无缝钢管局部径向模具塑性成形过程的三维有限元数值模拟

采用大变形弹塑性有限元理论,用DYNA3D(研究版)有限元软件,对无缝钢管局部径向模具塑性成形过程中当凸模的凹槽尺寸与凸模的圆弧半径发生变化时进行了数值模拟研究,得出了对成形钢管表面质量控制具有重要参考价值的结论,解决了成形钢管表面的压痕问题。     

Effects of bifenthrin on Daphnia magna during chronic toxicity test and the recovery test

IntroductionWiththedevelopmentandapplicationofnewpesticide ,insecticidehasgreatlyreducedtheharmofpesttocrops .Bifenthrinisaneffectivepyrethroidinsecticideandacaricideagainstawiderangeofinsectpests ,anditisverypoisonoustomammal,aquatic .Thisinsecticideiswi…     

镀液循环流量对封闭循环电沉积Ni-SiC复合镀层的影响

目的 研究封闭式镀液循环装置中不同镀液循环流量对Ni-SiC复合镀层的影响规律,优化镀液循环流量参数.方法 以Q235管状工件为待镀基体,以添加SiC颗粒的改良瓦特镀液为母液,在自主研发的封闭式镀液循环电镀装置中以0.3、0.5、0.7 m3/h的镀液循环流量于管件内壁制备Ni-SiC复合镀层,通过SEM检测、XRD测试、硬度测试和摩擦磨损性能测试等手段,对各Ni-SiC复合镀层宏微观形貌、厚度、成分、结构、硬度和耐磨性进行分析研究.结果 在0.5 m3/h流量条件下,镀层厚度为32.98μm,SiC颗粒含量为15.37％,镀层晶粒尺寸和硬度分别为10.84 nm和704HK0.245,该条件下制备的Ni-SiC复合镀层具有最佳耐磨性,摩擦系数为0.41,体积磨损率仅2.83×10–5 mm3/Nm.结论 在不同镀液循环流量参数下,采用该封闭式循环电镀装置,均可制得均匀完整的Ni-SiC复合镀层.随镀液循环流量的升高,镀层厚度和SiC颗粒体积含量均降低,镀层颜色金属光泽增强,镀层晶粒尺寸先减小、后增大,镀层硬度则先升高、后降低.     

三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.     

降低气流粉碎过程中噪声强度的研究

主要报导了超音速气流超细粉碎过程中噪声产生的原因、影响因素及降低噪声强度所采取的技术原理途径与措施。研究结果表明 :采用CSQ消声装置完全可以将超音速气流粉碎过程中产生的噪声 130dB(A)降低到国家规定的标准 85dB(A)之下。该装置结构简单 ,既能消除噪声 ,又便于产品卸料 ,拆卸清理方便 ,综合性能良好。     

高浓度Cl-水样CODcr的测定

阐述了高浓度Cl-水样,以铬酸钾做指示剂,加入适量的硝酸银,形成AgCl沉淀,消除了Cl-的干扰,再用离心沉淀机充分沉淀,取上清液,用COD快速测定仪测定CODcr,有很高的准确度,符合测定要求.     

Ag/Al2O3催化剂用于碳氢化合物选择性还原NO

比较了富氧条件下CH4、C3H8、C3H6和C2H5OH分别用作还原剂时,NO在Ag/Al2O3催化剂上的还原活性.结果表明, CH4和C3H8还原NO的活性很低,而C3H6和C2H5OH能有效地还原NO.在此基础上,研究了H2O和SO2对C3H6和C2H5OH在Ag/Al2O3催化剂上还原NO活性的影响.结果表明,H2O的存在会降低低温区的NO还原活性,而且这种影响是可逆的.将H2O 和SO2同时加入反应混合气,引起NO还原活性较大幅度降低,结合程序升温脱附实验结果,认为可能是由于存在SO2时,Ag/Al2O3催化剂吸附NO的能力降低.     

旋进型颗粒层除尘器的研究与试验

本文阐述了一种新型二级立式族进型颗粒层除尘器，它的关键技术采用独创的床外清灰及气流输送、滤料循环系统。该除尘器适用范围广、除尘效率高、成为新一代的除尘器专利产品。     

Detection of fetal HLA-DQα sequences in maternal blood: A gender-independent technique of fetal cell identification

The objective of this study was to detect fetal HLA-DQα gene sequences in maternal blood. HLA-DQα genotypes of 70 pregnant women and their partners were determined for type A1. We specifically sought couples where the father, but not the mother, had genotype A1. In 12 women, maternal blood samples were flow-sorted. Candidate fetal cells were isolated and amplified by using PCR primers specific for a paternal HLA-DQα A1 allele. Fetal HLA-DQα A1 genotype was predicted from sorted cells; amniocytes or cheek swabs were used for confirmation. Six of twelve sorted samples had amplification products indicating the presence of the HLA-DQα A1 allele; 6/12 did not. Prediction of the fetal genotype was 100 per cent correct, as determined by subsequent amplification of amniocytes or cheek swabs. We conclude that paternally inherited uniquely fetal HLA-DQα gene sequences can be identified in maternal blood. This system permits the identification of fetal cells independent of fetal gender, and has the potential for non-invasive prenatal diagnosis of paternally inherited conditions.