Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².     

Environmental and economic assessment of a greenhouse waste heat exchange

As the economic costs of energy and the negative externalities associated with the combustion of fossil fuels threaten the economic viability of greenhouses in northern climates there is a renewed interest in the use of waste heat. This paper presents a technical and economic methodology to determine the viability of establishing waste heat greenhouses using the waste heat from industrial processes in northern climates. A case study is presented of an exchange between a tomato greenhouse and a flat glass manufacturing plant, which found the waste heat system is significantly more economic to operate than a purely natural gas system.     

1株脱氮除磷菌的筛选及其特性研究

采用YG培养基,结合蓝白斑筛选、异染粒染色及好氧除磷能力检测等实验,从城市生活污水处理厂好氧生化池的活性污泥中分离出7株好氧除磷菌;再经硝酸盐还原产气和缺氧培养实验,筛选出1株高效脱氮除磷菌;通过16S rRNA基因同源性比较和生理生化鉴定,初步将其鉴定为Pseudomonas grimontii,命名为C18.菌株C18在好氧培养24h后,培养基中上清液磷浓度从38.7mg/L降低到2.28mg/L,除磷率达94.1%.C18在缺氧培养24h后,培养基中上清液磷浓度从44.5mg/L降低到5.21mg/L,除磷率达88.3%;上清液硝酸盐氮浓度从184.2mg/L降低到30.6mg/L,脱氮率达83.4%.菌株C18最适脱氮除磷温度为30℃;最适脱氮除磷pH为7.5.     

无砾石微孔管地下渗滤系统试验研究

针对传统无砾石管式地下渗滤系统存在的处理性能差,渗滤通量低两个问题,通过去掉包裹织物,提高渗滤管开孔率、改变开孔方式,设计了无砾石微孔管地下渗滤系统。通过实验研究表明,无砾石微孔管地下渗滤系统对COD、氨氮的去除率比传统管式系统分别提高了10.8%、12.7%,总磷去除率并无显著差异,ORP值提高约85 mV,渗滤通量提高26.8%。在3.3 cm/d的水力负荷下,无砾石微孔管地下渗滤系统出水COD、氨氮、总磷平均浓度分别为19 mg/L,0.62 mg/L,0.048 mg/L。渗滤管下10 cm的土壤层去除了约70%的COD,80%的氨氮和91%的总磷,向下随着土壤深度的增加,单位厚度的土壤层去除的污染物量呈显著下降趋势。     

空气自动监测网络数据有效性的自动化判别

以山东省空气自动监测网监测数据有效性的自动化判别为例,阐述了自动化判别的主要思路、判别程序和判别规则,探讨了省级或区域级空气自动监测网络的数据自动化判别方法.     

有关斜管沉淀池的上升流速讨论

文章从理论上了分析斜管沉淀池上升流速对沉淀池处理效果的影响,及原水特性与斜管沉淀池上升流速取值的关系。讨论分析斜管沉淀池设计时,应根据原水特性不同选择不同的斜管沉淀池上升流速。     

我国空气自动监测系统的现状与发展趋势

结合四川省环境空气自动监测系统的运行,从运行管理模式方面探讨了我国空气自动监测系统的发展现状,以及通过国内外环境空气评价指标的比较,探讨了现阶段中国环境空气质量评价体系的不足以及增加空气污染指数分指标的必要性.     

应用加载磁絮凝技术处理垃圾渗滤液试验研究

垃圾渗滤液是一种成分复杂多变的高浓度难处理有机废水。本研究采用加载磁絮凝技术对垃圾渗滤液进行预处理,并讨论了适宜的磁载体、凝聚剂和絮凝剂的加入量。     

模拟水体硝态氮对黄菖蒲生长及其氮吸收的影响

为了对挺水植物在水环境与水生态修复中的应用提供参考依据,选取黄菖蒲(Iris pseudacorus L.)为对象,通过模拟水培实验,对比研究了6种水体硝态氮质量浓度(10.68、23.88、42.22、63.33、82.92、97.13 mg·L~(-1))下,黄菖蒲地上和地下生物量、根冠比、叶绿素含量、氮累计吸收量以及对硝态氮去除效果的差异,以期明确模拟水体硝态氮质量浓度对黄菖蒲生长及其氮吸收能力的影响.结果显示,首先,不同硝态氮质量浓度对黄菖蒲地上部分(茎叶)生长的影响大于地下部分(根);当硝态氮质量浓度为10.68 mg·L~(-1)时,黄菖蒲的根冠比增加;当硝态氮质量浓度为42.22~97.13 mg·L~(-1)时,黄菖蒲的根冠比减少.其次,黄菖蒲适宜生长的硝态氮质量浓度为23.88~63.33 mg·L~(-1);硝态氮质量浓度低于10.68 mg·L-1或高于82.92mg·L-1时,均会对黄菖蒲的叶绿素合成产生抑制作用.再次,黄菖蒲对氮的累积量随硝态氮质量浓度增加而增加,且地下部分对氮的累积能力优于地上部分;6种浓度下,单株黄菖蒲的氮累计吸收量为10.56~75.43 mg,其地下部分依次为地上部分的7.2、2.3、2.5、2.1、1.6以及1.5倍.此外,黄菖蒲对氮的利用效率与硝态氮质量浓度之间成显著的幂函数关系,且地上部分的氮利用效率高于地下部分.最后,黄菖蒲对硝态氮的去除率随硝态氮质量浓度增加而增加,6种浓度下黄菖蒲对硝态氮的去除率介于94.9%和99.3%之间,且水体中硝态氮质量浓度随时间延续呈指数函数降低.结果表明,黄菖蒲对硝态氮有很好的去除效果,但黄菖蒲的生长及其对氮的吸收与去除效率受水体硝态氮质量浓度影响显著,且地上部分较地下部分更为敏感.