生物接触氧化+植物一体化装置处理小城镇污水试验研究

利用“生物接触氧化+植物”一体化装置处理城镇污水,试验最终选用悬浮多面球作填料,采用射流曝气,控制进水流量为0.45 m3/h,进水浓度为COD 63～467 mg/L、NH3-N 11.21～52.7 mg/L、TN 28.6 ～63.5mg/L和TP １.1～6.42 mg/L时,COD、NH3-N、TN和TP的去除率分别达到88％、86％、70％、60％以上,出水COD≤30 mg/L,NH3-N≤5 mg/L、TN≤13 mg/L、TP≤0.5 mg/L.水质优于《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准,具有较好的工程应用前景.     

卫星遥感技术在空气点位布设评估工作中的应用研究

以苏州市为例,利用2013-2014年MODIS高分辨率大气气溶胶卫星遥感产品对国控空气监测点位布设调整方案进行评估论证,通过提取2 km和5km半径范围的PM2.5遥感观测数据,与现有国控布设点位的地面监测数据进行相关性分析后,确定卫星产品用于评估验证是可靠的;通过不同天气场下PM2.5月均值浓度分布的比较,表明调整后空气点位布设具有很好的代表性.     

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis(f MAP) of corn stover for bio-oil production was investigated in the presence of microwave absorbent(Si C) and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1:100 to 1:20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.     

高级氧化技术降解含氮除草剂的研究进展

目前,含氮除草剂已在全球范围内得到广泛使用,随着其不断的排入水体,会对水体生态环境和人体健康造成严重危害。介绍了几种主要的高级氧化技术降解含氮除草剂的机理,并综述了国内外利用高级氧化技术在降解含氮除草剂领域所取得的研究进展,为开发新的降解含氮除草剂技术提供参考。     

湿式电除尘器用于生物质气化燃气除尘的实验研究

生物质粉尘是生物质气化燃气中主要的杂质之一,其清除效果对生物质气化发电机组的安全运行有着重要的影响。以湿式电除尘装置作为试验平台,研究了生物质粉尘的特性和不同影响因素下湿式电除尘器的除尘效率,并对干法、湿法除尘效率进行对比。研究结果表明:生物质粉尘主要含C、O、Mg、Al、Si、K、Ca、Fe等元素,中位径为26.05μm。在相同条件下,除尘效率随着水压的增大而逐渐增大,当增加到0.4 MPa以后,无较大变化,除尘效率随着电场风速、焦油浓度的增加而减少,在洗涤水中添加少量的碱液有利于除尘。采用极配型式为RS二刺芒刺线配480C型板,当水压为0.4 MPa、电场风速为1.0 m/s,除尘效率可达99.21%。     

湿法烟气脱硫关键影响因素及新型单塔双循环技术

分析了石灰石-石膏湿法烟气脱硫(LGWFGD)技术的关键影响因素:液气比、浆液pH值、浆液密度的影响规律,发现在浆液pH值和浆液密度的选择时不能同时满足高脱硫效率和高石膏品质的要求。为解决这一矛盾,提出一种新型的单塔双循环技术,在两个相对独立的浆液循环系统中可以分别调节浆液pH值和浆液密度,使得高脱硫效率和高石膏品质的需求同时得到满足。     

Advanced treatment of wet-spun acrylic fiber manufacturing wastewater using three-dimensional electrochemical oxidation

