Probabilistic analysis of aluminium production explosion accidents based on a fuzzy Bayesian network

Explosion accidents of molten aluminium in contact with water during aluminium production often occur and may cause injury and death. In this paper, a fuzzy Bayesian network (BN) was employed to probabilistically analyse the explosion accident of molten aluminium in contact with water. A fault tree-Bayesian network (FT-BN) model was established in the cause-effect analysis of the explosion accident, including three processes: electrolysis, molten aluminium transportation and aluminium casting. Fifty-three nodes were proposed in the model to represent the evolution process of the explosion accident from failure causes to consequences. Furthermore, the occurrence probabilities of basic events (BEs) were determined by expert judgement with weighted treatments based on fuzzy theory. By giving certain occurrence probabilities of each BE, the probability of an explosion accident was estimated. Subsequently, importance measures were assessed for each BE, which could reflect the impact on the occurrence of the top event (TE), and the final ranks were provided. The results indicate that using wet ladles and tools, water on the ground, breakage of the tap hole, damage to the casting mould, and leakage of circulating water are five main problems that cause explosion accidents. Safety advice was provided based on the analysis results. This study can help decision makers improve the safety management of aluminium production.     

无机高分子混凝剂的发展与应用

讨论了不同类型无机高分子混凝剂的混凝机理、生产及应用，并指出了新型混凝剂的研制方向．     

Thermolysis of 2,4,6-trichlorophenol chemisorbed on aluminium oxides as example of fly ash mediated surface catalysis reaction in PCDD/PCDF formation

The influence of aluminium cation as a strong electrophilic centre on the thermolysis of chlorophenols chemisorbed on Al(OH)₃ surface was investigated. If thermolysis is carried out at 300 °C the spontaneous rupture of the bond between aluminium and oxygen of phenol takes place in the temperature range of 260–280 °C. The thermolysis of chlorophenoxy aluminium compounds occurs through homolytic and heterolytic bond cleavage. In the case of heterolytic cleavage the leaving chlorophenoxy anion causes a simultaneous formation of the aluminium cation, which is the driving force for the rearrangement of the unstable intermediate. By homolytic cleavage of the Al–O bond the chlorophenoxy radical is formed. The isolation of reaction products of the thermolysis of the system Al(OH)₃/2,4,6-trichlorophenol gave five isomers of dimeric compounds of resonance stabilised 2,4,6-trichlorophenoxy radical. The compounds are stable in nonaqueous, aprotic solution, but they are very sensitive to acid catalysis. They quickly transform into aromatic hydroxydiphenyl ethers. The process of dechlorination and aromatisation of cyclohexadienone dimers gives PCDD/PCDF.     

Aluminium dust explosion risk analysis in metal workings

The aim of this paper is to present a risk analysis method that can be applied to factories where combustible dust is handled, in the form of raw materials, products or by-products, and therefore at risk to explosion. The work was carried out on site: a consistent number of companies that deal with the surface finishing of objects in aluminium through grinding were examined. The aluminium powder produced as a by-product is generally captured by suction plants and then subjected to dry or wet type abatement. In order to provide a rational approach to the risk assessment and frequency estimation, each company was divided into the so-called fields of study; and four risk assessment topics were identified for each field. A brief review of the methods that are available for the consequence magnitude estimation, regarding both the pressure wave and the launching of missiles, is also provided.     

Recycling opportunities in the UK for aluminium-bodied motor cars

The purpose of this paper is to review, and draw attention to, issues raised by the recycling of wrought aluminium from motor cars, even though the time horizon for significant arisings of such aluminium scrap is in the order of 20 years from now. Recycling of specific grades of wrought aluminium will be viable only when a means of positively identifying different types of scrap is available. A solution must be reliable, rapid, and low-cost; probably used in conjunction with a vehicle shredder. Such a system of identification will eliminate the need for costly hand-dismantling and segregation. Simple segregation of cast and wrought alloy will, however, be essential when wrought aluminium from car bodies dominates the scrap arisings. Such segregation will produce two high-value scrap products. The first of which will be similar to the A380 casting alloy specification, maintaining the current supply of this scrap, and the second will be a composite of wrought alloys. These issues are relevant to the aluminium scrap industry, which will have to accommodate future changes in the composition of the scrap it receives, and the motor industry, which may adopt in-house recycling of wrought alloy in order to offset the high purchase cost of aluminium.     

