无机/有机高分子复合絮凝剂处理含油废水

制备了聚硅酸硫酸铝(PSAS)、淀粉改性絮凝剂(FSM),并将其复配使用处理含油废水。考察了不同淀粉与丙烯酰胺配比及不同加药顺序对絮凝效果的影响。实验结果表明:淀粉与丙烯酰胺单体最佳配比为1∶2,PSAS、淀粉改性高分子絮凝剂先后投加处理含油废水时絮凝效果最好,含油量去除率达94%,达到回注水要求。     

Using soybean isoflavone to prevent hydrogen production reaction of aluminium dust and water in wet dust removal systems

Using a dry dust removal system used for aluminium dust collection presents a dust explosion risk, whereas a wet dust removal system presents a risk of hydrogen fire and explosion. Neither system can attain a sufficient level of safety for use at aluminium processing sites. In this paper, soybean isoflavone, a non-toxic and environmentally sustainable flavonoid, was investigated to inhibit hydrogen production from aluminium dust and water. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR) were used to characterize aluminium particles before and after the reaction. Soybean isoflavone was found to inhibit hydrogen production from aluminium dust and water. At a soybean isoflavone solution concentration of 2.1 g L⁻¹, a dense protective film resulting from chemical adsorption on the surfaces of the aluminium particles isolated the aluminium particles from water molecules. This film blocked the reaction pathway between the aluminium particles and water to suppress hydrogen generation. This fundamental study addresses the problems of hydrogen fires and explosions in wet dust removal systems for aluminium dust collection and provides a novel, safe and effective method for aluminium dust removal.     

Long Term Effects of Acid Irrigation at the Höglwald on Seepage Water Chemistry and Nutrient Cycling

In order to test the hypothesis of aluminium toxicity induced by acid deposition, an experimental acid irrigation was carried out in a mature Norway spruce stand in Southern Germany (Höglwald). The experiment comprised three plots: no irrigation, irrigation (170 mm a^?1), and acid irrigation with diluted sulphuric acid (pH of 2.6–2.8). During the seven years of acid irrigation (1984–1990) water containing 0.43 mol_c m^?2 a^?1 of protons and sulphate was added with a mean pH of 3.2 (throughfall?+?acid irrigation water) compared to 4.9 (throughfall) on both control plots. Most of the additional proton input was consumed in the organic layer and the upper mineral soil. Acid irrigation resulted in a long lasting elevation of sulphate concentrations in the seepage water. Together with sulphate both aluminium and appreciable amounts of base cations were leached from the main rooting zone. The ratio between base cations (Ca?+?Mg?+?K) and aluminium was 0.79 during acid irrigation and 0.92 on the control. Neither tree growth and nutrition nor the pool of exchangeable cations were affected significantly. We conclude that at this site protection mechanisms against aluminium toxicity exist and that additional base cation runoff can still be compensated without further reduction of the supply of exchangeable base cations in the upper mineral soil.     

Effect of scale on freely propagating flames in aluminum dust clouds

The majority of experimental tests done on combustible dusts are performed in constant volume vessels that have limited or no optical access. Over the years, McGill University has been developing alternative experimental techniques based on direct observation of dust flames, yielding reliable fundamental parameters such as flame burning velocity, temperature and structure. The present work describes two new experimental set-ups allowing direct observation of isobaric and freely propagating dust flames at two sufficiently different scales to test the influence of scale on dust flame phenomena. In the laboratory-scale experiments, a few grams of aluminum powder are dispersed in transparent, 30 cm diameter latex balloons that allow for full visualization of the spherical flame propagation. In the field experiments, about 1 kg of aluminum powder is dispersed by a short pulse of air, forming a conical dust cloud with a total volume of about 5 m³. High-speed digital imaging is used to record the particle dispersal and flame propagation in both configurations. In the small-scale laboratory tests, the measured flame speed is found to be about 2.0 ± 0.2 m/s in fuel-rich aluminium clouds. The burning velocity, calculated by dividing the measured flame speed by the expansion factor deduced from thermodynamic equilibrium calculations, correlates well with the previously measured burning velocity of about 22–24 cm/s from Bunsen dust flames. Flame speeds observed in field experiments with large-scale clouds, however, are found to be much higher, in the range of 12 ± 2 m/s. Estimations are presented that show that the presumably greater role of radiative heat transfer in larger-scale aluminium flames is insufficient to explain the six-fold increase in flame speed. The role of residual large-eddy turbulence, as well as the frozen-turbulence effect leading to large-scale dust concentration fluctuations that cause flame folding, are discussed as two possible sources for the greater flame speed.     

