Variable-density flow in heterogeneous porous media — Laboratory experiments and numerical simulations

Konz, M., Ackerer, P., Younes, A., Huggenberger, P., Zechner, E., 2009a. 2D Stable Layered Laboratory-scale Experiments for Testing Density-coupled Flow Models. Water Resources Research, 45. doi:10.1029/2008WR007118., a series of laboratory-scale 2D tank experiments were conducted and accurately simulated for density driven flow problems on homogeneous porous media. In the present work, we extended the numerical and experimental studies to heterogeneous problems. The heterogeneous porous medium was constructed with a low permeability zone in the centre of the tank and had well-defined parameters and boundary conditions. Concentration distributions were measured in high resolution using a photometric method and an image analysis technique. The numerical model used for the simulations was based on efficient advanced approximations for both spatial and temporal discretizations. The Method Of Lines (MOL) was used to allow higher-order temporal discretization. Three different boundary conditions, corresponding to different localizations of the inflow and the outflow openings at the opposite edges of the tank, were applied to investigate different flow scenarios in the heterogeneous porous medium flow tank. Simulation results of all three density coupled experiments revealed a density-dependent behavior of dispersion. Thus, a reduction of dispersivites was required to obtain a good matching of the experimental data. The high quality of the experiments enabled a detailed testing of numerical variable-density flow codes under heterogeneous conditions. Therefore, the experiments were considered to be reliable benchmark tests.     

Genotoxic effect of polycyclic aromatic hydrocarbons in the metropolitan area of Porto Alegre, Brazil, evaluated by Helix aspersa (Müller, 1774)

The purpose of this study was to biomonitor metropolitan areas of Porto Alegre (Brazil) for PAHs associated with atmospheric particles and check their effects on the DNA of the land mollusk Helix aspersa. The sampling sites are located in an urban area with heavy traffic: (i) Canoas, (ii) Sapucaia do Sul, and (iii) FIERGS/Porto Alegre. The samples were collected during a continuous period of 24 hours during 15 days using Stacked Filter Units (SFU) on polycarbonate filters (two separated size fractions: PM_10-2.5 and PM_<2.5). The concentrations of 16 major PAHs were determined according to EPA. Comet assay on H. aspersa hemolymph cells was chosen for genotoxicity evaluation. This evaluation shows that, in general, the smaller PM-size fractions (PM_<2.5) have the highest genotoxicity and contain higher concentrations of extractable organic matter. In addition, associations between chemical characteristics and PM carcinogenicity tend to be stronger for the smaller PM-size fractions.     

Probabilistic distribution coefficients (Kds) in freshwater for radioisotopes of Ag,Am, Ba,Be, Ce,Co, Cs,I, Mn,Pu, Ra,Ru, Sb,Sr and Th – implications for uncertainty analysis of models simulating the transport of radionuclides in rivers

The objective of this study was to provide operational probability density functions (PDFs) for distribution coefficients (K_ds) in freshwater, representing the partition of radionuclides between the particulate and the dissolved phases respectively. Accordingly, the K_d variability should be considered in uncertainty analysis of transport and risk assessment models. The construction of PDFs for 8 elements (Ag, Am, Co, Cs, I, Mn, Pu and Sr) was established according to the procedure already tested in Durrieu et al. [2006. A weighted bootstrap method for the determination of probability density functions of freshwater distribution coefficients (K_ds) of Co, Cs, Sr and I radioisotopes. Chemosphere 65 (8), 1308–1320]: (i) construction of a comprehensive database where K_ds values obtained under various environments and parametric conditions were collected; (ii) scoring procedure to account for the ‘quality’ of each datapoint (according to several criteria such as the presentation of data (e.g. raw data vs mean with or without replicates), contact time, pH, solid-to-liquid ratio, expert judgement) in the construction of the PDF; (iii) weighted bootstrapping procedure to build the PDFs, in order to give more importance to the most relevant datapoints. Two types of PDFs were constructed: (i) non-conditional, usable when no knowledge about the site of concern is available; (ii) conditional PDFs corresponding to a limited range of parameters such as pH or contact time; conditional PDFs can thus be used when some parametric information is known on the site under study. For 7 other radionuclides (Ba, Be, Ce, Ra, Ru, Sb and Th), a simplified procedure was adopted because of the scarcity of data: only non-conditional PDFs were built, without incorporating a scoring procedure.     

Changes in the structure of chortobiont invertebrate community exposed to emissions from a copper smelter

The aboveground phytomass of meadow plants and the density of chortobiont invertebrates in secondary upland meadows were estimated using a biocenometer in three areas differing in the level of pollution with emissions from the Middle Ural Copper Smelter (Revda, Sverdlovsk oblast) in 2006 and 2007. As the smelter is approached, the total amount of phytomass (dry weight) decreases by a factor of 1.3–1.9, with the proportion of grasses reaching 100%; the total abundance of invertebrates increases two-to threefold due to sucking phytophages, which account for up to 80% of the invertebrate community. The abundance of gnawing phytophages near the smelter is reduced, with some taxa entirely missing (e.g., mollusks and phalangiid harvestmen). Rearrangements in chortobiont community structure are attributable to changes in the physiological state of plants and in the species diversity and architecture of the herbaceous layer, with consequent modification of hydrothermal conditions in it, as well as by the direct toxic effect of heavy metals.     

气溶胶灭火剂燃速影响因素的研究

针对同一配方的不同条件下的灭火剂,从灭火剂的初温、药柱密度、原料粒度等方面入手,考察了不同因素对灭火剂燃速的影响,总结出各个因素对灭火剂燃烧速度的影响规律.     

