硅烷偶联剂对油页岩灰渣制备疏水性SiO_2气凝胶介孔材料的影响

以油页岩灰渣制备的水玻璃为原料,采用不同种类的硅烷偶联剂,在常压下制备了多孔疏水SiO2气凝胶。实验结果表明:在常压干燥之前,对湿凝胶进行溶剂交换-表面改性,是获得多孔气凝胶的关键。未加入硅烷偶联剂制备的气凝胶具有微孔结构;不同硅烷偶联剂制备的SiO2气凝胶均为纳米颗粒组成的中孔结构,比表面积800~980 m2/g,密度0.084~0.11 g/m3,最可几孔径9.38~10.10 nm;FT-IR分析结果表明凝胶表面Si-OH已被改性为Si-CH3,表面呈现较强的疏水性,且疏水性HMDZ>TMCS>DMDC。TG-DTA实验结果表明,改性气凝胶的热稳定性都能达到350℃,HMDZ和TMCS的气凝胶具有更高的热稳定性。     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.     

斯道拉恩索将在美国投资建造生物质可再生材料示范工厂

近日,全球性生物质材料、纸张、包装和林木制品的创想者斯道拉恩索（Stora Enso）宣布,将投资3200万欧元（约合2．53亿元人民币）在美国路易斯安那州雷斯兰市建造一家生物质可再生材料示范性市场开发工厂,以对其新近全资收购的美国生物技术公司Virdia所开发的先进纤维素类生物质提取分离技术进行工业验证,助力斯道拉恩索生物质材料事业部在生物化学和生物质材料领域的发展壮大。     

未来10大高风险高回报的新技术

世界经济论坛全球事务理事会发布了一份关于信息技术的新报告,其中提到了10项有可能对全社会造成重大影响的新技术。这10项新技术涵盖了科学、医学、能源、制造、交通和电子等众多领域,理事会的报告简要说明了那些新技术将如何影响和改变我们的生活。     

锂电池正极材料Li2FeS2的充放电机理与热稳定性

随着移动电子设备的飞速发展,锂电池作为新型的能源载体也取得了巨大的进步。与嵌入式氧化物正极材料相比,Li2FeS2不仅具有理想的循环性能,而且其理论容量达到400mAh／g,约为嵌入式氧化物正极材料的2倍。因此,本文从晶体结构、电化学性能、充放电机制、充放电过程中的离子电导率变化以及热稳定性等方面对Li2FeS2正极材料进行了详细的阐述。     

用于电化学水处理技术的电极材料研究进展

电化学技术对水中污染物具有出色的去除效果,在解决传统净水技术的局限性方面有巨大潜力。该文综述了电絮凝、电氧化、电还原和电吸附技术去除水中污染物的原理以及各技术主要电极材料的最新研究进展。指出了在水处理领域电化学电极材料的发展方向,认为未来研究主要集中在产生混合金属氢氧化物絮体、较强吸附性能、具有高催化活性和高稳定性的电极材料上。最后指出了电极材料研究需要面临的挑战。     

纳米导电墨水

位于韩国大田市的ABC纳米技术公司,目前开发成功一种纳米导电墨水,可应用于正在高速发展的无线智能识别（RFID）电子标签、印刷电路板（PCB）、柔性印刷电路板（FPCB）,也可用于印刷电路板电磁波的屏蔽材料。     

热解含油污泥制备吸附材料浅析

介绍了含油污泥热解技术及热解实验方法,提出热解产生的残渣进行适当处理可成为具有吸附性的材料。进行了含油污泥热解正交实验,得出影响最大的因素分别是热解温度、热解时间、升温速率,并得出最佳的热解温度、热解时间、升温速率等。分析了含油污泥热解的机理,探讨了热解含油污泥制备吸附材料的活化改性,并在此基础上对所制备吸附材料的脱硫性和除油性进行了研究。     

添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥p H、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的p H在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(m S/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。