In-depth analysis of aluminum flows in Austria as a basis to increase resource efficiency

Based on the method of material flow analysis (MFA), a static model of Austrian aluminum (Al) flows in 2010 was developed. Extensive data research on Al production, consumption, trade and waste management was conducted and resulted in a detailed model of national Al resources. Data uncertainty was considered in the model based on the application of a rigorous concept for data quality assessment. The model results indicated that the growth of the Austrian “in-use” Al stock amounts to 11 ± 3.1 kg yr⁻¹ cap⁻¹. The total “in-use” Al stock was determined using a bottom-up approach, which produced an estimate of 260 kg Al cap⁻¹. Approximately 7 ± 1 kg of Al yr⁻¹ cap⁻¹ of old scrap was generated in 2010, of which 20% was not recovered because of losses in waste management processes. Quantitatively, approximately 40% of the total scrap input to secondary Al production originated from net imports, highlighting the import dependency of Austrian Al refiners and remelters. Uncertainties in the calculation of recycling indicators for the Austrian Al system with high shares of foreign scrap trade were exemplarily illustrated for the old scrap ratio (OSR) in secondary Al production, resulting in a possible range of OSRs between 0 and 66%. Overall, the detailed MFA in this study provides a basis to identify resource potentials as well as resource losses in the national Al system, and it will serve as a starting point for a dynamic Al model to be developed in the future.     

环氧富锌涂层对AZ91D镁合金的腐蚀防护能力研究

目的研究环氧富锌涂层对AZ91D镁合金的腐蚀防护能力。方法采用机械喷涂法在AZ91D镁合金表面制备一种保护性的环氧富锌涂层。采用电化学阻抗谱(EIS)研究环氧富锌涂层在0.5 mol/L的Na2SO4腐蚀溶液中的电化学腐蚀行为及其对镁合金的腐蚀防护能力。结果浸泡初期,环氧富锌涂层的阻抗谱中只出现一个时间常数,暗示着环氧富锌涂层优异的阻挡层作用;浸泡48 h后,环氧富锌涂层阻抗谱中出现两个时间常数,高频和低频时间常数分别对应环氧富锌涂层中高聚合的介电性质和锌粉的活性溶解;浸泡336 h后,环氧富锌涂层仍具有很高的阻抗模值,表明此时环氧富锌涂层对镁合金仍能提供良好的腐蚀防护。结论环氧富锌涂层在0.5 mol/L Na2SO4腐蚀溶液中能对AZ91D镁合金提供很好的腐蚀防护。     

Fluoride removal by Al, Ti, and Fe hydroxides and coexisting ion effect

Batch experiments were conducted to evaluate fluoride removal by Al,Fe,and Ti-based coagulants and adsorbents,as well as the effects of coexisting ions and formation of aluminum–fluoride complexes on fluoride removal by co-precipitation with alum(Al_2(SO_4)_3·18H_2O).Aluminum sulfate was more efficient than the other coagulants for fluoride removal in the pH range between 6 and 8.Nano-crystalline TiO_2 was more effective for fluoride removal than Al and Fe hydroxides in a pH range of 3–5.Coexisting anions in water decreased the removal of fluoride in the order:phosphate(2.5 mg/L) arsenate(0.1 mg/L) bicarbonate(200 mg/L) sulfate(100 mg/L) = nitrate(100 mg/L) silicate(10 mg/L) at a pH of 6.0.The effect of silicate became more significant at pH 7.0.Calcium and magnesium improved the removal of fluoride.Zeta-potential measurements determined that the adsorption of fluoride shifted the PZC of Al(OH)_3 precipitates from 8.9 to 8.4,indicating the chemical adsorption of fluoride at the surface.The presence of fluoride in solution significantly increased the soluble aluminum concentration at pH 6.5.A Visual MINTEQ modeling study indicated that the increased aluminum solubility was caused by the formation of AlF~(2+),AlF~(+2),and AlF_3complexes.The AlF_x complexes decreased the removal of fluoride during co-precipitation with aluminum sulfate.     

Electrical performance of laser braze-welded aluminum–copper interconnects

The reported investigation is related to laser beam braze-welding technology for dissimilar aluminum–copper interconnects for Li-ion battery assembly. The correlation between the brittle and high-resistivity intermetallic compounds and the electrical contact resistance showed that a thin intermetallic layer is highly desirable. It was proved that highest shear strength and lowest contact resistance can be achieved within the same parameter set which is of particular interest to battery electrical vehicle applications requiring both high mechanical reliability and electrical performance.A study on the weld seam layout further showed that two parallel weld seams with optimized spacing and overlap design provide lowest contact resistance.     

