条形荷载下三明治形加筋土挡墙的变形特性分析∗

为了研究条形荷载作用下三明治形混合填土方式对加筋土挡墙变形特性的影响,采用 FLAC3D建立了数值计算模型,分析了三明治形加筋土挡墙的黏土弹性模量 E1、砂土弹性模量 E2、砂土厚度 d、筋材长度 L 以及荷载距面板距离 D 对挡墙变形特性的影响。结果表明：相对于加筋黏土挡墙,三明治形加筋土挡墙变形大幅减小,减少其墙顶沉降约 32%,减少面板位移约 44%;其土压力分布规律为墙后水平土压力大体上随填土深度的增加而增大;适当增大黏土弹性模量有利于减小挡墙顶面差异沉降;砂土存在一个最优弹性模量,使得面板水平位移最小;三明治形加筋土挡墙存在一个最优砂土厚度,使得三明治加筋土挡墙工作性能最佳;当 L/H≥0.7 时,继续增加筋材长度或当 D/H≥0.3 时,继续增大荷载距面板距离对挡墙影响相对较小。     

亚微米气溶胶高效过滤装置的设计

针对亚微米气溶胶颗粒进入大气中危害环境及人类的健康的问题,设计了一种移动式亚微米气溶胶高效过滤装置,采用最易穿透粒径法(MPPS)测试了装置的过滤效率,结果表明:该装置具有较高的过滤效率,在0.1~0.25μm粒径范围内,装置的过滤效率在99.999%以上,该设备可用于亚微米气溶胶颗粒的过滤净化。     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

光学气体成像技术在泄漏检测与维修中的应用研究

通过介绍光学气体成像技术的原理、泄漏检测与维修关键技术、甲烷气体泄漏检测与识别实验情况,讨论了该技术在石化生产过程中的应用发展趋势。     

春节期间南京市大气气溶胶粒径分布特征

为研究春节期间燃放烟花爆竹对城市大气气溶胶数浓度粒径谱分布的影响,对2012年1月19~31日南京大气气溶胶数浓度、污染气体浓度和质量浓度进行了观测分析.结果表明,烟花爆竹的燃放期间10~20 nm气溶胶浓度远低于非燃放期,50~100、100~200和200~500 nm数浓度有较大增加,20~50 nm和0.5~10μm气溶胶数浓度变化不大.烟花爆竹的燃放对气溶胶数浓度谱影响较大,非燃放期数浓度谱为双峰型分布;在燃放期数浓度谱为单峰性分布,且峰值向大粒径段偏移.烟花爆竹燃放期间质量浓度谱为双峰型分布,对细粒子的质量浓度影响较大,燃放期间PM2.5/PM10和PM1.0/PM10的值可升高10%.烟花爆竹的大量燃放对1.0~2.1μm粒径段气溶胶密度影响最大,对其他粒径段密度影响较小.     

北京雾霾天气生物气溶胶浓度和粒径特征

近年来北京雾霾天气频发,空气颗粒物聚集是导致雾霾天气发生的主要原因之一.作为一种重要的空气颗粒物,生物气溶胶对人体健康存在危害.本研究调查了雾霾天气时,生物气溶胶浓度和粒径分布规律;对其同空气质量指数PM2.5(AQI),环境温度和湿度间的Spearman’s相关性进行了研究;分析了冬夏两季重度雾霾天气时,生物气溶胶粒径分布规律.结果表明,生物气溶胶浓度与PM2.5(AQI)呈负相关,与环境温度呈正相关.环境湿度与细菌气溶胶浓度呈负相关而与真菌气溶胶浓度呈正相关.在冬季,最大浓度细菌和真菌气溶胶分别在4.5~7.0μm和2.1~3.3μm粒径范围内检测到,而夏季最高浓度细菌和真菌气溶胶均分布在3.3~4.5μm范围内.本研究结果将为不同雾霾天气下,评价生物气溶胶对人类健康造成的危害提供基础数据.     

全球环境展望5——我们未来想要的环境:第2章 大气

<正>联合国环境规划署(UNEP)于2012年9月正式发布了全球环境展望5(GEO-5)中文版,该报告评估了世界上最重要的90个环境目标的完成情况。最新发布的GEO-5中文版将为世界上人口最多国家的研究人员、学者、政府代表、行业和民间团体带来联合国最全面的环境评估。本刊自2012年06期起对其进行连载。报告来源:联合国环境规划署。     

环境监测实验室空气中汞污染与防治

采用冷原子吸收法,使用便携式测汞仪对实验室空气中汞的浓度进行测定,监测结果表明,环境监测实验室空气中汞的污染较为严重,主要来源于COD、氨氮、大气中氨及汞样品测定时含汞试剂及汞标液的使用和含汞废液的排放。根据对监测结果的评价和分析提出了相应的防治措施,提醒实验室的管理及分析人员,要增强环境保护意识,加强实验室的管理,减少含汞及其它有毒废液的排放,改善实验室的环境空气质量,保护分析人员的身体健康。     

利用SPAMS研究华北乡村站点(曲周)夏季大气单颗粒物老化与混合状态

利用单颗粒气溶胶飞行时间质谱(SPAMS)于2013年6月30日~7月8日对华北地区乡村站点曲周大气单颗粒粒径及其化学组成进行了在线测量,共采集到同时含有正负离子谱图的颗粒230 152个,其粒径主要集中在0.2~2.0μm.结果表明,该地区的大气颗粒物主要分为8类:元素碳(EC,55.5%)、有机碳(OC,10.7%)、钠,钾等碱金属颗粒(alkalis,17.4%)、其他金属颗粒(other metals,1.7%)、富铁颗粒(Fe-rich,6.3%)、富铅颗粒物(Pb-rich,3.1%)、沙尘颗粒(dust,4.8%),other颗粒(0.8%),观测得到的8类气溶胶颗粒中绝大部分包含46NO-2、62NO-3、80SO-3、96SO-4、97HSO-4等二次组分离子,说明这些颗粒都经历了不同的老化过程或与二次组分进行了不同程度的混合.从气溶胶类型的谱分布看,各类型颗粒数浓度峰值基本出现在700~800 nm之间,dust、Fe颗粒主要集中在粗粒径段,EC颗粒子类研究表明随着表面不断吸附NH+4、NO-3、SO2-4等二次组分,EC颗粒逐步演化成老化程度较低的NO-3吸附型EC(ECN)和严重老化的SO2-4吸附型EC(ECS)混合态,两者日变化呈现明显的负相关性,也可能随着二次有机物在EC表面吸附,形成OC/EC混合态.