高中速过滤器的选择

介绍了高中速过滤器的应用环境、工作原理和结构组成,并从结构组成及工艺环境和实际应用性价比方面,提出实际工作时选择高中速过滤器的注意事项。     

Efficacy of two chemical coagulants and three different filtration media on removal of Aspergillus flavus from surface water

Aquatic fungi are common in various aqueous environments and play potentially crucial roles in nutrient and carbon cycling as well as interacting with other organisms. Species of Aspergillus are the most common fungi that occur in water. The present study was undertaken to elucidate the efficacy of two coagulants, aluminum sulfate and ferric chloride, used at different concentrations to treat drinking water, in removing Aspergillusflavus, as well as testing three different filtration media： sand, activated carbon, and ceramic granules, for their removal of fungi from water. The results revealed that both coagulants were effective in removing fungi and decreasing the turbidity of drinking water, and turbidity decreased with increasing coagulant concentration. Also, at the highest concentration of the coagulants, A. flavus was decreased by 99.6% in the treated water. Among ceramic granules, activated carbon, and sand used as media for water filtration, the sand and activated carbon filters were more effective in removing A.flavus than ceramic granules while simultaneously decreasing the turbidity levels in the test water samples. Post-treatment total organic carbon （TOC） and total nitrogen （TN） concentrations in the experimental water did not decrease; on the contrary, TN concentrations increased with the increasing dosage of coagulants. The filtration process had no effect in reducing TOC and TN in tested water.     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst

The alteration and formation of toxic compounds and potential changes in the toxicity of emissions when using after-treatment technologies have gained wide attention. Volatile organic compound（VOC）, carbonyl compound and particle-phase polycyclic aromatic hydrocarbon（PAH） emissions were tested at European Steady State Cycle（ESC） to study unregulated emissions from a diesel engine with a fuel-borne catalyst and diesel particulate filter（FBC–DPF）. An Fe-based fuel-borne catalyst was used for this study. According to the results, brake specific emissions of total VOCs without and with DPF were 4.7 and4.9 mg/kWh, respectively, showing a 4.3% increase. Benzene and n-undecane emissions increased and toluene emission decreased, while other individual VOC emissions basically had no change. When retrofitted with the FBC–DPF, total carbonyl compound emission decreased 15.7%, from 25.8 to 21.8 mg/kWh. The two highest carbonyls, formaldehyde and acetaldehyde, were reduced from 20.0 and 3.7 to 16.5 and 3.3 mg/kWh respectively. The specific reactivity（SR） with DPF was reduced from 6.68 to 6.64 mg/kWh. Total particle-phase PAH emissions decreased 66.4% with DPF compared to that without DPF. However, the Benzo[a]pyrene equivalent（BaPeq） with DPF had increased from 0.016 to 0.030 mg/kWh.Fluoranthene and Pyrene had the greatest decrease, 91.1% and 88.4% respectively. The increase of two- and three-ring PAHs with DPF indicates that the fuel-borne catalyst caused some gas-phase PAHs to adsorb on particles. The results of this study expand the knowledge of the effects of using a particulate filter and a Fe-based fuel-borne catalyst on diesel engine unregulated emissions.     

静置/好氧/缺氧序批式反应器（SBR）脱氮除磷效果研究

以静置段代替传统厌氧段,采用后置缺氧方式,考察了静置/好氧/缺氧序批式反应器(SBR)(R1)的生物脱氮除磷(BNR)性能,并与传统厌氧/好氧/缺氧序批式反应器(SBR)(R2)进行对比.两反应器进水乙酸钠、氨氮(NH+4-N)及磷酸盐(PO3-4-P)浓度均分别为350 mg·L-1(以COD计)、40 mg·L-1及12 mg·L-1,水力停留时间(HRT)为12 h.研究结果表明,R1长期运行中磷的去除率与R2相当,分别为92.4%和92.1%,而总氮(TN)去除率则较R2高,分别为83.5%和77.0%.R1静置段省去搅拌但仍能起到厌氧段的作用,为好氧快速摄磷奠定了基础,同时R1缺氧段发生反硝化摄磷,使出水磷降至0.91 mg·L-1.好氧段内R1发生了同步硝化-反硝化(SND),贡献了18.0%的TN去除量,R2也存在SND,但脱氮贡献率较少,仅为9.8%.R1和R2后置缺氧反硝化均以糖原驱动,反硝化速率分别为0.98、0.84 mg·g-1·h-1(以每g VSS产生的N(mg)计),出水TN分别为6.62、9.21 mg·L-1.研究表明,静置段代替传统厌氧段后,可获得更好的脱氮效果,且工艺更为简化.     

双滤料过滤技术在微粒径采出水处理中的研究与应用

对BQ油田联合站采出水处理工艺技术优化,由"重力沉降+核桃壳过滤+纤维球过滤"三级工艺简化为"重力沉降+双滤料过滤"两级工艺。优化后设备集成度更高,设计处理能力优化缩减20%,设备负载率提高13.5%;过滤器由12具减少至4具,设备数量减少67%;反洗周期,由12 h延长至48～72 h,降低了反洗能耗;反冲洗水量,由435 m~3/d降至120 m~3/d,减少72.4%;预计采出水处理系统能耗可由改造前的71.2×10~4 kW·h降低至63.5×10~4 kW·h。     

低压稳流过滤器的研制及在油田污水处理中的应用

为了解决大庆油田现有核桃壳、石英砂过滤器反冲洗憋压、跑料和滤料再生困难等问题,在对原有过滤装置分析的基础上,根据反冲洗特性,对过滤器进行了改造,开发出低压稳流核桃壳过滤器和低压稳流石英砂过滤器。经现场测试,核桃壳过滤器反冲洗压力由原来的0.15～0.5 MPa降低到0.03～0.08 MPa,石英砂过滤器反冲洗压力由原来的0.27～0.46 MPa降低到0.17～0.20 MPa,且均能实现罐群水反冲洗。改造后核桃壳过滤器出水油平均含量13.4 mg/L,平均去除率为78.1%;出水悬浮物平均含量20.5 mg/L,平均去除率为55%。改造后石英砂过滤器出水油平均含量5 mg/L以下,平均去除率达到75%以上;出水悬浮物平均含量为9.8 mg/L,去除率达到80%以上。为了进一步提高过滤效果,在二级滤前投加絮凝剂形成微絮凝过滤工艺,出水悬浮物可达到3 mg/L,通过两级过滤达到特低渗透地层回注水标准。     

RP-1400a大气颗粒物(PM10)监测仪的日常维护经验

RP-1400a大气颗粒物(PM10)监测仪的日常维护和常见故障排除方法的一些经验.     

应用陶粒过滤-陶瓷膜组合对止咳糖浆制药废水深度处理的试验研究

止咳精浆制药废水经生物接触氧化一体化废水处理装置处理后,其出水中COD、BOD和氨氮等主要污染物质均不能达标排放.在实验室中采用陶粒过滤-陶瓷膜组合对经一体化处理装置处理后的制药废水进行深度处理,在陶粒柱反应器选用粒径为1～2 mm的陶粒滤料,陶瓷膜反应器选用孔径为2～3/μm陶瓷膜的条件下对水样进行测试.废水经陶粒过滤-陶瓷膜组合处理后,其BOD、COD、SS和氨氮指标均可稳定达标排放.