水泥工业大气污染与防治的几个问题

对不同类型水泥窑的ＳＯ２及ＮＯｘ污染与防治进行讨论；指出水泥厂粉尘污染监控及收尘设备选用方面的问题。     

关于卫生防护距离问题的探讨

本文通过水泥厂粉尘卫生防护距离的计算实例，比较、分析了国标推荐的两种计算方法的结果．表明ＧＢ／Ｔ１３２０１－９１计算较ＧＢ３８４０－８３结果偏高．进一步分析说明，ＧＢ３８４０－８３方法缺点在于当污染源等效半径超过２００ｍ时，缺少最大防护距离与规化源强间的对应数据．而ＧＢ／Ｔ１３２０１－９１方法的缺点在于未考虑污染源与居住区的空间关系．     

袋式除尘器在水泥立窑烟尘治理中的应用比较

通过分析和比较低压脉；中袋式除尘器与反吹风袋式除尘器在水泥机立窑烟尘治理中的应用．提出两种袋式除尘器的适用特点，并对袋式除尘器在实际治理过程中遇到的问题给出解决办法。     

低温余热发电技术在新型干法水泥生产线的应用

常州盘固水泥有限公司在新建4 500t·d-1水泥熟料生产线的同时,配套建设了低温余热发电,项目建成后,吨水泥能耗下降11%,窑头烟气粉尘削减量为2%,年增直接经济效益2 603万元,真正实现了节能减排增效的目标.     

水泥企业清洁生产评估体系研究

针对我国中小水泥企业立窑生产工艺现状，提出一套简洁实用，操作性较强的清洁生产评估体系，通过对企业现状和基本工艺数据的采集，分析企业在不同方面的清洁生产潜力，明确企业的国内外地位，为企业领导的决策提供依据。     

高强度埋纱绿色包装袋纸的开发应用

阐述了高强度埋纱绿色包装袋纸是纸/塑复合或塑/塑复膜的污染环境包装材料的替代产品，生产流水线由5项专利技术为基础构成，生产原料来源充足，体现资源循环利用，生产企业经济效益显著，产品具有撕裂度，抗张强度高，抗水防潮，耐热，牢固度好，破包率低，指出产品可为国家节约大批木材，对保护森林资源贡献巨大，产品生产过程中不对环境造成污染。     

磷石膏的改性及其在水泥生产中的应用

研究了磷石膏的改性方法及改性磷石膏在水泥生产中的应用，结果表明，通过改性，可将磷石膏中对水泥有害的杂质转化为难溶性，并能改善磷石膏中硫酸钙的溶解性能，改性磷石膏可以替代天然石膏用于水泥生产。     

Environmental and economic aspects of production and utilization of RDF as alternative fuel in cement plants: A case study of Metro Vancouver Waste Management

Municipal solid waste (MSW) disposal and management is one of the most significant challenges faced by urban communities around the world. Municipal solid waste management (MSWM) over the years has utilized many sophisticated technologies and smart strategies. Municipalities worldwide have pursued numerous initiatives to reduce the environmental burden of the MSW treatment strategies. One of the most beneficial MSWM strategies is the thermal treatment or energy recovery to obtain cleaner renewable energy from waste. Among many waste-to-energy strategies, refuse-derived fuel (RDF) is a solid recovered fuel that can be used as a substitute for conventional fossil fuel. The scope of this study is to investigate the feasibility of RDF production with MSW generated in Metro Vancouver, for co-processing in two cement kilns in the region. This study investigates environmental impacts and benefits and economic costs and profits of RDF production. In addition, RDF utilization as an alternative fuel in cement kilns has been assessed. Cement manufacturing has been selected as one of the most environmentally challenged industries and as a potential destination for RDF to replace a portion of conventional fossil fuels with less energy-intensive fuel. A comprehensive environmental assessment is conducted using a life cycle assessment (LCA) approach. In addition, cost–benefit analysis (CBA) has been carried out to study the economic factors. This research confirmed that RDF production and use in cement kilns can be environmentally and economically viable solution for Metro Vancouver.     

Metals distribution in soils around the cement factory in southern Jordan

Thirty one soil samples were collected from south Jordan around the cement factory in Qadissiya area. The samples were obtained at two depths, 0-10 cm and 10-20 cm and were analyzed by atomic absorption spectrophotometery for Pb, Zn, Cd, Fe, Cu and Cr. Physicochemical factors believed to affect their mobility of metals in soil of the study area were examined such as; pH, TOM, CaCO3, CEC and conductivity. The relatively high concentrations of lead, zinc and cadmium in the soil samples of the investigated area were related to anthropogenic sources such as cement industry, agriculture activities and traffic emissions. It was found that the lead, zinc and cadmium have the highest level in area close to the cement factory, while the concentration of chromium was low. This study indicate that all of the metals are concentrated on the surface soil, and decreased in the lower part of the soil, this due to reflects their mobility and physical properties of soil and its alkaline pH values. The use of factor analysis showed that anthropogenic activities seem to be the responsible source of pollution for metals in urban soils.