Performance assessment system of health,safety and environment based on experts' weights and fuzzy comprehensive evaluation

Performance evaluation of Health, Safety and Environment (HSE) is the measurement of a company's achievement in HSE management. In order to receive a comprehensive and objective evaluation result, it is necessary to consider all evaluation factors and experts at different levels when HSE performance assessment is conducted. To improve conventional HSE performance evaluation, where weighted average method was used, a Fuzzy Comprehensive Evaluation (FCE) method is used in this study by taking experts' weights into account. Further, an HSE operating performance assessment system is designed to simplify manual and complex assessment process and generate charts and analysis reports automatically. Finally, a case of petrochemical enterprise is used to illustrate the effectiveness of the method and system.     

Assessing protected area effectiveness using surrounding (buffer) areas environmentally similar to the target area

Many studies are based on the assumption that an area and its surrounding (buffer) area present similar environmental conditions and can be compared. For example, in order to assess the effectiveness of a protected area, the land use/cover changes are compared inside the park with its surroundings. However, the heterogeneity in spatial variables can bias this assessment: we have shown that most of the protected areas in Mexico present significant environmental differences between their interior and their surroundings. Therefore, a comparison that aims at assessing the effectiveness of conservation strategies, must be cautioned. In this paper, a simple method which allows the generation of a buffer area that presents similar conditions with respect to a set of environmental variables is presented. The method was used in order to assess the effectiveness of the Calakmul Biosphere Reserve, a protected area located in the south-eastern part of Mexico. The annual rate of deforestation inside the protected area, the standard buffer area (based upon distance from the protected area only) and the similar buffer area (taking into account distance along with some environmental variables) were 0.3, 1.3 and 0.6%, respectively. These results showed that the protected area was effective in preventing land clearing, but that the comparison with the standard buffer area gave an over-optimistic vision of its effectiveness.     

A modular approach to Integrated Assessment modeling

In this paper, we present a new approach to model coupling that probably forms the methodological basis of a new generation of Integrated Assessment models. This approach respects the knowledge and expertise that is embodied in existing models and encourages their gradual evolution. Modularity is the guiding principle. Our approach is distinguished by the way modules are coupled which is based on an interplay of a job control module, a numerical coupling module, and a couple of stand-alone functional modules. The numerical coupling module - the core component - serves to treat the feedbacks between the functional modules. A first implemented example that couples an economic and a climate module by means of a two-phase meta-optimization is presented here. The algorithm and mathematical structure behind are discussed as well as important features such as convergence behavior and reliability.     

战略环境评价的工作程序

介绍了战略环境评价（法规、政策、计划和规划层次）工作程序的三个环节：评价方案的制定、评价实施和评价总结。并提出了战略环境评价指标体系制定的原则、战略环境评价的具体步骤及战略环境评价报告书的基本内容。     

销毁遗弃化学武器的环境风险评价方法研究

为履行《禁止化学武器公约》，各缔约国销毁化学武器的工作已启动。根据当前世界上化学武器的销毁情况，并针对二战期间在中国遗弃的化学武器的特点，给出了一套适应化学武器销毁流程的环境风险评价方法和技术。这套方法对将在我国进行的销毁遗弃化学武器风险评价工作有一定的实际意义。     

矩阵法在环境影响评价中的应用

以唐山市亚行贷款环保项目的环境影响评价为例，说明应用矩阵法的内容、特点和不足     

战略环境评价及其应用初探

概述了战略环境价的概念、产生原因、研究现状及其工作程序，结合川南矿肥工程项目对它进行了应用初探，提出了计划、规划层次ＳＥＡ的方法和指标，并对我国环评工作提出了建议。     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

环境风险评价中若干问题探讨

社会经济的高速发展,也诱发了新的环境风险可能性的发生,特别是近年来的多种环境风险灾害事故的发生已引起了各国和国际组织的普遍关注。环境风险评价与环境风险管理已成为保护生态环境、维护公众健康的重要内容和制定决策的重要依据。文章结合目前环境风险评价的发展,探讨有关两大类环境风险评价(突发性与非突发性)以及环境风险评价与安全评价的区别,环境风险评价评估标准以及环境风险评价与城市环境管理的一些问题。     

城市环境系统的权重分配

本文将多目标二级决策法用于城市环境系统的权重分配，对城中环境系统各要素及各要素的表征参数进行客观自动赋权，克服了环境质量评价中权重分配的主观随意性。该方法物理意义清晰，算法简便，具有较好的应用价值。