One-step estimation method and nomogram to predict safety distances of pressurized gas pipelines from blast sources

Pressurized gas pipelines may be endangered by accidental or intentional activities causing excess ground vibrations leading to failure. Thus, many papers have been published on this issue, yet most of these efforts suffer from complexity and inability to ascertain that all engaged factors are taken into account. These factors are attributed, namely, to explosion source, explosion-ground interaction, energy transfer through the ground, ground-pipeline interaction, and response of the pipeline. The deterministic method developed previously by the author has derived useful prediction mathematical formulas that can be used to calculate, either the stand-off distance of purposefully used explosives, or the maximum quantity of explosives to be used at a given distance, or the equivalent stress of a pipeline induced by an explosive charge at a given standoff distance. The method can also be applied to accidental blast events in factories or other activities. Yet, the complex formulas developed are hard to be used in the field and a simpler approach is needed to facilitate and accelerate in-field estimations. Thus, a nomogram was prepared to make the safety estimations easy and fast and taking into account all engaged critical factors starting from the explosion source through the integrity of the structure.     

Injury severity analysis of rollover crashes for passenger cars and light trucks considering temporal stability: A random parameters logit approach with heterogeneity in mean and variance

Problem: The rollover crash is a serious crash type that often causes higher injury severities. Moreover, factors that contribute to the injury severities of rollover crashes may show instabilities in different vehicle types and time periods, which requires further investigations. This study utilizes the rollover crash data in North Carolina from Highway Safety Information System (HSIS) to study the effect instabilities of factors in vehicle type and time periods in rollover crashes. Methods: The injury severities of drivers are estimated using the random parameters logit (RPL) model with heterogeneity in means and variances. Available factors in HSIS have been categorized into three groups, which are drivers, road, and environment, respectively. This study also justifies the segmentations through transferability tests. The effects of identified significant factors are evaluated using marginal effects. Results: Factors such as FWP (farm, wood, and pasture areas), unhealthy physical condition, impaired physical condition, road adverse, and so forth have shown instabilities in marginal effects among vehicle types and time periods. Practical Applications: The finding of this research could provide important references for policy makers and automobile manufactures to help mitigate the injury severity of rollover crashes.     

The acceptance of personal protective equipment among Hong Kong construction workers: An integration of technology acceptance model and theory of planned behavior with risk perception and safety climate

Introduction: The phenomenon that construction workers do not use personal protective equipment (PPE) is a major reason for the high occurrence frequency of accidents in the construction industry. However, little efforts have been made to quantitatively examine the factors influencing construction workers’ acceptance of PPE. Method: In the current study, a PPE acceptance model for construction workers (PAMCW) was proposed to address the noted need. The PAMCW incorporates the technology acceptance model, theory of planned behavior, risk perception, and safety climate for explaining construction worker acceptance of PPE. 413 construction workers participated in this study to fill out a structured questionnaire. The PAMCW was analyzed using structural equation modeling. Results: Results provide evidence of the applicability of the technology acceptance model and theory of planned behavior to the PPE acceptance among construction workers. The positive influence of safety climate and risk perception-severity on attitude toward using PPE was significant. Safety climate positively influences perceived usefulness. Risk perception-worry and unsafe was found to positively affect intention to use PPE. Practical Applications: Practical suggestions for increasing construction workers’ use of PPE are also discussed.     

Evaluation of driver performance with a prototype cyber physical mid-block crossing advanced warning system

Introduction: Using connected vehicle technologies, pedestrian to vehicle (P2V) communication applications can be installed on smart devices allowing pedestrians to communicate with drivers by broadcasting discrete safety messages, received by drivers in-vehicle, as an alternative to expensive fixed-location physical safety infrastructure. Method: This study consists of designing, developing, and deploying an entirely cyber-physical P2V communication system within the cellular vehicle to everything (C-V2X) environment at a mid-block crosswalk to analyze drivers’ reactions to in-vehicle advanced warning messages, the impacts of the advanced warning messages on driver awareness, and drivers’ acceptance of this technology. Results: In testing human subjects with, and without, advanced warning messages upon approaching a mid-block crosswalk, driver reaction, acceptance, speed, eye tracking data, and demographic data were collected. Through an odds ratio comparison, it was found that drivers were at least 2.44 times more likely to stop for the pedestrian with the warning than without during the day, and at least 1.79 times more likely during the night. Furthermore, through binary logistic regression analysis, it was found that driver age, time of the day, and the presence of the advanced warning message all had strong, significant impacts with a confidence value of at least 98% (p < 0.02) on the rate at which drivers stopped for the pedestrian. Conclusions: The results from this study indicate that the advanced warning message sent within the C-V2X had a strong, positive impact on driver behavior and understanding of pedestrian intent. Practical Applications: Pedestrian crashes and fatality rates at mid-block crossings continue to increase over the years. Connected vehicle technology utilizing smart devices can be used as a means for communications between pedestrians and drivers to deliver safety messages. State and local city planners should consider geofencing designated mid-block crossings at which this technology operates to increase pedestrian safety and driver awareness.     

