Perfluorooctane sulfonate (PFOS) and other fluorochemicals in fish blood collected near the outfall of wastewater treatment plant (WWTP) in Beijing

Perfluorinated compounds (PFCs) were measured in zooplankton and five fish species collected from Gaobeidian Lake, which receives discharge from wastewater treatment plant (WWTP) in Beijing, China. The mean total PFCs in five fish were in the order: crucian carp > common carp > leather catfish > white semiknife carp > tilapia. Perfluorooctane sulfonate (PFOS) occurred at the greatest concentrations, with mean concentrations ranging from 5.74 to 64.2 ng/ml serum. Perfluorodecanoic acid (PFDA) was the second dominant PFC in fish samples except for common carp in which perfluorooctane sulfonamide (PFOSA) was dominant. A positive linear relationship (r² = 0.85, p < 0.05) was observed between ln PFOS concentrations (ln ng/ml) and trophic level (based on δ¹⁵N) if tilapia was excluded. The risk assessment showed that PFOS might not pose an immediate risk to fish in Gaobeidian Lake.     

Linking permit markets multilaterally

We formally study the determinants, magnitude and distribution of efficiency gains generated in multilateral linkages between permit markets. We provide two novel decomposition results for these gains, characterize individual preferences over linking groups and show that our results are largely unaltered with strategic domestic emissions cap selection or when banking and borrowing are allowed. Using the Paris Agreement pledges and power sector emissions data of five countries which all use or considered using both emissions trading and linking, we quantify the efficiency gains. We find that the computed gains can be sizable and are split roughly equally between effort and risk sharing.     

Ti-15-3热镦粗变形的数值模拟及实验研究

Ti-15-3合金的热镦粗过程进行了数值模拟和实验研究，分析了变形程度对Ti-15-3合金组织的影响。结果表明，Ti-15-3合金件热变形后，组织很不均匀，为了保证零件的性能，得到晶粒细化的均匀组织，热变形过程中的变形程度需要足够大。     

Preparation and evaluation of aminopropyl-functionalized manganese-loaded SBA-15 for copper removal from aqueous solution

A novel material, aminopropyl-functionalized manganese-loaded SBA-15 (NH₂-Mn-SBA-15), was synthesized by bonding 3-aminopropyl trimethoxysilane (APTMS) onto manganese-loaded SBA-15 (Mn-SBA-15) and used as a Cu^2 + adsorbent in aqueous solution. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectra (XRD), N₂ adsorption/desorption isotherms, high resolution field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the NH₂-Mn-SBA-15. The ordered mesoporous structure of SBA-15 was remained after modification. The manganese oxides were mainly loaded on the internal surface of the pore channels while the aminopropyl groups were mainly anchored on the external surface of SBA-15. The adsorption of Cu^2 + on NH₂-Mn-SBA-15 was fitted well by the Langmuir equation and the maximum adsorption capacity of NH₂-Mn-SBA-15 for Cu^2 + was over two times higher than that of Mn-SBA-15 under the same conditions. The Elovich equation gave a good fit for the adsorption process of Cu^2 + by NH₂-Mn-SBA-15 and Mn-SBA-15. Both the loaded manganese oxides and the anchored aminopropyl groups were found to contribute to the uptake of Cu^2 +. The NH₂-Mn-SBA-15 showed high selectivity for copper ions. Consecutive adsorption–desorption experiments showed that the NH₂-Mn-SBA-15 could be regenerated by acid treatment without altering its properties.     

Sources of nitrous and nitric oxides in paddy soils：Nitrification and denitrification

Rice-paddies are regarded as one of the main agricultural sources of N 2O and NO emissions. To date, however, specific N2O and NO production pathways are poorly understood in paddy soils. ^15N-tracing experiments were carded out to investigate the processes responsible for N2O and NO production in two paddy soils with substantially different soil properties. Laboratory incubation experiments were carried out under aerobic conditions at moisture contents corresponding to 60% of water holding capacity. The relative importance of nitrification and denitrification to the flux of NaO was quantified by periodically measuring and comparing the enrichments of the N2O, NH~-N and NO3-N pools. The results showed that both N2O and NO emission rates in an alkaline paddy soil with clayey texture were substantially higher than those in a neutral paddy soil with silty loamy texture. In accordance with most published results, the ammonium N pool was the main source of N2O emission across the soil profiles of the two paddy soils, being responsible for 59.7% to 97.7% of total N2O emissions. The NO3-N pool of N2O emission was relatively less important under the given aerobic conditions. The rates of N2O emission from nitrification （N2On） among different soil layers were significantly different, which could be attributed to both the differences in gross N nitrification rates and to the ratios of nitrified N emitted as NzO among soil layers. Furthermore, NO fluxes were positively correlated with the changes in gross nitrification rates and the ratios of NO/N2O in the two paddy soils were always greater than one （from 1.26 to 6.47）. We therefore deduce that, similar to N2O, nitrification was also the dominant source of NO in the tested paddy soils at water contents below 60% water holding capacity.     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

模拟海洋全浸区环境下A517海工钢的腐蚀机理研究

目的 探究 A517 海工钢在海洋全浸区环境下的腐蚀机理。方法 通过模拟海洋全浸区腐蚀环境,利用失重法、SEM、EDS、XRD、电化学等测试技术,分析A517钢的腐蚀行为历程,并探讨其在全浸区的腐蚀机理。结果A517钢在厚度方向上的最大电位差为 13 mV,小于发生电偶腐蚀的最小电位差50mV,说明材料在厚度方向上的腐蚀敏感性一致。随浸泡时间的延长,腐蚀质量损失量逐渐增加,平均腐蚀速率先降低、后升高、最后趋于稳定,腐蚀速率约为 0.127 mm/a。结论 腐蚀动力初期主要是由溶解氧的极限扩散控制,后期则是腐蚀产物的氧化还原电荷转移控制。腐蚀首先在 Al₂O₃、MgO 等夹杂物处萌生扩展,腐蚀产物出现明显的分层现象,外锈层主要是疏松易脱落的γ-FeOOH,内锈层主要是致密均匀的 Fe₃O₄,同时锈层中还检测到了β-FeOOH和α-FeOOH的存在。锈层中存在大量微裂纹,削弱了产物膜的保护作用,促进了腐蚀的进行。