Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Acute and chronic toxic effects of Pb2+ on polychaete Perinereis aibuhitensis：Morphological changes and responses of the antioxidant system

Perinereis aibuhitensis was used to assess adverse biological effects caused by acute and chronic Pb2＋exposure in artificial seawater under controlled laboratory conditions. In 96-hr acute toxicity experiments,the morphological changes showed a positive time/dose-dependent tendency,and the 96-hr LC50 value of Pb2＋was 686.41 mg/L. The responses of enzymatic and non-enzymatic antioxidants in tissues including catalase（CAT）,peroxidase（POD）,superoxide dismutase（SOD）,glutathione peroxidase（GSH-PX）,malondialdehyde（MDA） and the content of total soluble protein（TSP）,were investigated on days 1,4,7 and 10 after Pb2＋exposure under chronic toxicity testing. Results showed that the activation of the antioxidant system in P. aibuhitensis depended on the Pb2＋concentration and the duration of exposure time.Specifically,POD and SOD activities were induced on the first day of the exposure and decreased to the control level on day 10 after exposure. Therefore,these two indexes could be used to indicate oxidative stress associated with P. aibuhitensis exposure to Pb2＋.     

FBC-DPF在柴油机颗粒物控制中的应用研究

目前针对加装FBC-DPF(燃油添加剂-柴油机颗粒捕集器)后的柴油机放特性研究较少,并且缺乏FBC-DPF对颗粒物中PAHs排放量的影响效果研究.为全面评估加装FBC-DPF后柴油机颗粒物排放特性和FBC-DPF对柴油机尾气中的颗粒物排放污染控制效果,在发动机台架上对装有FBC-DPF的重型柴油机进行了颗粒物排放特性试验.利用电子低压撞击仪(ELPI)测量加装FBC-DPF前、后柴油机颗粒物的数浓度与粒径分布,用玻璃纤维滤膜采集加装FBC-DPF前、后尾气中的固相PAHs,利用色谱质谱联用仪对加装FBC-DPF前、后尾气中的固相PAHs进行定量分析.结果表明:①加装FBC-DPF后柴油机排放的颗粒物数浓度大幅降低,FBC-DPF对尾气中颗粒物的捕集效率平均值在95%左右;②加装FBC-DPF后柴油机固相PAHs总比排放量有所降低,在大负荷区域降幅在25.0%～88.0%之间;③加装FBC-DPF前的颗粒物中位直径为30～89 nm,而加装FBC-DPF后的颗粒物中位直径为41～98 nm,平均增幅为38.2%.对于国Ⅳ及未来国Ⅴ柴油机排放法规,FBC-DPF是解决柴油机颗粒物排放的有效手段;此外,FBC-DPF可以大幅降低柴油机尾气中的有毒成分,并且能够适应高含硫量的燃油环境.     

利用微型后生动物进行污泥原位减量的试验研究

在A/A/O普通活性污泥工艺中引入非寡毛类微型后生动物考察其生长条件和对剩余污泥的减量效果及对系统处理效果的影响。结果表明,当进水负荷小于0.5 mg(/mg MLSS·d)时,非寡毛类微型后生动物可大量生长;当内回流比升高、外回流比降低时,更有利于虫体的繁殖。经过适时的运行工艺调整可使生化系统虫体密度和稳定性提高,污泥减量效果可达到40%以上。非寡毛类后生动物的活动与摄食作用提高了系统污泥的沉降性能,并对系统出水COD、NH3-N、TN、TP、SS没有影响。。     

湿式静电除尘技术研究及应用

燃煤烟气细颗粒物排放的高效控制是控制雾霾天气的重要手段之一,为此国家颁布了世界上最严格的标准之一:《火电厂大气污染物排放标准》(GB13223-2011),要求火电厂粉尘排放浓度低于30 mg/m3,重点地区低于20 mg/m3。干式静电除尘器由于反电晕和二次扬尘等问题,对亚微米级颗粒物脱除效率较低,难以完全满足新标准的要求。湿式静电除尘技术(WESP)通过水膜清灰方式代替振打清灰,可有效控制湿法脱硫塔后细颗粒物的排放,实现燃煤烟气细颗粒物的深度脱除。该文详细阐述了湿式静电除尘器在粉尘脱除效率、材料润湿、抗腐蚀特性及多种污染物协同脱除等方面的最新研究进展,重点介绍了湿式静电除尘技术在燃煤电厂中的应用现状,并在此基础上对我国湿式静电除尘技术的发展做了总结和展望。     

采用精密度法评定总氮测量不确定度

采用top-down技术中的精密度法对环境水样中总氮的测量不确定度进行了评定。文章利用实验室内期间精密度实验结果、参加能力验证结果和实验室内标准样品的重复性测定结果,对实验室测量偏倚和精密度控制情况进行评估,并在保证实验室的测量过程处于统计受控状态下,参考能力验证的室间标准差作为测量不确定度的估计值。由于这种方法关注实验的整个过程,因此更能从整体上反映实验结果的测量不确定度;并且由于省去了传统bottom-up技术中复杂的实验设计和繁琐的合成计算,应用起来简便易行。     

催化臭氧氧化降解水溶液中亚甲基蓝的动力学研究

以废啤酒酵母为原材料、采用吸附-活化法制备得到负载过渡金属铁的活性炭(Fe/AC),对Fe/AC吸附亚甲基蓝(MB)性能和催化臭氧氧化MB效果进行了评价。Fe/AC对MB的吸附符合Langmuir等温吸附模型;20℃,pH=7的条件下,Fe/AC对MB的最大吸附量达到107.43 mg/g。吸附MB达到平衡的Fe/AC催化臭氧氧化降解水中MB,30 min内MB的转化率达到99%以上,5 h后总有机碳(TOC)的降解率达到70%。结合Fe/AC吸附MB特性和催化臭氧氧化MB行为,将Langmuir等温吸附模型分别与近似一级和二级反应动力学模型进行耦合,构建了Langmuir-Kinetic近似一级和近似二级耦合模型,均能较好地拟合MB转化率的动力学数据,但对体系的TOC去除率动力学数据的拟合度较低。     

MIL-101(Cr~(3+))可见光催化氧化降解甲基橙的研究

以金属有机多孔材料MIL-101(Cr3+)为非均相催化剂,过硫酸钠(Na2S2O8)为类Fenton体系的氧化剂,在可见光(300 W)下对甲基橙进行催化氧化降解研究。结果表明,MIL-101(Cr3+)在反应时间为120 min时对甲基橙降解率高达91.0%,且回收利用3次后仍表现出优异的降解性能(降解率达到81.0%)。同样条件下,把MIL-101(Cr3+)替换为TiO2或者不添加任何催化剂,甲基橙的降解率分别为25.6%和8.8%。采用紫外-可见漫反射光谱考察了常温下MIL-101(Cr3+)的禁带宽度大小,进一步证明其优异的光催化降解性能;同时还探讨了MIL-101(Cr3+)催化降解甲基橙的可能机理。     

基于熵值法新疆循环经济发展综合评价分析

根据循环经济理论,针对新疆循环经济的发展,从资源可承载能力、环境发展、社会经济发展三个方面考虑建立新疆循环经济发展的综合评价指标体系,运用熵值法对新疆10年循环经济的发展水平进行综合评价,进而提出了相应的措施,包括完善法律法规体系、加快产业结构调整、加大政策鼓励力度、促进产业集聚等。