Degradation of ethylenethiourea pesticide metabolite from water by photocatalytic processes

In this study, photocatalytic (photo-Fenton and H₂O₂/UV) and dark Fenton processes were used to remove ethylenethiourea (ETU) from water. The experiments were conducted in a photo-reactor with an 80 W mercury vapor lamp. The mineralization of ETU was determined by total organic carbon analysis, and ETU degradation was qualitatively monitored by the reduction of UV absorbance at 232 nm. A higher mineralization efficiency was obtained by using the photo-peroxidation process (UV/H₂O₂). Approximately 77% of ETU was mineralized within 120 min of the reaction using [H₂O₂]₀ = 400 mg L^?1. The photo-Fenton process mineralized 70% of the ETU with [H₂O₂]₀ = 800 mg L^?1 and [Fe²⁺] = 400 mg L^?1, and there is evidence that hydrogen peroxide was the limiting reagent in the reaction because it was rapidly consumed. Moreover, increasing the concentration of H₂O₂ from 800 mg L^?1 to 1200 mg L^?1 did not enhance the degradation of ETU. Kinetics studies revealed that the pseudo-second-order model best fit the experimental conditions. The k values for the UV/H₂O₂ and photo-Fenton processes were determined to be 6.2 × 10^?4 mg L^?1 min^?1 and 7.7 × 10^?4 mg L^?1 min^?1, respectively. The mineralization of ETU in the absence of hydrogen peroxide has led to the conclusion that ETU transformation products are susceptible to photolysis by UV light. These are promising results for further research. The processes that were investigated can be used to remove pesticide metabolites from drinking water sources and wastewater in developing countries.     

Dose transfer of Bacillus thuringiensis from cabbage to the diamondback moth: A graphical simulator

Abstract

The application of agrichemicals is a highly inefficient process and one of the main causes of the environmental and health risks currently associated with pesticide usage. Efforts to mitigate this inefficiency have largely been unsuccessful, due principally to the poor understanding of the processes involved in the spray application of pesticides, from atomization to biological effect. A generalized model of the application system for pesticides from atomization to biological result is described in this overview. The model allows the investigation of the biological consequences of altering the application parameters for the bacterial insecticide Bacillus thuringiensis when used against the diamondback moth (Plutella xylostella L.) with cabbage as the substrate. Parameters input into the model include the in‐flight droplet size frequency distribution of the spray cloud, spatial distribution of the deposit, spread and subsequent environmental degradation of the deposit, and behavioral and toxicological effects.

It is hoped that such a modelling approach can afford insights into the application process, and, through a better understanding of the inefficient but still highly effective hydraulic application systems used worldwide, reduce that inefficiency to tolerable levels.     

The growth and Cu and Zn uptake of pakchois (Brassica chinesis L.) in an acidic soil as affected by chicken or pig manure

In a pot experiment, pig manure (PM) and chicken manure (CM) were applied to an acidic soil at application rates of 2%, 4% and 8% (W/W) to evaluate their effects on the growth, Cu and Zn uptake and transfer of five cultivars of pakchoi (Brassica chinesis L.). The results showed that alkaline manures significantly increased the biomass of pakchois, and also pH and electrical conductivity of the soil. Both 0.01 M CaCl₂ and 1.0 M NH₄NO₃ salt solutions predict the Zn transfer from soil to pakchois well, but not for Cu. For the cultivar Siyueman, the transfer factors of Cu (or Zn) in the PM treatments were higher than that in the CM treatments. In our experiment the Cu and Zn concentrations in pakchois did not exceed the Chinese Food Hygiene Standard, but more attention should be paid to heavy metals risk on pakchois at lower soil pH and salt impairment by manures application.     

基于密相半干法脱硫工艺的生石灰消化及改性

以某公司生产的生石灰作为脱硫剂,密相半干法脱硫工艺在某炼铁厂烧结烟气脱硫工程的应用为例,对生石灰的消化反应和调质改性进行实验,考察其满足脱硫要求的最佳消化条件和烧结机头灰作为改性剂的比重。实验表明,当水灰比在1.5～1.7、生石灰粒径在200μm以下、消化温度在55℃左右、搅拌轴转速在15～25 r/min的范围内,可以保证生石灰有最佳的转化率,烧结机头灰占比重的5%时为最佳改性剂量;同时对实验的工程运行成本和脱硫效果进行分析,使用自制改性脱硫剂即可以节约运行成本和水电资源,又能提高脱硫效果,为脱硫设备的长期稳定运行提供了可靠依据。     

