电解-CASS工艺处理制药废水工艺研究与设计

采用电解 CASS工艺处理制药厂废水 ,实现了处理效率高 ,占地面积小 ,工程投资低等优点 ,处理后各项污染指标均达到国家《污水综合排放》(GB8978— 1996)的二级排放标准     

重金属离子在腐殖酸表面的吸附——类颗粒表面吸附模型

本实验用伏安质子滴定法获得重金属离子(Cu~(2+)、Pb~(2+)、Cd~(2+))在腐殖酸表面吸附的实验数据,并基于这些数据提出重金属离子在腐殖酸表面的络合模型。模型中引入两个实验常数:反应系数α和竞争反应常数K_H。实验结果表明,这两个常数的实验值在一相当宽的起始溶液条件下基本稳定。基于这两个常数而获得的pH相关吸附等温线和实验数据相当符合。模型中采用了由电位滴定得到的腐殖酸表面羧基浓度作为最大表面基团浓度,并对其质子解离常数进行了表面电荷影响的修正。     

常温酸性腐蚀对热障涂层性能的影响

采用酸性盐雾腐蚀试验对物理气相沉积法制备的热障涂层进行了常温腐蚀,研究了常温酸性盐雾腐蚀对热障涂层的微观形貌以及高温性能的影响.试验结果表明：常温酸性腐蚀使热障涂层表面变得粗糙不平,产生了较大的裂纹.经过150次高温循环氧化后,顶层氧化锆晶粒排列疏松,裂纹进一步扩展,中间层--粘结层氧化速度加快,生成了疏松的TGO层.TGO的体积膨胀效应使得陶瓷/粘结层界面结合力降低,缩短了涂层的使用寿命.     

Electrochemical study of sulfide solution in the presence of surfactants

ｌｅｃｔｒｏｃｈｅｍｉｃａｌｓｔｕｄｙｏｆｓｕｌｆｉｄｅｓｏｌｕｔｉｏｎｉｎｔｈｅｐｒｅｓｅｎｃｅｏｆｓｕｒｆａｃｔａｎｔｓＹｉＱｉｎｇｆｅｎｇＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｃａｌＥｎｇｉｎｅｒｉｎｇ，ＸｉａｎｇｔａｎＰｏｌｙｔｅｃｈｎｉｃＵ...     

企业逆向物流与循环经济立法之联系

逆向物流给企业带来效益的同时,也带来了生态物流的理念.逆向物流涉及了经济与生态环境两大系统,显现出了自身的特点与积极因素.逆向物流充分体现了循环经济发展之宗旨.加速循环经济的立法,并以相应立法来推动企业尽快实施物流活动是至关重要的.     

Electrochemical treatment of olive mill wastewater: Treatment extent and effluent phenolic compounds monitoring using some uncommon analytical tools

Problems related with industrials effluents can be divided in two parts: (1) their toxicity associated to their chemical content which should be removed before discharging the wastewater into the receptor media; (2) and the second part is linked to the difficulties of pollution characterisation and monitoring caused by the complexity of these matrixes. This investigation deals with these two aspects, an electrochemical treatment method of an olive mill wastewater (OMW) under platinized expanded titanium electrodes using a modified Grignard reactor for toxicity removal as well as the exploration of the use of some specific analytical tools to monitor effluent phenolic compounds elimination. The results showed that electrochemical oxidation is able to remove/mitigate the OMW pollution. Indeed, 87% of OMW color was removed and all aromatic compounds were disappeared from the solution by anodic oxidation. Moreover, 55% of the chemical oxygen demand (COD) and the total organic carbon (TOC) were reduced. On the other hand, UV- Visible spectrophotometry, Gaz chromatography/mass spectrometry, cyclic voltammetry and 13 C Nuclear Magnetic Resonance (NMR) showed that the used treatment seems efficaciously to eliminate phenolic compounds from OMW. It was concluded that electrochemical oxidation in a modified Grignard reactor is a promising process for the destruction of all phenolic compounds present in OMW. Among the monitoring analytical tools applied, cyclic voltammetry and 13 C NMR are among the techniques that are introduced for the first time to control the advancement of the OMW treatment and gave a close insight on polyphenols disappearance.     

锈蚀钢筋混凝土圆柱抗震性能的试验研究

对不同锈蚀程度的钢筋混凝土圆柱进行低周反复试验,研究了不同轴压比下的钢筋锈蚀率对钢筋混凝土圆柱滞回曲线、骨架曲线、刚度、延性及耗能能力的影响;给出了试件累积耗能、屈服荷栽、极限荷栽、荷栽最大值和位移延性系数与钢筋锈蚀率和轴压比的关系.研究表明,随着钢筋锈蚀率和轴压比的增大,试件的滞回曲线趋于干瘪,骨架曲线下降段变陡,试...     

粉煤灰最大往返剪切作用面上应变破坏标准的应力条件

基于文献[1]提出的最大往返剪切作用面上的液化应力条件和粉煤灰的动三轴试验数据,运用回归分析方法拟合曲线及相关参数建立了粉煤灰的破坏应力条件,并应用F检验法对参数的回归效果进行了检验,检验结果表明参数的回归效果高度显著。得出的破坏应力条件表明初始剪应力与动剪应力的倒数间并不呈线性关系,而是二次多项式关系,这与张克绪所提出的应力条件存在着差异。因此,可初步认为张克绪的液化应力条件不能直接运用于粉煤灰。     

射流曝气周期活性污泥法脱氮除磷研究

针对零星居民点的污水处理,开发了射流曝气周期活性污泥法工艺.它是一种连续进水、周期性间歇曝气的改良型SBR工艺,也是一种时间程序和空间程序相结合的污水处理工艺,具有良好的脱氮除磷效果.试验表明,在水力负荷4 m3/d,曝气周期为每2 h曝气15 min、静置105 min的条件下,出水COD为48.8～53.5 mg/L,去除率达79.4%～80.5%;出水TN为2.81～3.98 mg/L,去除率达82.4%～89.4%;出水NH3-N为0.36～0.78 mg/L,去除率高达96.4%～98.4%;出水TP为0.63～1.18 mg/L,去除率为67.2%～78.9%,均可达到《城镇污水处理厂污染物排放标准》(GB 18918-2002)中的一级B排放标准.     

循环载荷下煤裂隙演化试验研究

为了研究循环载荷下的煤体裂隙演化特征,在不同应力水平和不同频率条件下分别进行煤样破坏力学及声发射试验。结果表明:应力-应变曲线呈疏-密-疏的变化特征,对应的振铃数柱状图呈U型;上限应力点的应变值、累积能量、撞击计数均随循环次数增加而上升,曲线呈倒S型;煤裂隙演化经历了原始裂隙闭合、新生裂隙稳定发育和裂纹贯穿破坏等3个不同阶段;循环载荷的应力水平和加载频率对煤体疲劳寿命的影响具有差异性,对煤体裂隙演化和破坏模式均有明显影响。