A three-dimensional electrochemical oxidation(3D-EC) reactor with introduction of activated carbon(AC) as particle micro-electrodes was applied for the advanced treatment of secondary wastewater effluent of a wet-spun acrylic fiber manufacturing plant. Under the optimized conditions(current density of 500 A/m~2, circulation rate of 5 mL/min, AC dosage of 50 g, and chloride concentration of 1.0 g/L), the average removal efficiencies of chemical oxygen demand(COD_(cr)), NH3–N, total organic carbon(TOC), and ultraviolet absorption at 254 nm(UV_(254)) of the 3D-EC reactor were 64.5%, 60.8%, 46.4%, and 64.8%, respectively; while the corresponding effluent concentrations of COD_(cr), NH_3–N, TOC, and UV_(254) were 76.6, 20.1, and42.5 mg/L, and 0.08 Abs/cm, respectively. The effluent concentration of COD_(cr) was less than 100 mg/L, which showed that the treated wastewater satisfied the demand of the integrated wastewater discharge standard(GB 8978-1996). The 3D-EC process remarkably improved the treatment efficiencies with synergistic effects for COD_(cr), NH_3–N, TOC, and UV_(254) during the stable stage of 44.5%, 38.8%, 27.2%, and 10.9%, respectively, as compared with the sum of the efficiencies of a two-dimensional electrochemical oxidation(2D-EC) reactor and an AC adsorption process, which was ascribed to the numerous micro-electrodes of AC in the 3D-EC reactor. Gas chromatography mass spectrometry(GC–MS) analysis revealed that electrochemical treatment did not generate more toxic organics, and it was proved that the increase in acute biotoxicity was caused primarily by the production of free chlorine.     

成都市PM10对大气辐射环境的影响

为研究城市PM₁₀对大气辐射环境的影响,利用2013年6月1日—2014年5月31日成都市ρ(PM₁₀)和空气吸收剂量率的逐日监测数据,采用DCCA(去趋势互相关分析)法对二者的相关性进行分析. 结果表明:在1 a的时间尺度上,成都市ρ(PM₁₀)与空气吸收剂量率之间存在显著的正相关性(标度指数为0.928),并且这种正相关性具有长期、持续的特征,但相关性的强度却随时间以幂函数形式缓慢衰减. 冬夏两季ρ(PM₁₀)与空气吸收剂量率的相关性存在显著差异. 在冬季重度灰霾期间,二者DCCA标度指数为0.968,说明高ρ(PM₁₀)已对城市大气辐射环境产生了影响;而夏季二者的DCCA曲线分为两段,标度指数分别为0.579、1.519,折点位置对应的特征时间尺度约为2个月,推测这与当地夏季降雨的时间分布模式有关. 研究表明,在当前灰霾日益频发的背景下,需要重视城市重度灰霾对城市大气辐射环境造成的影响.      

航空器碳排放扩散模型研究及减碳效果分析

探索、研究有效的机场减碳方法,对我国民用机场的绿色可持续发展、改善机场周边大气环境等具有十分重要的现实意义和长远意义。文章首先分析机场内碳排放源头,研究根据机场内碳排放污染物的特点,结合高斯高价连续点源扩散模式,推导分析航空器在近地面的扩散公式;其次采用不同的下滑角在3°下滑角和4°下滑角下,比较分析碳排放当量值和一氧化碳扩散分布情况并分析整体碳排放量变化趋势,研究监测点或敏感点浓度值等值线分布特点、占标率变化和影响范围等指标,分析浓度值对周边社区居民的影响程度;计算结果表明,增大下滑角可以有效地减少碳排放量。     

热解析-脉冲低温等离子体集成系统脱汞研究

热解析-脉冲低温等离子体集成处理系统是专门针对典型含汞废物安全处置而开发的,可以同时有效控制汞等多种复合气体污染物。通过检测热解炉后烟气中和等离子体反应器入口、出口气体中Hg0和Hg2+浓度,研究汞的价态转化及添加剂对脱汞效果的影响。结果表明:热解烟气中Hg2+/HgT为17%~45%,Hg0/HgT为55%~83%,热解温度主要影响汞价态分布,WMC添加量主要影响汞浓度值;加入添加剂会促进汞的脱除,但添加剂过量不利于汞的氧化;热解炉中添加50 g WMC和5 g升华硫添加剂时,反应器内Hg0氧化率和总汞损失率分别可达55%和42%。该研究可以为探索新型含汞废物处置工艺,实现含汞废物深度净化提供新思路。