Degradation products of profenofos as identified by high-field FTICR mass spectrometry: Isotopic fine structure approach

This study was performed to identify the degradation products of profenofos “a phenyl organothiophosphate insecticide” in raw water (RW) collected from the entry point of Metropolitan Water Works Authority “Bangkaen, Thailand” and ultrapure water (UPW) with and without TiO₂ under simulated sunlight irradiation. Degradation of profenofos was followed with ultrahigh performance liquid chromatography (UHPLC) and follows pseudo first-order kinetic. Accordingly, high-field FTICR mass spectrometry coupled to an electrospray ionization source was used to reveal the degradation routes of profenofos and the isotopic fine structures (IFS) elucidations to approve the chemical structures of its degradation products. More degradation products were detected in UPW as compared to RW. Consequently, two main degradation pathways namely (i) interactive replacements of bromine and hydrogen by hydroxyl functional groups and (ii) rupture of PO, PS, CBr and CCl bonds were observed. None interactive replacement of chlorine by hydroxyl functional group was detected. Accordingly, mechanistical pathways of the main degradation products were established.     

Urban heat island (UHI) influence on secondary pollutant formation in a tropical humid environment

The combined action of urbanization (change in land use) and increase in vehicular emissions intensifies the urban heat island (UHI) effect in many cities in the developed countries. The urban warming (UHI) enhances heat-stress-related diseases and ozone (O₃) levels due to a photochemical reaction. Even though UHI intensity depends on wind speed, wind direction, and solar flux, the thermodynamic properties of surface materials can accelerate the temperature profiles at the local scale. This mechanism modifies the atmospheric boundary layer (ABL) structure and mixing height in urban regions. These changes further deteriorate the local air quality. In this work, an attempt has been made to understand the interrelationship between air pollution and UHI intensity at selected urban areas located at tropical environment. The characteristics of ambient temperature profiles associated with land use changes in the different microenvironments of Chennai city were simulated using the Envi-Met model. The simulated surface 24-hr average air temperatures (11 m above the ground) for urban background and commercial and residential sites were found to be 30.81 ± 2.06, 31.51 ± 1.87, and 31.33 ± 2.1ºC, respectively. The diurnal variation of UHI intensity was determined by comparing the daytime average air temperatures to the diurnal air temperature for different wind velocity conditions. From the model simulations, we found that wind speed of 0.2 to 5 m/sec aggravates the UHI intensity. Further, the diurnal variation of mixing height was also estimated at the study locations. The estimated lowest mixing height at the residential area was found to be 60 m in the middle of night. During the same period, highest ozone (O₃) concentrations were also recorded at the continuous ambient air quality monitoring station (CAAQMS) located at the residential area.

Implications: An attempt has made to study the diurnal variation of secondary pollution levels in different study regions. This paper focuses mainly on the UHI intensity variations with respect to percentage of land use pattern change in Chennai city, India. The study simulated the area-based land use pattern with local mixing height variations. The relationship between UHI intensity and mixing height provides variations on local air quality.     

Ambiguity,reasoned determination,and climate-change policy

This paper examines climate-change benefit-cost analysis in the presence of scientific uncertainty in the form of ambiguity. The specific issue addressed is the robustness of benefit-cost analyses of climate-change policy alternatives to relaxation of Savage's original axioms. Two alternatives to subjective expected utility (SEU) are considered: maximin expected utility (MEU) and incomplete expected utility (IEU). Among other results, it is demonstrated that polar opposite recommendations can emerge in an ambiguous decision setting even if all agree on Society's rate of time preference, Society's risk attitudes, the degree of ambiguity faced, and the scientific primitives. We show that, for a simple numerical simulation of our model, an MEU decision maker favors policies which immediately tackle climate change while an IEU decision prefers “business as usual”.“Each agency shall assess the costs and benefits of the intended regulation, and recognizing that some costs and benefits are difficult to quantify, propose or adopt a regulation only upon a reasoned determination that the benefits of the intended regulation justify its cost.” Executive Order 12866 of the US President.     

Assessing computer waste generation in Chile using material flow analysis

The quantities of e-waste are expected to increase sharply in Chile. The purpose of this paper is to provide a quantitative data basis on generated e-waste quantities. A material flow analysis was carried out assessing the generation of e-waste from computer equipment (desktop and laptop PCs as well as CRT and LCD-monitors). Import and sales data were collected from the Chilean Customs database as well as from publications by the International Data Corporation. A survey was conducted to determine consumers’ choices with respect to storage, re-use and disposal of computer equipment. The generation of e-waste was assessed in a baseline as well as upper and lower scenarios until 2020.The results for the baseline scenario show that about 10,000 and 20,000 tons of computer waste may be generated in the years 2010 and 2020, respectively. The cumulative e-waste generation will be four to five times higher in the upcoming decade (2010–2019) than during the current decade (2000–2009). By 2020, the shares of LCD-monitors and laptops will increase more rapidly replacing other e-waste including the CRT-monitors. The model also shows the principal flows of computer equipment from production and sale to recycling and disposal. The re-use of computer equipment plays an important role in Chile. An appropriate recycling scheme will have to be introduced to provide adequate solutions for the growing rate of e-waste generation.     

Drought frequency in the Volta Basin of West Africa

According to various reports, climate change is responsible for the change in rainfall amount and pattern accompanied by the various degrees of extreme events in Sahelian West Africa in recent years. Other reports also suggest that there has been a “recovery” of the rainy season (Nicholson 2005). In this study, temporal characteristics of meteorological droughts in the Volta basin, a semi-arid region in West Africa, are investigated in order to provide a guide for sustainable water resource management. For this purpose, drought intensity, areal extent and recurrence frequency is analysed using the standardised precipitation index (SPI) for a time series between 1961 and 2005 from 52 meteorology stations across the Volta basin. Using this analysis the severity of the historical droughts of 1961, 1970, 1983, 1992 and 2001 that occurred in the region are assessed and their intensity, areal extent and return periods are obtained. The drought intensity is lower than −2.0 over nearly 75% of the region, meaning that a major part of the region was under extreme drought conditions during this year. The drought of 1983/1984 has a probability of occurrence of up to 0.1 from records spanning 44 years. The areal extent of extreme drought conditions is about 90% during this drought period.     

Environmental chamber test methodology for characterizing organic vapors from solid emission sources

Environmental test chambers are an important tool in the characterization of organic emissions from solid consumer and construction products and in the evaluation of their potential impact on indoor air quality. The results of extensive research concerning formaldehyde (CH₂O) emissions from such products strongly support this application of environmental chambers to measure product emissions and provide useful input for the design of environmental chamber studies. The physical design and test methodology for environmental chambers are strongly influenced by several elements in a comprehensive project plan for source characterization, including the selection process for test samples and the mathematical models used to interpret the organic emissions data. The protocol for environmental chamber testing extends broadly from the acquisition, preparation and conditioning of test specimens, to the selection and control of environmental test conditions, and to the calibration and measurement of system parameters and organic emissions. The requirements for environmental control inside the test chamber can be estimated from the sensitivity of the organic emission rates of the test products (e.g. CH₂O emissions from pressed-wood products) to variation in environmental parameters. The cost of the numerous, multiple-organic analyses required for environmental chamber testing of solid emitters is seen as a strong limitation to product selection strategies and modeling efforts. The modeling of organic emissions from solid emitters can be both a planning tool for development of chamber test methodology and a means to interpret test chamber results.