Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

协同氧化工艺处理焦化废水的试验研究

采用微电解-芬顿氧化的组合工艺处理末端焦化废水,考察静态实验中微电解填料的铁碳比、过氧化氢添加方式及加入量、曝气量、反应时间、pH值等不同条件因素对COD去除率的影响情况,确定最佳条件是铁碳质量比是2.5∶1,分批加入过氧化氢,且加入量为0.25 mL/L,曝气量为1.25 L/min,pH值为3,反应时间140 min.最终实现将焦化废水COD的去除率达88％以上的目的.按静态实验的各因素条件进行动态实验,试验结果COD去除率可达87％以上,处理后℃OD质量浓度为为91 mg/L,达到排放标准.同时处理后焦化废水的颜色变淡.     

低基质浓度下厌氧氨氧化反应器的启动

采用有效容积88.7 L的上流式厌氧填料床反应器启动厌氧氨氧化工艺.结果表明,在反应器运行的第119天NH4+-N,NO2--N和TN的去除率分别达100％,97.40％和91.71％,3种氮素的比值ρ(NH;-N):ρ(NO2--N):ρ(NO3--N)为1∶1.35∶0.28.随后通过缩短水力停留时间(HRT)的方式提高客积负荷,HRT从开始启动时的35.5 h逐步下降至15.2 h,至反应器运行末期,TN的客积负荷达0.10 kg/(m3·d),获得的具有厌氧氨氧化活性的污泥镜检呈红棕色.     

Origin of major ions in monthly rainfall events at the Bamenda Highlands, North West Cameroon

Rainwater characteristics can reveal emissions from various anthropogenic and natural sources into the atmosphere. The physico-chemical characteristics of 44 monthly rainfall events （collected between January and December 2012） from 4 weather stations （Bamenda, Ndop plain, Ndawara and Kumbo） in the Bamenda Highlands （BH） were investigated. The purpose was to determine the sources of chemical species, their seasonal inputs and suitability of the rainwater for drinking. The mean pH of 5 indicated the slightly acidic nature of the rainwater. Average total dissolved solids （TDS） were low （6.7 mg/L）, characteristic of unpolluted atmospheric moisture/air. Major ion concentrations （mg/L） were low and in the order K＋ 〉 Ca2＋ 〉 Mg2~ 〉 Na＋ for cations and NO3 〉〉 HCO3 〉 SO] 〉 CI- 〉 PO3- 〉 F- for anions. The average rainwater in the area was mixed Ca-Mg-SO4-CI water type. The CI-/Na＋ ratio （1.04） was comparable to that of seawater （1.16）, an indication that N a＋ and CI originated mainly from marine （Atlantic Ocean） aerosols. High enrichments of Ca2＋, Mg2＋ and SO2- to Na＋ ratios relative to seawater ratios （constituting 44% of the total ions） demonstrated their terrigenous origin, mainly from Saharan and Sahelian arid dusts. The K＋/Na＋ ratio （2.24）, which was similar to tropical vegetation ash （2.38）, and NO3 was essentially from biomass burning. Light （〈 100 mm） pre-monsoon and post-monsoon convective rains were enriched in major ions than the heavy （〉 100 mm） monsoon rains, indicating a high contribution of major ions during the low convective showers. Despite the acidic nature, the TDS and major ion concentrations classified the rainwater as potable based on the WHO guidelines.     

利用淀粉/PCL共混物作为反硝化固体碳源和生物膜载体的研究

以双螺杆挤出机制备了淀粉聚己内酯(PCL,polycaprolactone)共混物(SPCL5),研究了其浸出性能及吸水性能,并在序批试验中研究了其作为反硝化固体碳源和生物膜载体的特性。结果表明,SPCL5颗粒前3 d浸出的有机物浓度较高,随后逐渐降至1.31 mgL。SPCL5颗粒吸水率在1 d左右达到饱和,约为30.97%。SPCL5可作为固体碳源用于去除低碳氮比(CN)水中的硝酸盐。以活性污泥接种时,SPCL5颗粒在1 d后就有显著的脱氮效果。驯化结束后,SPCL5颗粒的平均反硝化速率(以N计)为0.020 8 mg(g·h)。剪切力是影响反硝化速率的重要因素,转速从70 rmin提高至140 rmin时,平均反硝化速率提升近1倍,达到0.040 3 mg(g·h)。进水NO3-N浓度为15~50 mgL时对反硝化速率无显著影响,反硝化为零级反应。红外光谱结果表明利用后的共混物中淀粉和PCL均发生了降解。     

焦化行业苯并芘排放量与厂界达标预测分析

论文以某100万吨/年焦化项目为例,分析其在不同地形和风速参数条件下苯并芘排放量,预测不同条件下距离焦炉炉体中心-1000～1000米范围内各网格点的苯并芘超标概率,最终得出风速、地形参数对苯并芘浓度超标概率的影响.     

基于蒙德法的固体火箭发动机水射流清理系统安全评价

安全性是固体火箭发动机水射流清理系统的第一要求。本文针对这一要求,采用蒙德火灾、爆炸、毒性指数评价法对固体火箭发动机水射流清理系统的4个单元进行了定量安全评价,得出了各单元的危险等级,并分析了水射流清理安全中的薄弱环节,进而提出了相应的安全措施,以为固体火箭发动机水射流清理系统的安全运行提供科学指导。     

焦炉排放多环芳烃与人体健康风险评价研究

焦炉炼焦产生多环芳烃物质(PAHs)具有较强毒性和致癌作用,本研究以某大型钢铁企业焦炉为例,采用AERMOD扩散模式来预测分析焦炉排放PAHs共13种污染物在大气中迁移扩散情况,采用BREEZE Risk Analyst根据人体健康风险评价导则HHRAP计算评价范围内受体人群PAHs污染物致癌和危害指数,对焦炉排放PAHs的健康风险进行了定量评价.结果表明,应重点关注焦炉排放萘危害指数值影响(最大值为0.97).焦炉排放各污染物单因子致癌风险均小于1.0E-06,而综合考虑多环芳烃总致癌风险值最大达到2.65E-06,对当地居民的人体健康可能存在一定的影响.     

焦化行业清洁生产指标体系的建立及应用研究

目前,焦化行业的清洁生产水平无量化标准,焦化企业间清洁生产水平无法量化比较,为此,将创新性地设立焦化行业的清洁生产指标体系和清洁生产指标体系的考核评分计算方法,将该体系应用于焦化行业的典型企业,对企业清洁生产水平量化打分,并进行了普适性研究。该方法的提出可以很好的解决对不同清洁生产水平的企业进行量化排序的问题,从而达到既能发现公司清洁生产潜力,又能够明确企业在同行业中的位置的目的。     

改性粉煤灰处理黑化集团焦化含酚废水的研究

焦化废水是一种典型的含有难降解有机污染物的工业废水,除含有酚类化合物外,还含有多种芳香烃和杂环类有机污染物,成分复杂,水量大,对环境污染严重。因此,焦化废水处理技术越来越受到环保部门的重视。本文摸索了改性粉煤灰处理焦化含酚废水的试验工艺条件,确定了反应条件,反应时间和反应温度。