叠式空气隙膜蒸馏组件膜污染实验研究

采用一种具有旋流结构的多层层叠式空气隙膜蒸馏膜组件,以20 g/L氯化钠盐水为热工质,考察在70℃条件下膜污染情况,实验结果表明,一个周期的连续运行和间歇性操作膜表面在高温下较快进入膜污染,8个周期后膜通量下降为初始通量的42%。膜表面有大量黄色附着物,电镜SEM分析显示,膜表面被不均匀堆积的颗粒状污染物及长方体结晶物覆盖,能谱EDS分析,污染物有极少量NaCl结晶的Na、Cl元素,还有O、C、Mg、Cu和Fe等元素。污染膜经5%盐酸溶液清洗后无机垢沉淀被去除,表观效果较好。     

不同纳米修复剂对污染土壤中胡萝卜吸收、转运Cd的影响

通过盆栽实验研究不同纳米修复剂(羟基磷灰石HAP、赤泥RM、Fe3O4、胡敏酸-Fe3O4)对2种不同污染土壤Cd吸收、转运的影响。结果表明,上述纳米修复剂均可显著增加胡萝卜植株生物量,显著提高植株Cd胁迫的耐受指数;不同土壤施用不同纳米修复剂均显著降低胡萝卜植株Cd的含量,并且随着修复剂施加浓度的增加而显著降低;与对照相比,植株茎叶Cd含量最大降低达78.8%,根中Cd的含量最大降低67.8%;添加不同修复剂能不同程度地降低了土壤中Cd的转运系数和富集系数,这可能与施用不同纳米修复剂促进了土壤中非残留态Cd向残留态Cd的转化有关,总体而言,不同纳米型修复剂对降低Cd的有效性顺序为:RM～HAP>胡敏酸-Fe3O4>Fe3O4。     

密相半干法低温同时脱硫脱硝影响因素

针对90~160℃的低温条件下,SO₂对钙基吸收剂吸收NO_x的影响进行了实验研究,分析了烟气温度T、含氧率、含湿量等对SO₂促进钙基吸收剂吸收NO_x的影响。实验结果表明,当烟气中SO₂浓度的升高可促进钙基吸收剂对NO_x的吸收;同时,维持反应系统在9.2%的含湿量;保证烟气温度在结露点以上,使系统在90~100℃的温度区间;控制系统漏风率,防止含氧率的升高;保证前端电除尘效率的同时,将一部分电除尘捕集到的灰尘作为钙基脱硫剂的添加剂,并使之参与脱硫反应器内的钙基吸收剂循环过程中;可较多地脱除烟气中的污染物质。     

臭氧微气泡深度处理染料废水生化出水

采用臭氧氧化法对某厂染料废水生化出水进行深度处理,考察了废水初始pH值和臭氧气泡大小对废水处理效果的影响,研究了臭氧微气泡对气液传质的影响。结果表明,在pH 2.5~11范围内,废水初始pH值越大,处理效果越好;加载微孔膜片后,臭氧气泡粒径变小,增大了臭氧的传质比表面积,延长了臭氧气泡在反应柱内的停留时间,强化了传质效果,处理废水的臭氧利用率可增大10%~30%,强化了臭氧氧化作用。加载5 μm孔径的膜片相比无膜片的情况,COD去除率提高了近30%,TOC去除率提高了16%。     

零价铁催化过二硫酸盐降解苯胺

采用Fe⁰催化过二硫酸钠（PS）降解水中苯胺（AN）。在Fe⁰-PS体系中,Fe⁰在酸性条件下被氧化生成Fe²⁺,Fe²⁺可以催化PS产生强氧化性的SO₄^#x02022;-,发生类Fenton试剂氧化反应,从而降解AN。实验结果表明,在PS加入量为6.0mmol/L、Fe⁰加入量为35.7mmol/L、反应时间为120min的条件下,AN降解率可达81.4%,TOC去除率达52.6%,一级反应速率常数为0.03819min^-1。     

Fenton法制备污泥基活性炭及其性能表征

污泥基活性炭孔隙率低下是污泥资源化利用的主要制约因素,而Fenton法预处理污泥,可有效改善活性炭性质。通过考察H2O2投加量、H2O2/Fe2+、活化pH以及炭化条件等参数,确定了最佳污泥基活性炭制备条件:H2O2投加量为5%(质量分数),H2O2/Fe2+为5∶1(质量比),活化pH为3,活化时间为2.0h,污泥含固率为1.0%(质量分数),炭化温度为600℃,炭化时间为2.0h,炭化升温速率为10℃/min。此时,得到的污泥基活性炭吸附碘值为340mg/g,比表面积为353.563m2/g,孔容积为0.238cm3/g,微孔容积为0.095cm3/g。该活性炭对阳离子和阴离子染料(亚甲基蓝和甲基橙)具有良好的吸附性能,结果表明,对亚甲基蓝和甲基橙的吸附更符合Langmuir方程,且其饱和吸附量分别为71.53、57.73mg/g。对吸附动力学的拟合结果表明,该吸附更符合二级动力学方程。