石墨炉原子吸收法测定自来水中总铬升温参数的探讨

对石墨炉原子吸收测定自来水中总铬的方法进行优化。通过对石墨炉升温程序条件进行优化,找出其最佳参数值,其方法的线性关系良好,相关系数为0.999以上,回收率在96.7%~99.5%之间。该法操作简便,灵敏度和准确度高,线性好,便于推广,适合自来水中总铬的测定。     

Microbiological parameters and maturity degree during composting of Posidonia oceanica residues mixed with vegetable wastes in semi-arid pedo-climatic condition

The aim of this study was to characterize the biological stability and maturity degree of compost during a controlled pile-composting trial of mixed vegetable residues (VR) collected from markets of Tunis City with residues of Posidonia oceanica (PoR), collected from Tunis beaches. The accumulation in beaches (as well as their removal) constitutes a serious environmental problem in all Mediterranean countries particularly in Tunisia. Aerobic-thermophilic composting is the most reasonable way to profit highly-valuable content of organic matter in these wastes for agricultural purposes. The physical, chemical, and biological parameters were monitored during composting over 150 d. The most appropriate parameters were selected to establish the maturity degree. The main result of this research was the deduction of the following maturity criterion: (a) C/N ratio < 15; (b) NH₄⁺-N < 400 mg/kg; (c) CO₂-C < 2000 mg CO₂-C/kg; (d) dehydrogenase activity < 1 mg TPF/g dry matter; (e) germination index (GI) > 80%. These five parameters, considered jointly are indicative of a high maturity degree and thus of a high-quality organic amendment which employed in a rational way, may improve soil fertility and soil quality. The mature compost was relatively rich in N (13.0 g/kg), P (4.74 g/kg) and MgO (15.80 g/kg). Thus composting definitively constitutes the most optimal option to exploit these wastes.     

Effects of sterilization treatments on the analysis of TOC in water samples

Decomposition experiments conducted with and without microbial processes are commonly used to study the effects of environmental microorganisms on the degradation of organic pollutants.However,the effects of biological pretreatment (sterilization) on organic matter often have a negative impact on such experiments.Based on the principle of water total organic carbon (TOC) analysis,the effects of physical sterilization treatments on determination of TOC and other water quality parameters were investigated.The results revealed that two conventional physical sterilization treatments,autoclaving and 60 Co γ-radiation sterilization,led to the direct decomposition of some organic pollutants,resulting in remarkable errors in the analysis of TOC in water samples.Furthermore,the extent of the errors varied with the intensity and the duration of sterilization treatments.Accordingly,a novel sterilization method for water samples,0.45 μm micro-filtration coupled with ultraviolet radiation (MCUR),was developed in the present study.The results indicated that the MCUR method was capable of exerting a high bactericidal effect on the water sample while significantly decreasing the negative impact on the analysis of TOC and other water quality parameters.Before and after sterilization treatments,the relative errors of TOC determination could be controlled to lower than 3% for water samples with different categories and concentrations of organic pollutants by using MCUR.     

基于仿真的新建污水处理厂工艺参数调试

基于ASM2D模型建立了上海某新建污水厂倒置AAO流程的数学模型,并采用该厂进、出水设计数据对模型进行校正,其中,ASM2D各组分浓度分布参考文献值.同时,通过仿真计算研究了不同温度下进水流量、污泥回流比、混合液回流比及进水流量分配比对出水总化学需氧量（TCOD）、氨氮（SNH3）、总氮（TN）、总磷（TP）及总悬浮颗粒物（TSS）的影响.结果表明,研究获得的定性和定量两方面结果可供该厂在工艺参数调试中作参考.计算机仿真技术在新建污水厂工艺参数调试中的应用可以减少调试时间,降低调试费用,取得良好的经济效益与环境效益.     

