Ontogenic variations in fatty acid and alcohol composition of the pelagic amphipod <Emphasis Type="Italic">Themisto libellula</Emphasis> in Kongsfjorden (Svalbard)

The fatty acid and alcohol composition of the pelagic amphipod, Themisto libellula, was monitored during the 5 first months of its life cycle (4–20 mm length) in an Arctic fjord, Kongsfjorden, Svalbard. Fatty acids of the three major lipid classes, polar lipids (PL), triacylglycerol (TAG), and wax esters (WE), were analyzed to highlight ontogenic changes in their diet and metabolism. The PL composition of T. libellula did not show any strong variations along their growth except during the first month where an important increase of 20:5(n-3) (EPA) and 22:6(n-3) (DHA) was observed. The TAG composition revealed a clear gradient corresponding to a diet shift from omnivorous juveniles toward carnivorous sub-adults and adults. Indeed, fatty acid trophic markers of diatoms were dominant in the juveniles, whereas 20:1(n-9) and 22:1(n-11), the Calanus sp. trophic markers, overwhelmed in the older stages. The WE composition highlighted the same general trend, however, differences were found with the TAG and are discussed as a result of differences in turnover rates and assimilation pathways between the two lipid classes.     

Predator-prey spatial game as a tool to understand the effects of protected areas on harvester-wildlife interactions

No-take reserves are sometimes implemented for sustainable population harvesting because they offer opportunities for animals to spatially avoid harvesters, whereas harvesters can benefit in return from the reserve spillover. Here, we used the framework of predator-prey spatial games to understand how protected areas shape spatial interactions between harvesters and target species and determine animal mortality. In these spatial games, the "predator" searches for "prey" and matches their habitat use, unless it meets spatial constraints offering the opportunity for prey to avoid the mortality source. However, such prey refuges could attract predators in the surroundings, which questions the potential benefits for prey. We located, in the Geneva Basin (France), hunting dogs and wild boar Sus scrofa L. during hunting seasons with global positioning systems and very-high-frequency collars. We quantified how the proximity of the reserve shaped the matching between both habitat uses using multivariate analyses and linked these patterns to animals' mortality with a Cox regression analysis. Results showed that habitat uses by both protagonists disassociated only when hunters were spatially constrained by the reserve. In response, hunters increased hunting efforts near the reserve boundary, which induced a higher risk exposure for animals settled over the reserve. The mortality of adult wild boar decreased near the reserve as the mismatch between both habitat uses increased. However the opposite pattern was determined for younger individuals that suffered from the high level of hunting close to the reserve. The predator-prey analogy was an accurate prediction of how the protected area modified spatial relationships between harvesters and target species. Prey-searching strategies adopted by hunters around reserves strongly impacted animal mortality and the efficiency of the protected area for this harvested species. Increasing reserve sizes and/or implementing buffer areas with harvesting limitations can dampen this edge effect and helps harvesters to benefit durably from source populations of reserves. Predator-prey spatial games therefore provide a powerful theoretical background for understanding wildlife-harvester spatial interactions and developing substantial application for sustainable harvesting.     

The thermal hazard evaluation of 1,1-di (tert-butylperoxy) cyclohexane by DSC using non-isothermal and isothermal-kinetic simulations

1,1-Di (tert-butylperoxy) cyclohexane (DTBPH) has been widely employed in the chemical industry. Unfortunately, organic peroxides have been involved in many serious fires and explosions in manufacturing processes, storage, and transportation. This study investigated the thermokinetic parameters by isothermal kinetic and non-isothermal-kinetic simulation, using differential scanning calorimetry (DSC) tests. DSC was applied to assess the kinetic parameters, such as kinetic model, frequency factor (ln k₀), activation energy (E_a), reaction order, and heat of reaction (ΔH_d). Comparisons of non-isothermal and isothermal-kinetic model simulation led to a beneficial kinetic model of thermal decomposition to predict the thermal hazard of DTBPH. Simulations of a 0.5 L Dewar vessel and 25 kg barrel commercial package in liquid thermal explosion models were performed and compared to the results in the literature. From the results, the optimal conditions for use of DTBPH to avoid violent runaway reactions during the storage and transportation were determined. This study established the features of thermal decomposition that could be executed as a reduction of energy potential and storage conditions in view of loss prevention.     

