生物过滤塔净化甲醛废气的动力学研究

选用榛子壳作为反应器的填料,利用沈阳北部污水处理厂的活性污泥对填料进行挂膜,由低到高通入甲醛气体进行驯化。在系统稳定后进行了生物过滤塔净化甲醛气体的实验研究,并建立了生物过滤塔降解甲醛气体的动力学模型。结果表明,入口气体浓度在低于25mg/m3时,甲醛废气的净化效率可保持在97％以上,超过此浓度值时,效率明显下降。随着进口气体流量的增加,净化率逐渐下降,由入口流量为0．2m3／h时的97．25％下降到入口流量为0．8m弧时的57．2％。根据现有动力学模型及本实验得出数据所建立的生物过滤塔净化甲醛气体的动力学模型,可以较好地模拟系统处理甲醛废气的实验结果,验证了模型的正确性。     

第11届空间环境防护材料与结构国际会议（ICPMSE-11）征文通知

随着空间探索步伐的迈进,人们需要了解更多空间环境对航天器材料与结构的影响,以便开展针对性防护。现代技术的高速发展为防护材料与结构提供了广阔空间。空间环境防护材料与结构国际会议（ICPMSE）即在此背景下应运而生。首次会议于1992年召开,之后逐渐发展,吸引了加拿大、美国、亚洲、欧洲的工业界、科研机构及政府部门积极参与,成为空间环境防护业界的国际性大会。     

舰载短波天线现存问题及对策

从多年工作经验出发,综述了某测量船舰载短波天线使用过程中出现的主要问题及潜在严重后果,从材料、结构等方面对其进行了深入分析,指出环境考虑不足、材料选择不当、结构存在缺陷是引发以上问题的根本原因。同时,结合工程实践,就如何在现有条件下提高舰载短波天线的可靠性,分别从如何选用合适材料、改进结构设计给出了意见建议。     

山东省住建厅推广建筑节能与结构一体化技术

从山东省住房城乡建设厅获悉．山东将逐步推广建筑节能与结构一体化技术．今后每个城市每年将开工建设3个以上的示范工程项目。据了解．建筑节能与结构一体化是指通过采取一定的技术措施．采用相应的墙体材料及配套产品．使墙体本身的热工性能等指标达到节能标准要求．实现集保温隔热功能与围护结构功能于一体。与传统的外保温技术相比．它具有保温层寿命长、施工安全隐患少、保温性能良好、建筑成本低等优点。     

小回流比条件下污泥浓度分区试验研究

用次毫米过滤（sub-milliFiltration,SMF）组件将生物处理系统内的污泥分为高浓度区和低浓度区,使高浓度区保持大量污泥,强化对有机物的去除,使低浓度区污泥浓度满足膜分离的要求.主要验证了小回流比（R为0.5、1.0、1.5、2.0）条件下污泥浓度分区的效果,考察了采用SMF组件后,系统对COD的去除效果,并将各小回流比条件下A、B两区污泥浓度的理论值和实测值做比较.结果表明,在小回流比条件下可实现污泥浓度分区,低浓度区的MLSS在9 g.L-1以下,高浓度区的MLSS在20 g.L-1以上;系统的COD平均去除率超过90%;A、B两区MLVSS的理论值与实测值具有相关性.     

壳聚糖络合-超滤耦合过程去除溶液中铅离子的研究

采用聚醚砜超滤膜,以壳聚糖为络合剂络合-超滤去除溶液中Pb2+,考察了溶液pH值、Pb2+/壳聚糖装载量比、离子强度和Ca2+各因素对Pb2+截留率的影响,同时研究了超滤浓缩时间对Pb2+截留率及膜通量的影响.结果表明,溶液pH是决定络合-超滤耦合过程能否进行的关键因素;在pH为6.0, Pb2+/壳聚糖装载量比为0.25时,络合-超滤耦合过程对溶液中Pb2+的截留率达99%以上.溶液离子强度和Ca2+的增加均不利于络合-超滤耦合过程对Pb2+的去除.对浓缩的壳聚糖-铅溶液酸化解络之后,进一步采用全过滤过程回收壳聚糖.回收后的壳聚糖重新用于络合-超滤耦合过程去除溶液中Pb2+,此时对Pb2+的去除率为96.2%,与新鲜的壳聚糖没有明显差别.研究结果显示采用壳聚糖络合-超滤耦合过程能有效去除溶液中铅离子,同时实现壳聚糖的有效回收.     

半干法脱硫配套布袋除尘器的特殊要求

由于半干法脱硫工艺对布袋除尘器的特殊要求,使得其配套的布袋除尘器构造不同于以往常规的布袋除尘器.从布袋除尘器的过滤风速、滤料选择、沉降室设置、布风均匀性、灰斗特性、旁路系统的要求做详细的说明.     

电袋复合除尘技术在燃煤电厂中的应用

电袋复合式除尘技术综合了电除尘和布袋除尘的收尘优点,通过除尘负荷的合理分配,实现了电除尘和布袋除尘的有机结合;采用基于表面过滤原理的新型滤料,可克服常规滤料清灰后除尘效率降低及滤袋易破损等缺点。电袋复合式除尘器在徐州坝山环保热电有限公司的应用实践表明,电袋复合式除尘器可保持高效稳定除尘同时节能,粉尘排放浓度达到了30 ...     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Remediation of copper polluted red soils with clay materials

Attapulgite and montmorillonite were utilized to remediate heavy metal polluted red soils in Guixi City, Jiangxi Province, China. The e ects of clay minerals on availability, chemical distribution, and biotoxicity of Cu and Zn were evaluated. The results provided a reference for the rational application of clay materials to remediate heavy metal contaminated soils. From the sorption experiment, the maximum adsorbed Cu2+ by attapulgite and montmorillonite was 1501 and 3741 mg/kg, respectively. After polluted red soil was amended with attapulgite or montmorillonite and cultured at 30 and 60 days, soil pH increased significantly compared to the control. An 8% increase in the amount of montmorillonite in soil and 30 days incubation decreased acid exchangeable Cu by 24.7% compared to the control red soil. Acid exchangeable Cu decreased with increasing amounts of attapulgite and montmorillonite, with best remediation e ect reached at a dose of 8%. Results also showed that the Cu poisoning e ect on earthworms was reduced with the addition of attapulgite and montmorillonite. Montmorillonite showed the best e ect, with the addition of a 2% dose the mortality of earthworms decreased from 60% to zero compared to the control. Our results indicated that the bioavailability of Cu in soils was reduced more e ectively with the application of montmorillonite than attapulgite.