谱系聚类法在小区域粮食安全预测中的应用——以昆山市为例

粮食安全对国民经济的可持续发展起着不可替代的基础性作用,小区域由于受政策因素的影响较大,粮食安全相关指标的变化呈一定阶段性,长时间序列的数学规律并不突出,不利于规划工作的展开。论文基于昆山市的研究,提出谱系聚类与数学模型相结合的基本思路,在此基础上推出了聚类结果有效性的量化判定标准并对聚类法运用准则做了深入的探讨。实际数据分析结果表明:昆山的粮食安全相关的社会经济指标变化确实呈明显阶段性;与利用全部时间序列数据建立的模型相比,运用谱系聚类的模型拟合和预测效果都有明显优势;至2015年,昆山市粮食自给率将下降至6%,最小人均耕地面积降低至0.022 hm²。通过进一步的分析、对比及讨论,文章认为,谱系聚类法运用于小区域粮食安全预测,方法可操作性强,结论科学性显著。     

漆酶催化酚类、苯胺类化合物的动力学分析及其测定废水中邻苯二酚的应用研究

含酚、苯胺类废水是环境中水污染的重要来源之一.本研究以漆酶分析酚类及苯胺类底物的动力学特性为基础,建立酚类、苯胺类化合物的分析方法.以分光光度法测定漆酶催化0～10mg/L酚类及苯胺类底物的反应速率,作出底物浓度与反应速率的标准曲线,采用漆酶筛查并检测了3种焦化废水中非挥发酚类含量.结果表明,漆酶的酚类及苯胺类底物主要以多元酚、氨基酚及多元胺为主,其中酚类的最适pH在7.0左右,苯胺类在4.5～5.0之间,各底物Km值大小在0.4～10mmol/L之间.除联苯胺外,分光光度法所得到的标准曲线均具有较好的一级反应动力学线性关系,相关系数R2在0.96以上.3种焦化废水中邻苯二酚含量分别为190.5、265.8和155.3mg/L,回收率介于91.9%～115.8%之间.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface.     

开放源类物料中微粒子排放估算模型的建立

利用实验室微粒子控制模拟试验装置,采用开放源类粉体物料自由下落溢出随机粉尘的实验研究方法,研究了济南市开放源类粉体物料自由下落过程中微粒子排放规律;在一定动力因素条件下,探讨了物料种类、粒度组成,物料含水率,环境空气湿度,自由下落中质量流量等因素对物料排放率的影响;通过数学归纳和模型化处理,建立了开放源类粉体物料自由下落过程中大气微粒子排放估算的数学模型;通过对实验数据进行回归分析后认为,粒径、含水率是对排放率影响最大的因素,质量流量是对排放率影响最小的因素。经试验验证,计算值与试验值基本一致。所获结论,对开放源类物料在转运、装卸、堆放等操作过程中大气微粒子的排放估算和综合防治具有重要的参考价值。     

地表水中石油类的测定及探讨

文章对影响地表水中石油类测定结果的因素进行探讨。通过克服这些影响因素,提高测定结果的准确性。并由实验证明,直接萃取法的检出限也能达到0.01 mg/L,满足这类低浓度石油类水样的测定。     

氧化亚铜类Fenton氧化降解染料活性艳蓝KN-R的研究

氧化亚铜(Cu2O)与H2O2组成的类Fenton体系能很好的氧化降解印染废水中的有机物.实验用Cu2O类Fenton氧化降解染料活性艳蓝KN-R,研究表明,Cu2O类Fenton能很好的氧化降解染料活性艳蓝KN-R.在KN-R的溶液初始pH值为2,水浴温度为50℃的条件下,用0.429 g Cu2O(0.3 mmol)和0.1 mL、质量分数为30%的H2O2处理50 mL、质量浓度为100mg/L的KN-R溶液1 h,其脱色率为95.09%,TOC去除率为56.38%.     

选址敏感类建设项目环境影响评估

项目选址对其进行科学的、客观的环境影响评估是十分关键的。因而,我们就要十分注意对项目环境影响评估相关技术的改进和提高,尤其是选址敏感类建设项目的环境影响评估技术的改进和提高。