Export efficiency of large projects: The case of aluminium smelters

We draw attention to a number of key factors in the evaluation of major projects, such as smelters, which are highly capital- and energy-intensive as well as export-orientated. The practice of justifying such projects by upvaluing foreign exchange is considered, as is the cost of distortion. Export efficiency is introduced as the key criterion: the efficiency of some recent smelter proposals in Oceania was between 36 and 50 cents in the dollar. A correct power price is essential: hydropower (in contrast with hydroenergy) should be priced as a depletable resource.     

Effect of Al2O3 particle size reduction on aluminium dust explosion

To investigate the effect of Al₂O₃ particle size on an aluminum explosion, the overpressure and flame velocity in a vertical duct were evaluated. The results show that the inhibitory effect of submicron Al₂O₃ is best, while the inhibitory effect increases with increasing inerting ratio. However, the inhibitory effect of micron Al₂O₃ does not increase significantly after the inerting ratio exceeds 40%. For high-concentration aluminum powder, 0.8 μm Al₂O₃ with an inerting ratio less than 20% promotes aluminum explosion. As the inerting ratio increases beyond 20%, however, the overpressure decreases. Furthermore, Al₂O₃ inhibits the formation of the intermediate product AlO and decreases the flame brightness. As the inerting ratio of 0.8 μm Al₂O₃ reaches 50%, the white patches in the flame image disappear. The results of scanning electron microscopy showed that the explosion products agglomerate and some dot-like protrusions appear on the surface of the unburned aluminum particles. The inhibition mechanism was qualitatively investigated. Physical heat absorption is proven to play a limited role. Thermal radiation and chemical inhibition play a key role. The chemical effect mainly influences the surface reaction energy source.     

Evaluation of life cycle inventory data for recycling systems

This paper reviews databases on material recycling (primary as well as secondary production) used in life cycle assessments (LCA) of waste management systems. A total of 366 datasets, from 1980 to 2010 and covering 14 materials, were collected from databases and reports. Totals for CO₂-equivalent emissions were compared to illustrate variations in the data. It was hypothesised that emissions from material production and the recycling industry had decreased over time due to increasing regulation, energy costs and process optimisation, but the reported datasets did not reveal such a general trend. Data representing the same processes varied considerably between databases, and proper background information was hard to obtain, which in turn made it difficult to explain the large differences observed. Those differences between the highest and lowest estimated CO₂ emissions (equivalents) from the primary production of newsprint, HDPE and glass were 238%, 443% and 452%, respectively. For steel and aluminium the differences were 1761% and 235%, respectively. There is a severe lack of data for some recycled materials; for example, only one dataset existed for secondary cardboard. The study shows that the choice of dataset used to represent the environmental load of a material recycling process and credited emissions from the avoided production of virgin materials is crucial for the outcome of an LCA on waste management. Great care and a high degree of transparency are mandatory, but advice on which datasets to use could not be determined from the study. However, from the gathered data, recycling in general showed lower emission of CO₂ per kg material than primary production, so the recycling of materials (considered in this study) is thus beneficial in most cases.     

Tissue accumulation of aluminium is not a predictor of toxicity in the freshwater snail, Lymnaea stagnalis

The amount of toxic metal accumulated by an organism is often taken as an indicator of potential toxicity. We investigated this relationship in the freshwater snail, Lymnaea stagnalis, exposed to 500 μg l⁻¹ Al over 30 days, either alone or in the presence of phosphate (500 μg l⁻¹ P) or a fulvic acid surrogate (FAS; 10 mg l⁻¹ C). Behavioural activity was assessed and tissue accumulation of Al quantified. Lability of Al within the water column was a good predictor of toxicity. FAS increased both Al lability and behavioural dysfunction, whereas phosphate reduced Al lability, and completely abolished Al-induced behavioural toxicity. Tissue accumulation of Al was not linked to toxicity. Higher levels of Al were accumulated in snails exposed to Al + P, compared to those exposed to Al alone, whereas FAS reduced Al accumulation. These findings demonstrate that the degree of tissue accumulation of a metal can be independent of toxicity.     

工业用防锈铝合金板材的超塑性能研究

此文主要对工业牌号防锈铝合金板LF3、LF21进行了组织超塑性研究.结果表明,LF3防锈铝合金,在变形温度为470～510℃、ε_0=(5.56～11.1)×10~(-4)s~(-1)的试验条件下可实现超塑性;LF21防锈铝合金,在变形温度为510～540℃、ε_0=(5.56～8.83)×10~(-4)s~(-1)的试验条件下具有超塑性.     

一种处理熟料造纸厂污水的新方法

研究了采用适量的硫酸铝和一种助凝剂复配，利用絮凝法处理ＣＯＤｃｒ为１０００ｍｇ／ｄｍ＾３以上的废纸造纸污水，实践证明，除污效果明显，处理后的污水可以达到排放标准。