Modeling carbon sequestration under zero tillage at the regional scale. I. The effect of soil erosion

Zero tillage is recognized as a potential measure to sequester carbon dioxide in soils and to reduce CO₂ emissions from arable lands. An up-scaling approach of the output of the Environmental Policy Integrated Climate (EPIC) model with the information system SLISYS-BW has been used to estimate the CO₂-mitigation potential in the state of Baden-Württemberg (SW-Germany). The state territory of 35,742 km² is subdivided into eight agro-ecological zones (AEZ), which have been further subdivided into a total of 3976 spatial response units. Annual CO₂-mitigation rates where estimated from the changes in soil organic carbon content comparing 30 years simulations under conventional and zero tillage. Special attention was given to the influence of tillage practices on the losses of organic carbon through soil erosion, and consequently on the calculation of CO₂-mitigation rates. Under conventional tillage, mean carbon losses through erosion in the AEZ were estimated to be up to 0.45 Mg C ha⁻¹ a⁻¹. The apparent CO₂-mitigation rate for the conversion from conventional to zero tillage ranges from 0.08 to 1.82 Mg C ha⁻¹ a⁻¹ in the eight AEZ, if the carbon losses through soil erosion are included in the calculations. However, the higher carbon losses under conventional tillage compared to zero tillage are composed of both, losses through enhanced CO₂ emissions, and losses through intensified soil erosion. The adjusted net CO₂-mitigation rates of zero tillage, subtracting the reduced carbon losses through soil erosion, are between 0.07 and 1.27 Mg C ha⁻¹ a⁻¹ and the estimated net mitigation rate for the entire state amounts to 285 Gg C a⁻¹. This equals to 1045 Gg CO₂-equivalents per year with the cropping patterns in the reference year 2000. The results call attention to the necessity to revise those estimation methods for CO₂-mitigation which are exclusively or predominantly based on the measurements of differential changes in total soil organic carbon without taking into account the tillage effects on carbon losses through soil erosion.     

广州市区公交车站PM_(2.5)与CO暴露水平研究

用便携式颗粒物浓度测定仪(DustTrak Model8520)和CO测定仪(Q-Trak Model8551),于2008年9月至2009年1月对广州市区11个代表性公交车站的PM2.5和CO暴露水平进行了测定。结果表明,公交车站7:00～19:00时间段PM2.5的平均浓度范围为206～348μg/m3,总体均值达288μg/m3,显示公交车站PM2.5污染问题突出;CO平均浓度范围1.5～4.0mg/m3,总体平均2.8mg/m3,有六个站点平均浓度超过了我国环境空气质量标准限值(4.0mg/m3或3.2mg/m3)。大多数站点工作日与非工作日PM2.5与CO水平差异不大,部分站点则受车流量和客流量变化影响呈现差异。同一站点PM2.5日变化特征不如CO明显,一次污染物CO变化受交通高峰影响呈双峰特征,而PM2.5水平影响因素复杂,一般白天较低,夜晚21:00出现峰值。不同站点CO与车流量未见显著相关性,表明车流量并不是决定公交站点CO水平的唯一因素,而扩散条件及公交车排放可能也是重要影响因素;与CO不同,不同站点PM2.5与车流量表现出显著相关(p0.05),可能侧面反映路面扬尘对公交车站PM2.5水平的影响和贡献。     

Effects of increased wood energy consumption on carbon storage in forests of the United States

Large but feasible increases that have been projected for the production of wood energy in the United States can be expected to significantly alter the current carbon storage patterns in US forest vegetation. The 1976 net wood increment left after forest cutting equals about 136 × 10⁶ tons of carbon/year, with about 60% of the increment found in merchantable trees, and the remainder in nonmerchantable components.Achieving 5–10 quads of wood energy beyond 1976 levels by the year 2010 can significantly change current carbon storage patterns with the magnitude of change dependent on the extent of residue harvest to meet energy goals, and the rate of future forest growth. Complete loss of the apparent net wood increment is a possible outcome.Although the future growth and harvest situation cannot be known now, a range of possible scenarios suggests that US forests in the year 2010 will store much less carbon than today, thus significantly changing their role in the global carbon cycle.     