A comparative global assessment of potential negative emissions technologies

The paper summarises a global assessment of around 30 prospective negative emissions techniques (NETs) found in the literature. Fourteen techniques including direct air capture, BECCS, biochar, and ocean alkalinity enhancement are considered in more detail.The novel functional categorisation of NETs developed in the course of the assessment is set out and a comparative quantitative summary of the results is presented, focusing on the relative readiness, global capacity, costs and side-effects of the prospective NETs.Both technology specific and more generic potential limitations are discussed, notably those arising from energy requirements, from availability of geological storage capacity and from sustainable supply of biomass.Conclusions are drawn regarding the overall scope of NETs to contribute to safe carbon budgets, and challenges arising in the future governance of NETs, with particular reference to the potential role of carbon markets.     

Effect of rusting and mechanical damage of gap surfaces on efficiency of flame gaps in flameproof electrical apparatus

Potentially incendiary electrical apparatus for use in the presence of explosive gas atmospheres have to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and gaps in the enclosure wall be designed to prevent a gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that flame gap surfaces have a surface roughness of <6.3 μm. Any damaged flame gap surface has to be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable corrosive and mechanical damage without any reduction of gap performance. In some cases very significant mechanical surface damage in fact improves gap performance. Possible physical reasons for this are discussed. These findings indicate that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be significantly reduced without any increase of explosion risks.     

When solids meet solids: A glimpse into dust mixture explosions

Mixing an inert solid or a less flammable compound with a combustible dust can be regarded as a direct application of the inherent safety principle of moderation. An experimental investigation was carried out to determine the evolution of the ignition sensitivity and the explosion severity of such various mixtures as a function of their compositions. It demonstrates that the introduction of small amounts of highly combustible powders (such as sulphur or nicotinic acid) to a less flammable dust (such as microcrystalline cellulose or carbon black) can strongly influence the ignition sensitivity as well as the explosion severity.It has notably been shown that the ignition sensitivity of solid/solid mixtures significantly rises up when only 10–5%wt. of highly flammable dust is introduced. Simple models can often be applied to estimate the minimum ignition energy, minimum ignition temperature and minimum explosive concentration of such mixtures. Concerning the dust explosivity, three cases have been studied: mixtures of combustibles dusts without reaction, dusts with reactions between the powders, combustible dusts with inert solid. If the evolution of the maximum explosion pressure can be estimated by using thermodynamic calculations, the maximum rate of pressure rise is more difficult to predict with simple models, and both combustion kinetics and hydrodynamics of the dust clouds should be taken into account. These results were also extended to flammable dust/solid inertant mixture. They clearly show that the concentration of solid inertant at which the ignition is not observed anymore could reach 95%wt. As a consequence, the common recommendation of solid inertant introduction up to 50–80%wt. to prevent dust explosion/ignition should be reconsidered.     

Thermal hazard analysis of triacetone triperoxide (TATP) by DSC and GC/MS

Thermal degradation of triacetone triperoxide (TATP) was studied using differential scanning calorimetry (DSC) and gas chromatography/mass spectrometry (GC/MS). TATP, a potential explosive material, is powerful organic peroxide (OP) that can be synthesized by available chemicals, such as acetone and hydrogen peroxide in the laboratory or industries. The thermokinetic parameters, such as exothermic onset temperature (T₀) and heat of decomposition (ΔH_d), were determined by DSC tests. The gas products from thermal degradation of TATP were identified using GC/MS technique.In this study, H₂O₂ was mixed with propanone (acetone) and H₂SO₄ catalysis that produced TATP. The T₀ of TATP was determined to be 40 °C and E_a was calculated to be 65 kJ/mol. A thermal decomposition peak of H₂O₂ was analyzed by DSC and two thermal decomposition peaks of H₂O₂/propanone were determined. Therefore, H₂O₂/propanone mixture was applied to mix acid that was discovered a thermal decomposition peak (as TATP) in this study. According to risk assessment and analysis methodologies, risk assessment of TATP for the environmental and human safety issue was evaluated as 2-level of hazard probability rating (P) and 6-level of severity of consequences ratings (S). Therefore, the result of risk assessment is 12-point and was evaluated as “Undesirable” that should be enforced the effect of control method to reduce the risk.     

