浅谈电磁污染与电磁兼容技术

随着科学技术的迅速发展,电磁能利用范围不断扩大,电磁辐射大幅增加,电磁污染是继水污染、噪声污染、大气污染之后的第四大环境污染。电磁污染会损害人体健康、干扰电力电子设备运行及引发燃烧爆炸。应采用有效的电磁兼容技术进行防治,包括电磁屏蔽、滤波、系统接地和隔离等。     

超声辅助氨解预处理对纤维素酶酶解餐厨垃圾的影响研究

为了提高餐厨垃圾酶解产糖能力,从而能得到更多的燃料乙醇,就纤维素预处理对餐厨垃圾酶解产糖能力的影响进行了试验研究,考察了餐厨垃圾氨解、超声预处理对酶解产糖的影响规律。结果表明：在纤维素酶加酶量为12 g/100g实验垃圾样品、pH4.8、酶解糖化温度为42℃～58℃、反应时间为60 min的条件下,餐厨垃圾经过氨水-超声（10%氨水,固液比1∶20,超声30min）预处理的酶解产糖率比没进行预处理的产糖率有较大提高。     

Combined alkaline and ultrasonic pretreatment of sludge before aerobic digestion

Alkaline and ultrasonic sludge disintegration can both be used as pretreatments of waste activated sludge (WAS) for improving the subsequent anaerobic or aerobic digestion. The pretreatment has been carried out using different combination of these two methods in this study. The effect was evaluated based on the quantity of soluble chemical oxygen demand (SCOD) in the pretreated sludge as well as the degradation of organic matter in the following aerobic digestion. For WAS samples with combined pretreatment, the released COD was in high level than those with ultrasonic or alkaline treatment. When combined with the same ultrasonic treatment, NaOH treatment resulted in more solubilization of WAS than Ca(OH)2. For combined NaOH and ultrasonic treatments with different sequences, the released COD were in the order: simultaneous treatment > ultrasonic treatment following NaOH treatment > NaOH treatment following ultrasonic treatment. For simultaneous treatment, low NaOH dosage (100 g/kg dry solid), short duration (30 min) of NaOH treatment, and low ultrasonic specific energy (7 500 kJ/kg dry solid) were beneficial for sludge disintegration. Using combined NaOH and ultrasonic pretreatment with the optimium parameters, the degradation efficiency of organic matter was increased from 38.0% to 50.7%, which is much higher than with ultrasonic (42.5%) or with NaOH pretreatment (43.5%) in the subsequent aerobic digestion at the same retention time.     

Degradation of acid fuchsine by a modified electro-Fenton system with magnetic stirring as oxygen supplying

The current modified electro-Fenton system was designed to develop a more convenient and e cient undivided system for practical wastewater treatment. The system adopted a cathode portion that employed magnetic stirring instead of common oxygen gas di usion or gas sparging to supply oxygen gas for the electrolyte solution. Key factors influencing the cathode fabrication and activity were investigated. The degradation of acid fuchsine with a self-made graphite-polytetrafluorethylene cathode was studied using a spectrophotometer. It was found that the cathode generated hydrogen peroxide with high current e ciency and the hydrogen peroxide yield of the cathode did not decay after 10 times reuse. With the Pt anode at a ferrous ion concentration of 0.5 mmol/L, a pH of 3, and using magnetic stirring, dye decolorization could be rapidly accomplished but the destruction of benzene rings and intermediates was fairly di cult. With a Fe anode, dye degradation was more complete.     

电磁混响室的理论设计与场均匀性仿真

总结了混响室腔室和搅拌器的设计准则,并依此完成了最低可用频率为400MHz的混响室腔室和搅拌器的设计。利用FEKO软件对混响室建模,进行场均匀性仿真,计算工作区8个位置的电场,得到场标准偏差。仿真结果表明,设计的混响室性能完全符合标准IEC61000-4-21的规定,电场均匀性小于3dB。     

雷达电磁环境的联合建模与仿真

随着雷达灵敏度、精度的提高,对电磁环境的依赖性也越来越大.首先分析了美军的联合建模与仿真系统(JMASS),指出建立一个综合的、可重用的雷达电磁仿真环境是电子战仿真的关键;重点研究了基于球不变随机过程(SIRP)的K分布杂波模型,以及地面/海面的多路径效应模型;最后建立了雷达电磁环境的模型并进行了仿真.     

钢丝缠绕增强塑料复合管钢塑粘合状态的判别方法

钢丝缠绕增强塑料复合管(简称PSP)融钢管的高强度和塑料管的柔性、耐腐蚀于一体,广泛应用于能源、化工、海洋、资源输送等领域。PSP钢塑之间的粘合状态直接影响管道的安全使用。常规的无损检测方法难以检测PSP钢塑之间的粘合状态。笔者采用超声相控阵技术及B扫描实时成像技术,对PSP钢丝和塑料之间的粘接程度进行超声检测试验。通过试验研究得出:根据超声图像中钢丝成像规律和钢塑界面反射回波特征,可间接反映PSP钢塑之间的粘合状况。