Energy and carbon balances of wood cascade chains

In this study we analyze the energy and carbon balances of various cascade chains for recovered wood lumber. Post-recovery options include reuse as lumber, reprocessing as particleboard, pulping to form paper products, and burning for energy recovery. We compare energy and carbon balances of chains of cascaded products to the balances of products obtained from virgin wood fiber or from non-wood material. We describe and quantify several mechanisms through which cascading can affect the energy and carbon balances: direct cascade effects due to different properties and logistics of virgin and recovered materials, substitution effects due to the reduced demand for non-wood materials when wood is cascaded, and land use effects due to alternative possible land uses when less timber harvest is needed because of wood cascading. In some analyses we assume the forest is a limiting resource, and in others we include a fixed amount of forest land from which biomass can be harvested for use as material or biofuel. Energy and carbon balances take into account manufacturing processes, recovery and transportation energy, material recovery losses, and forest processes. We find that land use effects have the greatest impact on energy and carbon balances, followed by substitution effects, while direct cascade effects are relatively minor.     

黄酒中尿素的测定

二乙酰－肟分光光度法是测定黄酒等样品中尿素含量的一种快速、灵敏、简便的方法。样品中的尿素与显色试剂在沸水浴中发色１０￣１５ｍｉｎ后比色测定，显色的线性范围在０￣９μｇ尿素之间。测得的结果中包含了瓜氨酸的含量。样品中酒精和葡萄糖的存在不干扰测定。以标准加入法进行定量，从而使该方法的回收率和重现性大大提高，可满足一般痕量分析的要求。     

Developing sinks for CO<Subscript>2</Subscript> through forestation of temperate coastal barriers: an environmental business

Since the 1940s, some sectors of the sand dune barriers of Buenos Aires Province have been forested to fix the sand in the neighborhoods of resort villages. Man took advantage of the maritime climate and the shallow groundwater to introduce pine forests. Today, these forests reach more than 20 m in height and have developed soils of more than 0.05 m in thickness on former arid sands. Field data were referred to Landsat (TM) composite and Normalized Difference of Vegetation Index, NDVI, images to calculate forest density and covered area. Considering published tables of wood density for each species, the amount of total carbon storage was estimated on 318 t C ha^-1 (Mg=10⁶ g) in biomass and 86 t C ha^-1 in soils. The three areas analyzed at Miramar, Necochea and Claromecó have captured 658,868 t of carbon in the last 50 years. It is estimated that 150,000,000 t C could be sequestered within temperate dune barriers of Argentina, Uruguay and Brazil. Besides this ecological point of view, there is an important socio-economic factor that cannot be excluded.Presented at and revised subsequent to the 4th LOICZ Open Science Meeting, Bahía Blanca, Argentina. October 1999.     

Monitoring Forest Carbon Sequestration with Remote Sensing and Carbon Cycle Modeling

Sources and sinks of carbon associated with forests depend strongly on the management regime and spatial patterns in potential productivity. Satellite remote sensing can provide spatially explicit information on land cover, stand-age class, and harvesting. Carbon-cycle process models coupled to regional climate databases can provide information on potential rates of production and related rates of decomposition. The integration of remote sensing and modeling thus produces spatially explicit information on carbon storage and flux. This integrated approach was employed to compare carbon flux for the period 1992–1997 over two 165-km² areas in western Oregon. The Coast Range study area was predominately private land managed for timber production, whereas the West Cascades study area was predominantly public land that was less productive but experienced little harvesting in the 1990s. In the Coast Range area, 17% of the land base was harvested between 1991 and 2000. Much of the area was in relatively young, productive-age classes that simulations indicate are a carbon sink. Mean annual harvest removals from the Coast Range were greater than mean annual net ecosystem production. On the West Cascades study area, a relatively small proportion (< 1%) of the land was harvested and the area as a whole was accumulating carbon. The spatially and temporally explicit nature of this approach permits identification of mechanisms underlying land base carbon flux. Published online     

Ambient carbon monoxide monitoring and instrumentation

The information presented in this paper is directed to air pollution engineers who are concerned with monitoring Carbon Monoxide. This paper evaluates systems for CO sampling under conditions where the receptor is located at intersections within 40 meters of the road edge. Non-Dispersive Infrared and electrochemical analysis techniques are used in conjunction with continuous recording, continuous bag sampling, and meter readings at 5 second intervals. The relative accuracy of each system is examined and the conditions for which each system is best suited are described.     

炭催化剂吸附剂标准物质的研制

本文介绍了炭催化剂吸附剂标准物质的研制过程。对标准物质的制备技术、均匀性检验、稳定性考察及定值和不确定度进行了逐项分析。采用活性炭浸渍、煅烧技术制得炭催化剂吸附剂标准物质。试验结果表明,该标准物质定值结果准确,均匀性、稳定性良好。铜含量的标准值为11．06％,扩展不确定度为0．13％。