珠江八大入海口门可溶态铜的时空变化及其影响因素

以1987年至2011年的月测数据为基础,分析了珠江八大人海口可溶态铜的时空变化,并探讨了工业发展、铜矿厂分布、水产养殖及铜消费量等因素对它们的影响。研究结果表明:与国内外其它人海口相比,珠江口可溶态铜的含量处于较高水平,其中,虎门水道(A1)可溶态铜的含量显著高于除鸡啼门水道(A6)外的其它人海口(p0.1),可能是受工业废水排放及铜矿厂分布的影响。在时间变化趋势上,8个采样点之间,除了A1与A4外,其它采样点间均呈显著的正相关性(p0.1),其中A5和A6的变化趋势还与我国的铜消费量具有显著相关性(p0.1),表明人海口之间铜污染可能具有相似的影响因素,且工业生产活动对水体铜污染的波动具有一定的影响。     

Adsorptive removal of mercury from acid mine drainage: a comparison of silica and maghemite nanoparticles

Mercury adsorption by silica and maghemite nanoparticles (NPs) was studied with the aim of comparing their performance in the remediation of acid mine drainage (AMD) contaminated water. Calculated distribution coefficients (K_d) showed that both NPs are exceptional adsorbents. However, adsorbate coverage per unit area was 30 times higher for maghemite than for silica NPs, despite the latter having a surface area ～15 times greater. Maghemite adsorbed 75% of available Hg compared to 56% by silica, making it a more efficient sorbent than silica under AMD conditions. Kinetics and isotherm data for both adsorbents were fitted by the pseudo-second-order (R² = 1) and the Freundlich (R² ≥ 0.98) models, implying that adsorption to both NP types was by chemisorption. Adsorption increased with NP concentrations and pH and was enhanced in the presence of manganese and sulfate ions although adsorption to silica was inhibited in 1:2 Hg-to-Mn systems. Importantly, trends in simulated wastewater were replicated in actual AMD-contaminated water samples. This study highlights the fact that properties besides surface area and charge of adsorbents determine adsorbent performance, and superior attributes may not always lead to higher adsorption efficiencies.     

高密度沉淀-活性砂过滤工艺在钢铁工业废水处理中的应用

采用调节池-高密度沉淀池-活性砂滤池-消毒为主要处理工艺,处理钢铁工业废水并回用,介绍该工艺技术特点、主要构筑物的技术参数以及运行效果。工程监测结果表明,该工艺对总硬度、浊度及COD的去除率分别达到60%、85%及62%以上,出水水质各项指标均达到《城市污水再生利用工业用水水质标准》(GB/T19923-2005)要求。处理系统运行稳定,耐冲击能力强。     

水稻秸秆沟埋还田对麦田土壤环境的影响

通过大田试验,采用秸秆沟埋还田方式,设置沟埋深度分别为20、30、40、50 cm及对照5个处理,将上季作物秸秆进行全量还田(秸秆沟埋量为2 kg.m-1),研究水稻秸秆沟埋还田对麦田土壤含水量、温度、容重和孔隙度等的影响。结果表明,降水结束后12 d内,沟埋深度20和30 cm处理土壤含水量(与埋草沟边水平距离10 cm处)显著下降(P<0.05);而沟埋深度40和50 cm处理土壤含水量(与埋草沟边水平距离10 cm处)与对照差异未达显著水平。埋草沟秸秆下层土壤温度变化较小,秸秆对下层土壤具有保温作用;除沟埋深度20 cm处理外,其他不同沟埋深度处理均能明显降低秸秆上层土壤容重,增加土壤总孔隙度,使耕层土壤疏松。     

网状铝合金抑爆材料抑爆性能研究

为评价网状铝合金材料的阻隔防爆性能,基于多孔材料的阻隔防爆机理,采用抑爆材料抑爆性能测试装置和可燃气体爆炸箱及高速摄像机,研究材料在不同填充密度、不同留空率下对液化石油气的燃爆压力的影响,及液化石油气火焰在填充材料的爆炸箱中的传播过程。试验结果表明:填充密度为35 kg/m3、留空率为5%时,材料抑爆性能最好;当抑爆材料在容器内的填充密度一定时,其燃爆压力随留空率增加而增加;与未填充材料相比,填充材料后火焰衰减;此外,得到填充密度、留空率和燃爆压力间的数学拟合公式。降低留空率、增加填充密度能够更好地提高阻隔防爆性能。     

小环境密闭空间初始压力对预混合可燃性气体爆炸的影响

在工程应用中,初始压力的增高一般都能提高预混合可燃性气体爆炸的强度,缩小反应设备的体积.因此研究在小环境密闭空间下初始压力的变化对预混合可燃性气体爆炸的特性与规律是十分必要的.本文运用AutoReaGas爆炸仿真模拟器定量研究了小环境密闭空间的初始压力对预混合可燃性气体爆炸的影响.其结果表明,在相同小环境密闭空间尺寸下利用AutoReaGas爆炸仿真模拟器充入相同条件的预混合可燃性气体.其预混合气体密度、冲击波产生的超压都随着初始压力的增加而增大;并且爆炸超压与初始压力呈近似的线性关系;但各个观测点的温度和速度并不随着初始压力的增加而变化.研究所取得的成果可为今后的工程应用提供一定的理论数据指导.     

