Evaluating the efficacy of wood shreds for mitigating erosion

An erosion control product made by shredding on-site woody materials was evaluated for mitigating erosion through a series of rainfall simulations. Tests were conducted on bare soil and soil with 30, 50, and 70% cover on a coarse and a fine-grained soil. Results indicated that the wood product known as wood shreds reduced runoff and soil loss from both soil types. Erosion mitigation ranged from 60 to nearly 100% depending on the soil type and amount of concentrated flow and wood shred cover. Wood shreds appear to be a viable alternative to agricultural straw. A wood shred cover of 50% appears optimal, but the appropriate coverage rate will depend on the amount of expected concentrated flow and soil type.     

China's Total Emission Control Policy:a Critical Review

As part of a comprehensive environmental management system, many countries establish emission control targets for mass emissions of a pollutant. Such targets are often the key objective of an environmental policy, such as an emission trading program. In China, however, it is more than just an objective of one particular policy; it has become a concept that has influenced many national environmental policies and activities. The objective of this article is to review the implementation of the total emission c...     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

含油污泥调剖技术在陇东油田悦29区的应用

针对长庆陇东油田悦29区注水平面矛盾突出的特点,优选了含油污泥调剖技术。详细介绍了调剖体系的配制,调剖体系性能测试表明其相关性能指标满足要求。进行了驱替模拟试验,结果表明:其封堵作用可以维持较长时间,通过对不同注水井组进行现场应用,显示该技术能改善水驱开发效果,可以满足油藏深部封堵大孔道的技术要求,有增油降水效果。     

废钢铁切割加工烟尘的治理

介绍了氧-乙炔火焰切割加工废钢铁产生的烟尘治理系统的设计和系统设备选型,重点介绍了烟尘捕集罩的设计和除尘器、电磁脉冲阀、风机的选型和PLC自动控制以及系统实际运行效果,为废钢铁加工企业治理污染提供一套简单、经济、实用的除尘系统作参考.     

复杂社会技术系统安全控制人因研究的转变趋向

在分析复杂社会技术系统的特征及其事故机制的基础上,总结出目前安全控制的人因研究领域中的4种新趋向:分别是从关注个体因素到关注组织因素;从强调行政控制到呼吁社会控制;从考察近端因子到探讨远端征兆;从考核导向向优化发展导向。四大趋势的转变为系统的安全控制提供了新的视角,也开辟了安全控制研究新的领域。最后,笔者结合4方面的转变,针对我国实际情况提出了相应的企业安全管理建议。     

自动喷水灭火系统喷水强度概率分布特性及其控火性能研究

喷水强度是体现自动喷水灭火系统控火能力的重要参数,具有不均匀性和不确定性.传统的喷水强度设计主要考虑喷头的流量和保护面积,没有考虑其分布特性,对系统控火性能的影响.因此本文将喷水强度分布特性引入自动喷水灭火系统的控火性能研究.以公称口径为15 mm的传统下垂型玻璃球洒水喷头的喷水强度分布实验为基础,建立了包含径向距离和喷头工作压力等参数的喷水强度分布模型,采用蒙特卡罗方法获得了喷水强度的概率分布特性.参照不同危险等级场控火所需的喷水强度参数和不同喷头开启个数下的有效控火百分比,分析了喷水强度概率分布特性对控火性能的影响.研究结果表明,喷水强度概率分布特性对控火性能有重要影响,随径向距离的增加,喷水强度出现较小值的概率增大,控火性能下降,在某些危险较大的场所不能达到控火作用.对于同一危险等级场所,控火性能随着喷头安装间距减小而增强.研究方法可为合理评估喷头适用范围、优化喷头布置提供参考.     

"九五"期间乌鲁木齐市交通噪声的控制措施及效果

在分析交通噪声影响因素的基础上,对乌鲁木齐市近十年控制交通噪声污染的措施和效果进行了探讨。     

Artificial neural network based carbon monoxide persistence models for episodic urban air quality management

This paper describes the development of artificial neural network (ANN) based carbon monoxide (CO) persistence (ANNCOP) models to forecast 8-h average CO concentration using 1-h maximum predicted CO data for the critical (winter) period (November–March). The models have been developed for three 8-h groupings of 10 p.m. to 6 a.m., 6 a.m. to 2 p.m. and 2–10 p.m., at two air quality control regions (AQCRs) in Delhi city, representing an urban intersection and an arterial road consisting heterogeneous traffic flows. The result indicates that time grouping of 2–10 pm is dominantly affected by inversion conditions and peak traffic flow. The ANNCOP model corresponding to this grouping predicts the 8-h average CO concentrations within the accuracy range of 68–71%. The CO persistence values derived from ANNCOP model are comparable with the persistence values as suggested by the Environmental Protection Agency (EPA), USA. This work demonstrates that ANN based model is capable of describing winter period CO persistence phenomena.     

Biomonitoring of heavy metals by pollen in urban environment

Abstract Industrial development and consumption of petroleum products leads to increase air pollution levels especially in urban and industrial areas. Heavy metal components associated with air pollutants have far reaching effects with respect to economic and ecological importance of pollens. The pollens are male reproductive organs of the plant and travel through air from flower to flower for pollination purpose. During this period they are exposed to air pollutants. Present investigation thus pertains to study of effect of air pollutants on pollens especially biosorption and bioaccumulation of heavy metals. The pollens of three commonly occurring plants namely Cassia siamea, Cyperus rotundus, Kigelia pinnata have been studied from the NH-6 of Nagpur city, India. The pollens exposed to polluted air showed the presence of higher concentrations of Ca, Al and Fe as compared to unexposed pollens. Higher concentration of these metals was observed in Cyperus rotundus followed by Cassia siamea and Kigelia pinnata. These results indicate that pollens act as good indicator of air pollution giving results in short time of exposure of 5–10 h. Apart from this, it is also reported that some of these metals play crucial role in the metabolic activity in pollens for example Calcium is necessary for growth of pollen tube and other metabolic activities in pollens. The presence of these metals in pollens may also enhance the allergenicity of the pollens. Similarly accumulation of heavy metals may also deteriorate the quality of pollen for their economical use. The viability of pollen is also affected by these pollutants in sensitive species leading to impairment of their fertility.