铁炭内电解法处理染料废水的试验

文章采用铁屑一活性炭内电解法作为光合细菌生化处理染料废水的预处理方法，考查了3个主要影响因素（铁炭比、停留时间、初始pH值）。结果表明，最佳的处理条件为：铁炭比为7：3，pH值为5，停留时间为60min。在上述最佳处理条件下，对初始COD为6790mg／L的染料废水处理效率可以达到66．1％，并且废水经预处理后可生化性得到大大提高，有利于后续生化处理的进行。     

Developing Canada's National Forest Carbon Monitoring, Accounting and Reporting System to Meet the Reporting Requirements of the Kyoto Protocol

The rate of carbon accumulation in the atmosphere can be reduced by decreasing emissions from the burning of fossil fuels and by increasing the net uptake (or reducing the net loss) of carbon in terrestrial (and aquatic) ecosystems. The Kyoto Protocol addresses both the release and uptake of carbon. Canada is developing a National Forest Carbon Monitoring, Accounting and Reporting System in support of its international obligations to report greenhouse gas sources and sinks. This system employs forest-inventory data, growth and yield information, and statistics on natural disturbances, management actions and land-use change to estimate forest carbon stocks, changes in carbon stocks, and emissions of non-CO₂ greenhouse gases. A key component of the system is the Carbon Budget Model of the Canadian Forest Sector (CBM-CFS). The model is undergoing extensive revisions to enable analyses at four spatial scales (national, provincial, forest management unit and stand) and in annual time steps. The model and the supporting databases can be used to assess carbon-stock changes between 1990 and the present, and to predict future carbon-stock changes based on scenarios of future disturbance rates and management actions.     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.     

活性炭吸附与生物活性炭脱臭效果的比较研究

针对污水收集与处理系统中恶臭气体的组成与特性,比较分析不同情况下活性炭吸附与生物活性炭的脱臭效果。当干活性碳总处理气量达到1.3m~3/g时,出现穿透。将吸附饱和的活性炭填料塔转为生物滴滤反应器后,仍能较快的实现挂膜生长,达到满意的处理效果。直接运行的生物活性炭滴滤器对H_2S的处理效率在95％以上,并具有较强的恢复能力。H_2S平均出口浓度为0.052mg/m~3。循环液pH值与盐度在一定范围内对系统影响不大。     

Can Forest-protection carbon projects improve rural livelihoods? Analysis of the Noel Kempff Mercado climate action project,Bolivia

We studied the Noel KempffMercado Climate Action Project (NKMCAP),Bolivia, to assess whether forestprotection carbon (C) projects cansignificantly benefit local people. Wehypothesized that forest protection canonly securely deliver C if significantstakeholders are meaningfully andtransparently involved, traditional orcustomary rights are recognized and theirloss compensated for, and there are directlinkages between conservation anddevelopment objective. Our researchfocused on 53 members of the communities ofFlorida, Porvenir and Piso Firme and 36secondary stakeholders. In each of thevillages we held half-day meetings withcommunity leaders, complemented bysemi-structured one-hour interviews with 5,10, and 7 families, representing 20%, 10%and 8% of each community. The long-termimpact of the NKMCAP on the localcommunities may well be positive. However,in the short run, certain sections of thelocal communities are financially poorer. Forest protection projects clearly have thepotential to sequester C, protectbiodiversity and simultaneously contributeto sustainable rural development, but ifthey really are to improve rurallivelihoods, they must be designed andimplemented carefully and participatively.     

活性炭性质对其吸附水中硝基苯性能的影响

通过对活性炭进行HNO3氧化及热处理改性,研究了活性炭性质对其吸附硝基苯性能的影响.以低温液氮(N2/77 K)吸附测定活性炭的比表面积和孔容、孔径分布;以Boehm滴定、零电荷点pHPZC的测定及元素分析定量表征活性发表面含氧官能团变化.结果表明:经改性后,活性炭比表面积及总孔容略有减小,表面性质发生较大变化.改性活性炭对硝基苯的吸附容量明显改变,吸附容量大小依次为:AC1′＞AC0′＞AC0＞AC1.经硝酸氧化后,比表面积下降、存在过多表面含氧官能团是导致AC1吸附硝基苯能力降低的主要原因;而AC1'表面适量酚羟基所提供的氢键吸附是其对硝基苯吸附量增加的主要原因.     

Climate Change and Energy Technologies

The long time scale of the climate change problem and the inherent nature of the carbon cycle bring important implications for present technology development efforts. Even if major technology improvements are achieved for non-carbon-emitting technologies such as energy-intensity improvements, wind, solar, biomass, and nuclear over the course of the 21^st century, most examinations of potential future greenhouse emissions conclude that additional technology development will be required to stabilize greenhouse gas concentrations. The evelopment of an expanded suite of technologies including carbon capture and disposal, hydrogen systems and biotechnology hold the potential to dramatically reduce the cost of stabilizing greenhouse gas concentrations. This paper examines these technologies in the context of a global integrated assessment model of energy, agriculture, land-use, economics, and carbon cycle processes.     

腕足类生物壳体在沉积、成岩过程中同位素平衡问题研究

综合分析了现代腕足类生物壳体方解石中的C、O同位素特征，以及有关古生代腕足类生物壳体方解石构造和地球化学研究成果，分析结果证明：只有那些无发光性特点、无胶结和溶蚀构造特点、有较好纤维构造特点、含高Sr、Na和低Mn、Fe（Mg）的第二层腕足类生物壳体方解石的δ18O值不受成岩作用影响；而原始层和壳体中的特殊部位如铰合轴、腕骨、茎孔、交互面、肌痕等在沉积、成岩过程中与海水处于非同位素平衡状态。     

活性艳红X-3B微波辅助光催化脱色的研究

研究了微波辅助光催化氧化(MW/UV/TiO2)处理活性艳红(X 3B)模拟废水。结果表明:400mg/LX 3B在反应150min时的脱色率由UV/TiO2体系的7.07%、MW体系的13.52%提高到了MW/UV/TiO2体系的56.35%。脱色反应速率随初始浓度(CX 3B)的增大而减慢;在强酸性介质中,脱色率更高;光照度(E)越强,越有利于X 3B脱色反应;改变催化剂投加量对X 3B脱色影响不大;H2O2浓度增加,X 3B脱色率升高;在以上条件下,X 3B的脱色反应均符合一级反应动力学方程,脱色反应中同时存在自由基反应与直接光解反应。     

温泉宾馆室内PM_(10),PM_(2.5),CO_2和~(222)Rn的研究

对广东省 4座温泉宾馆室内外氡(222Rn)浓度和温泉水氡浓度进行研究,同时利用便携式探测器对室内外 PM10,PM2.5,CO2和CO 等污染物暴露水平进行直接测定.结果表明,温泉宾馆室内使用温泉水时氡浓度明显高于广东省室内平均氡浓度.除 CO 外,室内 PM10,PM2.5 和CO2 浓度都较高,其中 PM10 和 CO2 的超标率分别达到 67%和 89%.说明温泉宾馆室内不仅存在一般性污染物,而且存在高浓度的 Rn. 222