秦皇岛洋河－戴河沿海平原海水入侵数值模拟分析

在分析洋河-戴河沿海平原水文地质条件的基础上,运用FEFLOW软件,建立了三维变密度溶质运移模型。以2002-12至2004-12的地下水位和水质观测资料,对模型进行了率定。用检验后的模型对研究区海水入侵原因进行了模拟分析,对不同开采条件、不同防治措施下的海水入侵发展趋势进行了预测。模拟结果表明：滨海地区超采地下水是造成海水入侵的根本原因,河流长期低水位导致海水倒灌加剧了海水入侵的程度;在滨海地区,只要地下水降落漏斗存在,就会引发海水入侵进一步向内陆移动;同时,根据预测结果,提出了防止和减缓海水入侵的措施。     

Development of an integrated decision-support model for density management within jack pine stand-types

The objectives of this study were to (1) develop a modular-based structural stand density management model (SSDMM) and corresponding algorithmic analogue for natural (naturally regenerated stands without a history of density regulation) and managed (naturally or artificially regenerated stands with a history of density regulation) jack pine (Pinus banksiana Lamb.) stand-types, and (2) demonstrate the utility of the model in operational density management decision-making. Employing an Ontario-centric database consisting of 262 and 221 tree-list measurements obtained from 91 and 139 permanent and temporary sample plots situated within natural and managed stand-types, respectively, combined with data derived from density control experiments and sawmill simulation studies, six integrated estimation modules were constructed: Module A consisted of the parameterization of the core yield–density relationships which together drive the entire yield prediction system (e.g., size–density relationships for quadratic mean diameter, dominant height, mean volume, and mean live crown ratio, and site-specific height–age relationships); Module B consisted of the development of Weibull-based parameter prediction equation systems for recovering diameter distributions and composite height-diameter equations for height estimation; Module C consisted of the development of composite taper equations for predicting log products and stem volumes; Module D consisted of the development of allometric-based composite biomass equations for each above-ground component (bark, stem, branch and foliage) from which biomass estimates and associated carbon-based equivalents were derived; Module E consisted of the development of sawmill-specific composite equations for estimating chip and lumber volumes; and Module F consisted of the development of composite equations for estimating wood density and mean maximum branch diameter. The utility of the model was demonstrated by simultaneously contrasting a set of complex density management regimes (commercial thinning and variable planting densities) in terms of a broad array of stand-level yield outcomes and performance measures: overall productivity, log-product distributions, biomass production and carbon yields, recoverable products (chip and lumber volumes) and associated monetary values, economic efficiency, duration of optimal site occupancy, structural stability, and fibre attributes (wood density and mean maximum branch diameter). In summary, the modular-based SSDMM provides the analytical foundation for evaluating the likelihood of realizing a multitude of stand-level objectives when designing density control regimes for jack pine stand-types.     

Egg composition in relation to social environment and maternal physiological condition in the collared flycatcher

Offspring survival can be influenced by resources allocated to eggs, which in turn may be affected by the environmental factors the mother experiences during egg formation. In this study, we investigated whether experimentally elevated social interactions and number of neighbouring pairs influence yolk composition of collared flycatchers (Ficedula albicollis). Social challenge was simulated by presentation of a conspecific female. Experimental females spent more time near the cage and produced eggs with higher androgen concentration, but local breeding density did not affect yolk androgen level. Moreover, we found that females exposed to more intra-specific interactions and those that bred at higher density produced eggs with smaller yolk. These females may be more constrained in foraging time due to more frequent social encounters, and there might be increased competition for food at areas of higher density. In contrast, the present study did not reveal any evidence for the effect of social environment on yolk antioxidant and immunoglobulin levels. However, we found that yolk lutein and immunoglobulin concentrations were related to the female’s H/L ratio. Also, yolk lutein and α-tocopherol levels showed a seasonal increase and were positively related to the female’s plasma carotenoid level. Mothers may incur significant costs by transferring these compounds into the eggs, thus only females in good physiological condition and those that lay eggs later, when food is probably more abundant, could allocate higher amounts to the eggs without compromising their defence mechanisms. Our results suggest that environmental circumstances during egg formation can influence conditions for embryonic development.