利用Al（OH）3凝胶废渣生产聚合氯化铝（PAC）

介绍了对处理铝材加工含Ａｌ＾３＋的酸性废液过程中产生的二次污染物Ａｌ（ＯＨ）３凝胶废渣的应用。     

液力挤压法制备新型钨合金穿甲弹芯材料技术

采用液力挤压法制备新型钨合金穿甲弹芯材料,较常规钨合金材料变形加工技术相比,其最大优势是仅通过一次变形可使钨合金材料的性能得到大幅度提高。可对现役、在研各口径、各长细比钨合金穿甲弹进行技术改造和移植。为钨合金穿甲弹芯材料的变形加工提供新的有效技术途径。     

纳米磷酸铝合成及对Cr(Ⅵ)的吸附性能应用研究

用固相模板方法，在150C、2h条件下合成纳米磷酸铝，通过XRD、IR、ICP和化学分析进行了表征。TG研究表明，纳米磷酸铝从室温到1000C范围内热稳定性好。并对磷酸铝和纳米磷酸铝对Cr(Ⅵ)的吸附性能进行了研究。结果表明，它们对Cr(Ⅵ)具有良好的吸附性能。     

吸塑模型腔的锌基合金液态模锻

以研制育苗营养钵用吸塑模具型腔为例 ,介绍锌基合金液态模锻这一新工艺。它具有快速、简易、经济等优点 ,而且工艺简单、生产效率高、成本低。它解决了吸塑模具型腔加工的复杂性与降低模具成本和缩短模具周期之间的矛盾     

Aluminum interaction with human brain tau protein phosphorylation by various Kinases

Abstract

Phosphorylation is an indispensable process for energy and signal transduction in biological systems. AlCl₃ at 10 nM to 10 uM range activated in‐vitro [γ‐³²P)ATP phosphorylation of the brain (tau) T protein in both normal human or E.coli expressed T forms; in the presence of the kinases P34, PKP, and PKC. However, higher concentrations of ALCl₃ inhibited the T phosphorylation with P34, PKP, and PKC to a maximum at 1 mM level. AlCl₃ at 100 uM to 500 uM range induced non‐enzymatic phosphorylation of T with γ‐ATP, γ‐GTP, and α‐GTP. AlCl₃ activated histone phosphorylation by P34 in a similar pattern. The hyperphosphorylation of T by Al³⁺ was accompanied by molecular shift and mobility retardation in SDS‐PAGE. This may demonstrate the mechanism of the longterm neurological effect of Al³⁺ in human brain leading to the formation of the neurofibrillary tangles related to Alzeheimer's disease.     

植物铝胁迫发生机制及其内在缓解途径研究进展

本文总结了土壤中铝的存在形式及其化学行为,分析了以针叶人工林为例的诱发植物铝胁迫效应的内外部机制,以及铝胁迫在不同生态水平上对植物生长的影响。比较了环境铝胁迫下,植物体自身缓解环境铝威胁的不同途径。     

Phosphorus transformation under the influence of aluminum,organic carbon,and dissolved oxygen at the water-sediment interface: A simulative study

• The three simulation factors caused various changes in both water and sediment. • Responses to simulations differed with the reported natural lakes and wetlands. • Al has dominant effects on sediment P release control among the three factors. • Adding sediment Al can be effective and safe under the simulated conditions. • Polyphosphates were not generated, while added phytate was rather stable. The effects of sediment aluminum (Al), organic carbon (OC), and dissolved oxygen (DO) on phosphorus (P) transformation, at the water-sediment interface of a eutrophic constructed lake, were investigated via a series of simulative experiments. The above three factors had various influences on dissolved P concentration, water pH, water and surface sediment appearance, and P fractions. Additions of Al had the greatest effect on suppressing P release, and the water pH remained alkaline in the water-sediment system under various OC and DO conditions. No dissolution of the added Al was detected. ³¹P-NMR characterization suggested that OC addition did not promote biological P uptake to polyphosphates under oxic conditions. The simulation result on the added phytate indicated the absence of phytate in the original lake sediment. As compared to the reported natural lakes and wetland, the water-sediment system of the constructed lake responded differently to some simulative conditions. Since Al, OC, and DO can be controlled with engineering methods, the results of this study provide insights for the practical site restorations.     

Enhancement of phosphorus sorption onto light expanded clay aggregates by means of aluminum and iron oxide coatings

Phosphorus (P) loading from non-point or point sources increases the eutrophication risk of natural waters. The functioning of constructed wetlands (CWs) used as natural water treatment systems can be improved by means of additional materials adsorbing soluble P. In this study, light expanded clay aggregates (LECA) and LECA coated with aluminum (Al) oxide (Al-LECA) or iron (Fe) oxide (Fe-LECA) were tested for their efficiency as P sorbents in the pH range 3–8. The oxide coatings duplicated the actual sorption capacity calculated from the sorption isotherms at the P concentration in the equilibrium solution of 20 μg L⁻¹, assumed to be the allowable P level in purified water. In the oxide-coated LECAs the sorption was fast and followed both the first- and second-order Lagergren kinetic models, suggesting that the formation of a binuclear surface complex was feasible. In LECA, sorption was markedly slower and followed the first-order kinetic model, indicating that retention occurred through a monodentate attachment. These findings were in harmony with the degree of P saturation (DPS) of the sorbent surfaces at the highest P addition level (200 μg L⁻¹), DPS being decisively higher for LECA than for the oxide-coated sorbents. Accordingly, at higher pH values the competition by hydroxyl ions diminished the sorption in LECA relatively more than that in the coated sorbents. In agreement with the acidity of Al³⁺ being 100 times lower than that of Fe³⁺, at elevated pH the sorption by Al-LECA proved to be less reversible than that by Fe-LECA. The results provide evidence that in CWs Al-coated sorbents are superior to Fe-coated ones that are also redox-sensitive and may lose their sorption properties in anoxic conditions.     

Optimized processing power and trainability of neural network in numerical modeling of Al Matrix nano composites

In this research, an experimental study of reinforcing alumina nano-particles into the aluminum alloy matrix was implemented to verify the accuracy of modeling results obtained by feed forward neural networks. Artificial neural network combined with numerical technique were used to predict the various parameters of mechanical properties such as hardness, tensile and compressive yield stress, UTS and elongation percentage. Much experimentation were taken to discover a suitable number of hidden neurons, avoid detraction from the trainability and enable feed forward neural networks to solve more complex problems. The predictions were found to be consistent with experimental measurements.     

The impact of monetary liquidity on Chinese aluminum prices

By expanding Frankel and Rose's (2009) theoretical model to consider the interaction of commodity prices with both money liquidity and expectation formation, this paper empirically studies the long-run relationship and short-term dynamics between aluminum prices and money liquidity via Vector autoregressive (VAR) and Impulse Response Function methodologies. Our results show that: (1) a cointegration relationship between money liquidity and Chinese aluminum prices exists, and monetary liquidity positively significantly influences the price over long periods; (2) a structural change has been found during the 2008 Financial Crisis and the change of Chinese monetary policies; and (3) the negative impact of production capacity mechanism on aluminum prices coexists with the positive impact of financial asset returns mechanism, to allow for varied market expectations on aluminum prices within and outside China.