Using carbon and nitrogen isotopic values of body feathers to infer inter- and intra-individual variations of seabird feeding ecology during moult

To determine whether stable isotope measurements of body feathers can be used to investigate the isotopic niche of moulting (inter-nesting) adult seabirds, we examined the stable carbon (δ¹³C) and nitrogen (δ¹⁵N) isotopic composition of body feathers of breeding wandering albatrosses (Diomedea exulans) from Crozet Islands, southern Indian Ocean. First we showed that the isotopic composition of body feathers was not significantly different from that of wing feathers, being thus a safe alternative to flight feathers whose collection impairs the birds’ flying ability. Second, we looked at the variances in δ¹³C and δ¹⁵N values resulting from the isotopic measurement of a single feather, four different feathers, and a pool of four feathers per bird, to delineate the best isotopic analytical procedure. A two-step protocol is proposed that allows investigating both the intra- and inter-individual components of the niche width of the species. In a first step, isotopic measurements on a single feather per bird are used to define isotopic specialist from isotopic generalist populations. In a second step and for generalist populations only, measurements on additional (three) feathers per bird are used to delineate type A from type B isotopic generalists (Bearhop et al. in J Anim Ecol 73:1007–1012, 2004). Third, from a biological point of view, our data showed different moulting isotopic niches for adult males and females, and also within female wandering albatrosses. Since the isotopic composition of body feathers in this species reflects that of wing feathers, our results suggest that, after validation, body feathers have the potential for investigating the foraging ecology of other Procellariiforms and seabirds during the poorly known inter-nesting period.     

A system dynamics model for the management of the Manila clam, Ruditapes philippinarum (Adams and Reeve, 1850) in the Bay of Arcachon (France)

The Manila clam Ruditapes philippinarum (Adams and Reeve, 1850) is one of the mollusc species that, driven mainly by the shellfish market industry, has extended throughout the world, far beyond the limits of its original habitat. The Manila clam was introduced into France for aquaculture purposes, between 1972 and 1975. In France, this venerid culture became increasingly widespread and, since 1988, this species has colonised most of the embayments along the French Atlantic coast. In 2004, this development resulted in a fishery of ca. 520 t in Arcachon Bay.     

Quantifying the dynamics of marine invertebrate metacommunities: What processes can maintain high diversity with low densities in the Mediterranean Sea?

The Mediterranean Sea hosts 5.6% of the world benthic invertebrate species on 0.82% of the ocean surface. Mediterranean ecosystems are also characterized by low densities (and biomasses) compared to other oceanic ecosystems, a feature often attributed to their oligotrophic environment. Oligotrophic conditions can induce lower growth rates and higher mortality rates, and a stronger competition for food between individuals. A theoretical model was developed in order to study the diversity vs. density patterns in coastal benthic invertebrate species. This model describes their minimal population dynamics including basic processes (growth, mortality, reproduction and effects of competitive interactions between individuals) and incorporating fluxes of larvae (finally recruited as juveniles) between a mosaic of local habitats. Populations are therefore structured in a metacommunity. The connectivity between local communities is ensured by passive pelagic larval dispersal. In the Mediterranean Sea, because of the microtidal regime, the connectivity between coastal habitats is lower and more variable than in macrotidal basins. Mathematical properties of the model revealed that competitive interactions (intra- and interspecific competitions) have a stabilizing effect on interacting organisms when gains by recruitment are higher than losses by mortality. In addition, low mortality rates and low connectivity which decreases negative local interactions maintains high regional species diversity with low local densities. This property suggested that oligotrophy cannot be the only factor leading to the high diversity–low density pattern observed in the Mediterranean Sea.