbon mass balance method, applied either to combustion chamber experiments or to field experiments based on ground-level measurements or aircraft sampling in smoke plumes. There have been a number of experimental studies in the last 10 years to investigate wildfires in tropical, temperate, or boreal regions. This article presents an overview of measurement methods and experimental data on emission factors of reactive or radiatively active trace compounds, including trace gases and particles. It focuses on fires in tropical regions, that is, forest and savanna fires, agricultural burns, charcoal production, use of fuelwood, and charcoal combustion.     

Association between the mollusc bivalve Loripes lucinalis and a Chlamydia-like organism,with comments on its pathogenic impact,life cycle and possible mode of transmission

Loripes lucinalis is a littoral bivalve which has already been confirmed to harbour endo-cellular sulfur-oxidizing bacteria within its gills. Examination of the digestive gland of L. lucinalis collected from the Moulin Blanc Beach in the Bay of Brest (Brittany, France) revealed the existence of an additional association involving a Chlamydia-like organism. Three different forms of Chlamydia-like bacteria were observed: reticulate rod-shaped cells, electron-dense cells and enlarged cells. The reticulate rod-shaped cells and the electron-dense bodies are thought to represent the germinal initial body and infectious form of the bacteria, respectively. The enlarged cells were always associated with what are believed to be spherical or icosahedral phages. Initial infestation seems to occur by phagocytosis at the apical pole of the digestive cells of the tubule and duct epithelia. Within the host cell, the bacteria undergo binary fission and budding, forming an inclusion which gradually fills up the cell. Inclusions are generally between 15 and 30 m in size, and > 85% of all individuals examined possessed inclusion bodies. The level of infestation varied between individuals, some being heavily colonized, but did not seem to be related to season. Histological and ultrastructural observations suggest that, once developed, the colony has three possible fates: (1) the cells will degenerate due to phage infection; (2) colony overcrowding will occur, causing the development of electron-dense bodies that will be released into the lumen; (3) the entire membrane-bound inclusion will be released into the lumen and subsequently into the pallial cavity. Inclusions within the pallial cavity may be ingested by the host or may even be phagocytized by bacteriocyte cells of the gill. It is proposed that this association could be a form of symbiosis and that L. lucinalis may, therefore, be a rare example of an organism adapted to harbour two very different symbioses.     

Removal of naphthenic acid by microwave

The conventional deacidification methods have many disadvantages. In this paper, we reported a new method using microwave irradiation to remove the naphthenic acid from the vacuum cut #1 distillate oil of Daqing. When the distilled oil (the volume rate of solvent-to-oil was 0.23:1) was irradiated for 5 min under constant pressure (0.11 MPa), and then rested for 25 min, the acid number was reduced from 0.63 mg KOH/g to 0.0478 mg KOH/g, which was sufficient to meet the specification of Q/SHR001-95 (less than 0.05 mg KOH/g) on lubricating oil, and the recovery rate of the distilled oil was 99.3%. The microwave irradiation method has many advantages, such as, it is highly effective, it consumes less time and it is environmentally friendly.