环境升温过程对常温固化环氧树脂热力学性能的影响

目的提高常温固化环氧树脂体系的高温使用性能。方法采用常温固化剂T31、中温固化剂IPDA以及高温固化剂DDM作为混合固化剂,对E-44型和AG-80型混合环氧树脂体系进行常温固化反应,并分析环境升温过程对固化物热力学性能的影响。通过DMA分析、热变形测量、固化度测试,分别评价室温固化环氧树脂在环境升温过程前后的玻璃化转变温度、热变形量及体系内部的固化反应程度变化,并通过吸水率测试和弯曲强度测试对玻璃纤维布增强常温固化环氧树脂基复合材料的耐湿热性能以及高温条件下的力学性能进行分析。结果环氧树脂常温固化物的tg为85.21℃,经1.5℃/min的平均升温速率加热至90℃之后,该环境升温过程使固化物的固化度增大至92%以上,tg增长为132.06℃的同时热变形温度增大。其复合材料耐湿热性能提高,且100℃时弯曲强度的保持率为65%,对于加热至120℃的环境升温过程,固化物的固化度接近96%,tg增长为144.45℃的同时热变形温度进一步提高,其复合材料耐湿热性能改善程度更加明显,且130℃时弯曲强度保持率仍接近60%。结论常温、中温、高温混合固化剂的合理复配有助于环氧树脂体系在环境升温变化的诱导条件下发生梯度式固化反应,使体系内部的交联固化程度迅速升至较高水平,可以有效提高其玻璃化转变温度,显著改善常温固化环氧树脂体系在高温条件下的热力学性能。     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.     

利用pH值梯度研究建筑砂浆的酸蚀程度

在两种不同ｐＨ值模拟酸雨和３种浸泡时间条件下，据ｐＨ值梯度测定了各类保护剂处理建筑砂浆试件的酸化层厚度，从而判定保护剂的保护效果，了解酸蚀程度。并分析了影响酸化层厚度的因素。     

在降雨量极少的条件下日本琵琶湖的环境因子的分布(英文)

琵琶湖是日本第一大淡水湖,20世纪60年代以来,由于经济的发展,湖水水质逐步变坏。1977年湖的北部出现赤潮,1983年湖的南部出现了湖泊富营养化的产物微囊藻。多年来,在深水区湖水温度分层情况下,叶绿素a或浮游植物主要分布在湖的表层(Tezuka,1984)。但在1994年夏季,降雨量极少的情况下,在深水区叶绿素a或浮游植物主要分布在温跃层附近,这种现象在琵琶湖是罕见的(Nakanishi,1995)。最近,琵琶湖北湖的藻类爆发显著增加了溶氧的消耗,导致了湖底层溶氧的减少。如果湖底层溶氧持续减少,底泥储存的磷就会释放到湖水中,从而加快湖泊富营养化的进程。本文分析了琵琶湖南北10个点1994年4月至1995年3月每月1次的常规观测资料,深入剖析了全湖物理化学参数的时空分布,不仅发现叶绿素的峰值在湖水温度分层时出现在温跃层的上部,而且湖底边界层同时出现了低溶氧和高浊度的现象。分析认为绿素a和溶氧、浊度的对应关系表明温跃层是一光合成活跃的区间。     

A reflection on four impactful Ambio papers: The biotic perspective: This article belongs to Ambio’s 50th Anniversary Collection. Theme: Climate change impacts

Climate change represents one of the most pressing societal and scientific challenges of our time. While much of the current research on climate change focuses on future prediction, some of the strongest signals of warming can already be seen in Arctic and alpine areas, where temperatures are rising faster than the global average, and in the oceans, where the combination of rising temperatures and acidification due to increased CO₂ concentrations has had catastrophic consequences for sensitive marine organisms inhabiting coral reefs. The scientific papers highlighted as part of this anniversary issue represent some of the most impactful advances in our understanding of the consequences of anthropogenic climate change. Here, we reflect on the legacy of these papers from the biotic perspective.     

非潮汐淹水对白骨壤膜脂过氧化系统的影响

通过室内模拟非潮汐淹水,探索不同淹水水位条件下,红树植物白骨壤(A.marina(Forsk.)Vierh).超氧化物歧化酶(SOD)、过氧化氢酶(CAT)、丙二醛(MDA)随时间的变化情况。结果表明,经历第二个淹水周期后,较第一个周期各梯度,白骨壤超氧化物歧化酶活性(SOD)从高到低排序不变,过氧化氢酶活性(CAT)、丙二醛的量(MDA)也表现出相同的规律。本研究结论为红树植物在人工非潮汐生境下,红树林造林的关键技术之一——淹水水位的控制提供了数据参考。     

高温(70℃)玉米秸秆水解液产氢行为及群落结构

考察了高温条件下(70℃)牛粪堆肥、土壤、厌氧污泥、腐烂秸秆种接种物利用玉米秸秆水解液的产氢行为。结果表明:牛粪堆肥接种时达到最大的产气量(1355.7mL/L)和氢气产量(608.4mL/L),随后依次为腐烂秸秆、厌氧污泥和土壤。修改的Gompertz方程可以较好描述产氢量随时间变化趋势(R2>0.99)。牛粪堆肥接种时达到最大的产氢潜力(676.0mL/L),而土壤接种时的迟滞时间最小(9.8h)。DGGE图谱显示:不同接种物对应不同的微生物群落结构。Bacillus thermozeamaize,Enterobacter sp.JDM-19和Thermoanaerobacterium polysaccharolyticum strain,KMTHCJT和可能分别是牛粪堆肥,厌氧污泥和腐烂秸秆接种条件下的关键产氢微生物。     

Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.