α-HCH在太湖地区环境中的长期迁移与残留的动态模拟

根据太湖地区1/4°×1/6°经纬度网格的地表特征及α-HCH施用量,建立了一个基于同精度网格系统, 包含迁移和传输2个模块的质量平衡模型. 迁移模块使用逸度方法描述α-HCH在每一个网格的多介质环境中的迁移过程,传输模块使用拉格朗日方法描述α-HCH在不同网格间的大气平流和水体径流. 模型模拟了α-HCH在研究区域开始施用至今(1952~2007年) α-HCH在5类4层土壤、气、水和底泥23个环境相中的积累、迁移和残留情况. 模拟值与实测α-HCH浓度对比验证表明两者吻合得很好. 环境温度是影响α-HCH在各环境介质中浓度的最重要因素. 模拟结果表明,在α-HCH使用时期,在土壤中的年积累趋势约为年使用量趋势的5.7%; 在停止使用后,其减少趋势为积累趋势的50%. 在α-HCH使用期间,太湖流域α-HCH的年使用量与其水-气界面沉积通量存在显著的相关性,而与土-气界面通量则无显著相关性. α-HCH停止使用后,太湖流域水-气界面通量表现为向大气的挥发,且自1985年其年挥发通量大于土-气挥发通量. 底泥是α-HCH水-气界面挥发的主要补给源. 2007年太湖流域内α-HCH大气浓度普遍高于流域外大气浓度. 整个模拟时段α-HCH的主要输出途径是流出太湖地区,且以大气平流为主;其次的减少途径是在环境介质中的降解,其中土壤降解量占绝大部分. 2007年环境中残留的α-HCH为总使用量的0.005%,以土壤残留量为主,其次是底泥.     

电磁混响室的理论设计与场均匀性仿真

总结了混响室腔室和搅拌器的设计准则,并依此完成了最低可用频率为400MHz的混响室腔室和搅拌器的设计。利用FEKO软件对混响室建模,进行场均匀性仿真,计算工作区8个位置的电场,得到场标准偏差。仿真结果表明,设计的混响室性能完全符合标准IEC61000-4-21的规定,电场均匀性小于3dB。     

雷达电磁环境的联合建模与仿真

随着雷达灵敏度、精度的提高,对电磁环境的依赖性也越来越大.首先分析了美军的联合建模与仿真系统(JMASS),指出建立一个综合的、可重用的雷达电磁仿真环境是电子战仿真的关键;重点研究了基于球不变随机过程(SIRP)的K分布杂波模型,以及地面/海面的多路径效应模型;最后建立了雷达电磁环境的模型并进行了仿真.     

基于Anylogic的某高铁客运站人群疏散设施优化研究

高铁客运站突发事件下人员疏散具有不确定性、复杂性等特点,为研究疏散设施如何优化才能满足人员疏散要求,本文基于某高铁站客流路线图绘制高铁站人流疏散模型,利用Anylogic仿真软件进行疏散时间与疏散人数、楼梯宽度、闸机数量关系的模拟研究,并且对疏散出口区域的人流密度和人流量进行统计分析.结果表明:随着楼梯宽度的增加,总疏散时间会逐渐减小,但当楼梯宽度增加到一定程度时,总疏散时间反而会增大然后趋于稳定;随着闸机台数的增加,总疏散时间刚开始减小,后逐渐趋于稳定;分散设置疏散出口,适当控制闸机与闸机之间的距离,可避免闸机出口处人流密度过高.最后根据模拟结果,给出不同状态下人员疏散设施优化的合理建议,疏散设施的优化在一定程度上可以避免出现人员拥挤踩踏的群死群伤事故.     

基于OPMSE与BAT的啤酒行业排放限值仿真

以OPMSE仿真计算啤酒行业排放污水中COD,BOD,NH3-N质量浓度为研究对象,查询及调研清河流域典型啤酒行业产生污水中COD,BOD,NH3-N质量浓度范围,经BAT处理后通过OPMSE的仿真计算,得出排放污水中污染物质量浓度正态分布置信区间、最佳出水及最差出水质量浓度。结果表明:置信水平为99%时,COD,BOD,NH3-N的置信区间分别为(75.83,95.95),(19.30,25.88),(5.68,6.85);最佳出水质量浓度分别为4.14 mg/L,5.36 mg/L,2.71 mg/L;最差出水质量浓度分别为20.64 mg/L,20.70 mg/L,10.86mg/L。将仿真结果与现有排放标准对比,拟定啤酒行业的污染物直接排放限值为COD=100 mg/L,BOD=30mg/L,NH3-N=8 mg/L;间接排放限值为COD=400 mg/L,BOD=80 mg/L,NH3-N=25 mg/L。