Insight into the safety distance of ground and underground installations in typical petrochemical plants

Petrochemical plants are continuously turning into large-size corporations, the installations of facilities show a developing trend from ground to underground because of the difference in land using rate. In this regard, the safety distance of petrochemical equipment buried in both ground and underground cases were investigated based on risk assessment. As a case study, gasoline tank and LPG tank set on the ground and underground are singled out to compare the risks involved. The research showed that the setting case of installation had a great influence on safety distance. Two cases have 80% reduction of equivalent safety distance compared with the rest of the cases. It was found that when the gasoline storage tank was placed underground alone, the PLL value decreased by 36.7%. Only LPG tank was placed underground, and the PLL decreased by 6.33%, and the gasoline and LPG storage tanks were placed underground simultaneously, the PLL value declined by 42.3%. Thus, the layout of plants could be further optimized, which can greatly improve the performances of land use efficiency and safety. In addition, this paper, the selection of embedding methods and the sensitivity of underground case to overpressure was resumed from two aspects: soil properties and burial depth. For the soil properties, it was found that the water saturated sandy soil with high air content and the low density unsaturated sandy soil had better effects on weakening overpressure. Such properties are particularly beneficial to reducing the occurrence rate of accidents. In terms of burial depth, it can be observed that as the burial depth was changed from 0.5m to 1.1m, the value of overpressure has dropped dramatically. When the burial depth was 2m, the damage to personnel and buildings has been greatly reduced beyond 2m from the explosion center.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

Maximizing Returns from Payments for Water‐Based Ecosystem Services: Incorporating Externality Effects of Land Management

Given the expansion of payments for water‐based ecosystem services (PWES) worldwide, two relevant issues are as follows: (1) determination of efficient allocations of payments among land managers, and (2) how this might change when paying one manager to implement a best management practice (BMP) to enhance an ecosystem service impacts the cost‐effectiveness of BMPs considered by other land managers not currently involved in PWES. Such externalities may be negative if diminishing returns dominate, or positive if mechanisms such as “social diffusion” dominate. We analyze how a planner should optimally allocate payments, depending on whether the expected externalities are negligible, negative, or positive. We employ (1) an optimal control model to gain insights on the problem’s dynamics, and (2) stochastic dynamic programming to determine optimal funding strategies using a specific application. The study contributes to the literature by identifying dynamically optimal PWES payment patterns, and illustrates how they should change when one accounts for externalities induced by the program. Because such impacts have not been addressed previously in a rigorous way, this treatment provides useful value added for PWES design and implementation.     

A review on different pipeline fault detection methods

Pipeline faults like leakage and blockage always create problem for engineers. Detection of exact fault quantity and its location is necessary for smooth functioning of a plant or industry and safety of the environment. In this paper brief discussion is made on various pipeline fault detection methods viz. Vibration analysis, Pulse echo methodology, Acoustic techniques, Negative pressure wave based leak detection system, Support Vector Machine (SVM) based pipeline leakage detection, Interferometric fibre sensor based leak detection, Filter Diagonalization Method (FDM), etc. In this paper merit and demerits of all methods are discussed. It is found that these methods have been applied for specific fluids like oil, gas and water, for different layout patterns like straight and zigzag, for various lengths of pipeline like short and long and also depending on various operating conditions. Therefore, a comparison among all methods has been done based on their applicability. Among all fault detection methods, Acoustic reflectometry is found most suitable because of its proficiency to identify blockages and leakage in pipe as small as 1% of its diameter. Moreover this method is economical and applicable for straight, zigzag and long, short length pipes for low, medium and high density fluid.     

论"水十条"对中国水体污染防治的意义

2015年4月16日,国务院正式发布《水污染防治行动计划》,《水污染防治行动计划》为了与一年前出台的"大气十条"相对应,故亦简称"水十条".这将是今后很长一段时期中国治理水环境的纲领性文件."水十条"对中国水污染治理工作提出了总体目标,同时作为新环保法的延伸,"水十条"将强调市场机制在治理水体污染中的作用、促进环境需求的多样化.总的来说,"水十条"的发布,标志着中国将对水污染防控治理进行强力监管,铁腕治污将进入"新常态".     

Sustainability and education for sustainability: An analysis of publications from the last decade

This study analyzes the characteristics of publications on sustainability topics and education for sustainability in the Web of Science (WOS) database during the period ranging from 2005 to 2014. We identified the topics that are being studied within those subjects and other relevant topics. We also analyzed a special edition of the Journal of Cleaner Production on “Higher Education for Sustainable Development: Emerging areas,” published in January, 2014. Our approach was both qualitative and quantitative and aimed at qualifying and quantifying certain variables related to the scientific literature on the broad subject of sustainability. The number of published pieces in the WOS focusing on sustainability issues during the period from 2005 to 2014 was 5,924. In our analysis of the special edition of the Journal of Cleaner Production, we found and analyzed 17 abstracts and full papers. The main results of our survey highlight the education, educational research, environmental sciences, ecology, and engineering areas as including the greatest number of publications. Articles, as opposed to conference proceedings or reviews, accounted for 63% of the published documents, and the year 2013 showed the largest number of publications. Huisingh, Suciu, Katane, and Barth are the most published authors on these topics. Furthermore, management, environmental studies, ecology, and environmental sciences are the “hot topics” with the best search results, meaning articles of impact and high quality. Finally, it should be emphasized that publications on the subject of sustainability appear most often in the sciences.