Application of the comet assay and detection of DNA damage in haemocytes of medicinal leech affected by aluminium pollution: A case study

This report describes an investigation of genotoxic effects in medicinal leech (Hirudo verbana) exposed to water and sediment of Lake Njivice (Krk Island, Croatia) contaminated by aluminium compounds. The levels of primary DNA damage in leech haemocytes and loss of DNA integrity caused by acute and chronic exposure to contaminated water and sediment were investigated using the alkaline comet assay. Genotoxic effects induced by acute exposure to contaminants were evaluated on leech haemocytes and blood cells of fish and mouse treated ex vivo. The effects of chronic exposure were assessed on haemocytes sampled from an animal kept under laboratory conditions on contaminated water and sediment for 180 days. The results indicate the DNA damaging potential of aluminium compounds present in an excess amount in tested samples.     

铝型材挤压平模CAD系统的开发

介绍了铝型材挤压平模CAD系统的总体结构和设计要素.该系统以AUTOCAD12.0为图形支撑环境,VISUAL BASIC4.0 FOR WINDOWS作为开发工具,采用交互式设计,完成了从型材图形输入到模具图纸输出的全过程.利用该系统可以进行挤压平模设计的各项计算,通过优化选择,设计出尺寸精确、结构合理的模具.     

Geochemical mapping in Jamaica

A high-precision regional geochemical data base of Jamaica is being developed as a basis for a wide variety of economic and environmental applications. These include pollution studies, resource identification and management, agriculture, land use, and the relationship between geochemistry and the health of crops, animals, and man. The acquisition of analytical data is mainly by instrumental neutron activation analysis using a SLOWPOKE reactor and by energy dispersive X-ray fluorescence. Concentration ranges and means in soil are presented for 31 elements and maps illustrating the distributions of Al, Br, Co, and the -ray intensities are presented as examples. Compared with world averages the levels of many heavy metals in Jamaican soils are found to be relatively high and in the main strongly correlated with bauxite occurrences. The high content of bromine in the soils appears to reflect the impact of sea-spray.     

Leaching of aluminium from cookwares -- a review

Concern over the possible relation between environmental aluminium exposure and Alzheimer's disease has prompted studies of all forms of human intake of this element including that from foods. Aluminium cookware, apart from other sources of dietary aluminium, is considered to be a potential source of this metal to human beings. Various research groups have carried out aluminium leaching experiments with food, beverages and water under different experimental conditions modified by varying the level of pH, chloride, fluoride, citrate, acetate etc. The results reported by different workers show marked discrepancies in levels of leached aluminum. The apparent reason for such discrepancy in levels of aluminum leached can be attributed to factors such as non-systematic and non-uniform experimental designs, non-standard conditions maintained during the experiments and choice of method for aluminium analysis. In order to assess accurately the contribution of aluminium ingestion by human beings through aluminium cookware, the present review emphasises the need of i) standard size aluminium plates obtained from the same lot for one set of experimentations; ii) real life cooking conditions to highlight the role of various complexing species present in food e.g. citrate, oxalate, acetate, tartrate etc.; iii) role of chemistry of aluminium in presence of acidic, basic and neutral cooking medium and iv) strict analytical control in the estimation of aluminium. Results of a systematic study by the authors conducted on the abovementioned lines are also described.     

Study of fluxing in Al refining process by rotary and crucible furnaces

The process used to obtain recycled Al alloys depends on the scrap quality. Rotary furnaces are normally used in Europe as they allow a great productivity and they can process low quality scrap using a salt flux to protect the molten metal from oxidation. In this article, the effect of the quantity of salt on the metal recovery has been experimentally investigated by melting several types of scrap under a mixture of NaCl–KCl–Na₃AlF₆ salts. The quantity of salt has been related to the salt factor (SF), which is the ratio between the non-metallic content in the scrap and the quantity of salt required. The same levels of salt factor have been tested by melting the scrap in rotary and crucible furnaces. The metal recovery increases with the salt content for both furnaces. The results obtained with the different melting processes are comparable because the yield difference is similar considering different salt factors. Crucible furnace gives greater metal recovery but it cannot replace rotary furnace in Al refining industry due to lower melting capacity. However, the results highlight that the optimisation of the Al refining process can be supported by preliminary tests through crucible furnaces reducing the time and material consumptions.