Modelling the Removal of Gaseous Pollutants and Particulate Matters from the Atmosphere of a City by Rain: Effect of Cloud Density

In this paper, an original nonlinear mathematical model for the removal of gaseous pollutants and particulate matters from the atmosphere of an industrial city by rain is proposed and analyzed. It is assumed that five interacting phases in the atmosphere of the city exist, i.e., cloud droplets phase, raindrops phase, gaseous pollutants phase, particulate matters phase, and the phase of absorbed gaseous pollutants in raindrops. It is assumed further that these phases undergo nonlinear interactions in the atmosphere, while gaseous pollutant interacts with cloud droplets as well as with raindrops but particulate matters interact only with raindrops. The gravitational settling and reversible reaction processes have also been considered appropriately in the model. By analyzing the model, it is shown that both the gaseous pollutants and particulate matters may be removed from the atmosphere under certain conditions, provided the rates of formation of cloud droplets and raindrops are sufficiently large. It is noted that under unfavorable atmospheric conditions, rain does not occur and pollutants are not removed from the atmosphere.     

Adaptation of Nitraria sphaerocarpa to wind-blown sand environments at the edge of a desert oasis

This study addresses the adaptation of Nitraria sphaervcarpa to blown sand at the edge of a desert oasis with regard to the aspects of soil seed banks, seedlings, and population. Horizontally, the total number of seeds per unit area decreased from the shrub canopy center to intershrub areas, and most seeds were found under shrub canopies. Vertically, the highest proportion of seeds was found at depths of 5-10 cm. The emergence percentage, seedling mass, and seedling height, which were significantly affected by both burial depth and seed size, were highest at the optimal burial depth of 2 cm, and decreased with increasing burial depth in each seed size-class. Although seedling mass was usually greatest for large seeds and least for small seeds at each burial depth, little difference was observed in seedling height at shallow burial depths of 0-3 cm. The population shows a patchy and discontinuous distribution pattern. Population height increases with increasing sand depth. Also the density increases with increasing depth of sand in the desert; however, there is a steady decrease when the depth of sand is more than 100 cm. This result indicates that the depth of sand that is most suitable for the growth of Nitraria sphaervcarpa is 100 cm. The size of the population is significantly correlated with the sand depth, which increases with increasing depth in the desert.     

Effect of Sb dopant amount on the structure and electrocatalytic capability of Ti/Sb-SnO2 electrodes in the oxidation of 4-chlorophenol

Ti/Sb-SnO_2 anodes were prepared by thermal decomposition to examine the influence',of the amount of Sb dopant on the structure and electrocatalytic capability of the electrodes in the oxidation of 4-chlorophenol.The physicochemical properties of the Sb-SnO_2 coating were markedly influenced by different amounts of Sb dopant.The electrodes,which contained 5% Sb dopant in the coating, presented a much more homogenous surface and much smaller mud-cracks,compared with Ti/Sb-SnO_2 electrodes containing 10% or 15% Sb dopant,which exibited larger mud cracks and pores on the surface.However,the main microstructure remained unchanged with the addition of the Sb dopant.No new crystal phase was observed by X-ray diffraction(XRD).The electrochemical oxidation of 4-chlorophenol on the Ti/SnO_2 electrode with 5% Sb dopant was inclined to electrochemical combustion;while for those containing more Sb dopant,intermediate species were accumulated.The electrodes with 5% Sb dopant showed the highest efficiency in the bulk electrolysis of 4-chlorophenol at a current density of 20 mA/cm~2 for 180 min;and the removal rates of 4-chlorophenol and COD were 51.0% and 48.9%,respectively.     

Effect of stocking density and food quality on the growth and fecundity of an epigeic earthworm (<Emphasis Type="Italic">Eisenia fetida</Emphasis>) during vermicomposting

Physico-chemical characteristics of the feed and optimum worm density are important parameters for the efficient working of a vermicomposting system. Overcrowding of worms can affect the efficiency of a vermicomposting system even if all other parameters have been optimized. This article reports the effect of stocking density and feed quality on the growth and fecundity of Eisenia fetida under laboratory conditions. The feed mixtures contained cow dung and textile mill wastewater sludge in different ratios. Three feed mixtures and five stocking rates (1, 2, 4, 8, and 12) were tested for 12 weeks. The results showed that E. fetida growth rate was faster at higher stocking densities; however, biomass gain per worm was faster at lower stocking densities. Sexual maturity was attained earlier at higher stocking densities. Growth rate was highest in 100% cow dung at all the stocking densities when compared to textile mill wastewater sludge containing feed mixtures. A worm population of 27–53 worms per kg of feed was found to be the most favorable stocking density.     

Determination of granule size distribution in a UASB reactor

Granular sludge is the key factor for an efficient operation of an upflow anaerobic sludge blanket (UASB) reactor. In order to monitor the granularity of anaerobic sludge, the determination of the granule size distribution is of vital importance. For this reason, several techniques have been proposed; however, they are either tedious, imprecise or expensive and hardly applicable in full-scale treatment plants. There was then the need for a simple and low-cost technique. This technique involves the determination of the settling velocities of a sludge sample and of extrapolating the corresponding diameters using a mathematical algorithm. In the proposed algorithm, the granules density was calculated, the flow regime was examined and finally the granule size distribution was obtained. Two very important correlations were suggested by the experimental results. The granule density and diameter were strongly correlated with the VSS/TSS ratio.