Composition of Aqueous Extracts of Broiler Litter Treated with Aluminum Sulfate,Ferrous Sulfate,Ferric Chloride and Gypsum

More knowledge on the composition of aqueous extracts of broiler litter amended for Water Soluble P (WSP) reduction would help to understand how amendments work. We measured pH, concentrations of Ca, Mg, Fe, Al, Cu, Mn, Zn, Molybdate Reactive P (MRP), and Dissolved Unreactive P (DUP) in water extracts of broiler litter treated with aluminum sulfate (ALS), ferrous sulfate (FES), ferric chloride (FEC), and gypsum (GYP) at 0, 5, 15, and 25% w/w. In order to study the effects of acidification, the same properties were measured in aqueous extracts of broiler litter suspensions that were titrated to end-points 3, 4, or 6 with 0.5N HCl. Concentrations of MRP, DUP, Ca and Mg, were 61%, 53%, 3.8 times, and 2.6 times greater in extracts from suspensions acidified to pH 6 than at the original pH of 8.9. ALS, FES, and FEC reduced pH, and showed similar effects on WSP concentrations, which were greater than with GYP. The magnitude of the reductions in WSP by ALS, FES, and FEC is uncertain because the actual amount of WSP immobilized cannot be determined. This is because of two opposite effects: 1) Through adsorption, soluble aluminum and iron remove phosphates from solution, and 2) Through acidification, iron and aluminum compounds release phosphates to solution.     

Binding of aluminum to human serum transferrin,human serum albumin and rat serum proteins

Abstract

Human serum transferrin (HSTF), human serum albumin (HSA) and rat serum were compared for their interaction with AlCl₃ , in a Tris‐HCl buffer solutions (pH 7.4). The AlCl₃ was tested in series of concentrations in the range of 50 μM up to 500 μM . HSTF, HSA and their 1:1 mixture and rat serum were incubated at 37°C with series of AlCl₃ concentrations. The protein profile of the incubated solutions were compared to control using SDS‐PAGE and FPLC tests. The results indicated that HSTF was more specifically responsive to AlCl₃showing a characteristic increase in its UV absorption, peak and area dimensions. Simultaneously, HSA was less affected, but it showed a significant shift with an increase in molecular weight accompanied with a change in its profile. The respective bands of transferrin and albumin in rat serum behaved similarly. The SDS‐PAGE and FPLC data coincided and confirmed the preferential affinity of HSTF to bind with Al³⁺ . These results support the suggestion of using HSTF for monitoring levels of Al³⁺ in human blood samples of exposed population. The importance of further developing such a biomarker is the increased demand for early detection of the hazardous levels of Al³⁺ in relation to its long term neurotoxic adverse effects.     

Experimental determination of dust cloud combustion parameters of α-AlH3 powder in its charged and fully discharged states for H2 storage applications

This study discusses results of an experimental program for determination of dust cloud combustion parameters of charged and fully discharged states of metastable alane (aluminum hydride, α-AlH₃ polymorph) powder in air. The measured characterization parameters include: maximum deflagration pressure rise (ΔP_MAX), maximum rate of pressure rise (dP/dt)_MAX, minimum ignition temperature (T_C), minimum explosible concentration (MEC), and minimum ignition energy (MIE). These measured values are used for calculating the associated explosion severity (ES) index, and volume-normalized maximum rate of pressure rise (K_St). The experimental results show values of MEC and T_C of fully discharged alane to be greater than those of the charged alane but measured MIE values are about the same. Moreover, the results show higher reactivity of fully discharged alane dust cloud in air compared to its charged state. For example, ES and K_St of discharged alane dust cloud in air are about 300% and 35% greater, respectively, than ES and K_St of charged alane dust. The higher air reactivity of fully-discharged (primarily Al powder) dust cloud compared to its charged state can be attributed to the higher surface energy (J/m²) of Al compared to that of α-AlH₃. These experimental insights have safety implications in postulated risk scenarios involving light-duty vehicles powered by PEM fuel cells. The core insights and critical data provided by this contribution are useful for supporting development and promulgation of hydrogen safety standards and augmenting property databases of hydrogen storage materials.     

氧化铝表面处理对吸附腐殖酸的影响

采用酸、碱和金属盐表面修饰处理,影响氧化铝表面结构和成份分布,以达到提高吸附性能的目的。研究表明,经酸处理和酸性条件下的钙镁修饰处理的氧化铝,其对腐殖酸的吸附能力比Al-500分别提高32.3％和23.8％。同时,就改性氧化铝去除腐殖酸的影响条件、动力学、热力学性能进行了讨论。     

铝的生物毒性及其防治策略

铝是重要的金属元素,它的广泛应用导致了水体,土壤以及各种水生物,动植物体内残余铝含量不断升高,直接或间接地危害到人体身心健康,威胁着人类的生存和发展。     

铸造铝合金材料自然环境试验研究

选用2种铝合金材料(ZL114B、ZL102A)在铸造状态下通过自然 环境试验研究,得出铸造铝合金材料在不同防护方式和不同环境条 件下其性能变化结果。