Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.     

南京市农用地土壤中重金属形态特征分析

以南京市农用地土壤为研究对象,采用顺序提取的方法对Cu、Zn、Pb、Cd做化学形态分析,了解不同元素各形态下空间赋存的含量与占比。结果表明,在农用地土壤中,上述4种金属元素所赋存的化学形态活泼性顺序为CdPbCuZn,其中Cd主要为醋酸提取态,Pb主要为可还原态,各占总量的40%以上,具有较高的生物有效性和潜在危害性;Cu与Zn主要为残渣态,占总量的60%左右,生物可利用性较低。由因子分析法可知,土壤p H值越大,Zn与Cd就越趋于向稳定的化学形态转化,土壤有机质含量越高,对Cu与Pb的络合能力就越强,可以降低其环境危害性。     

Chemical and spectroscopic characterization of organic matter during the anaerobic digestion and successive composting of pig slurry

In this work, anaerobic digestion of pig slurry and successive composting of the digestate after centrifugation were studied by means of chemical analysis, FTIR and fluorescence spectroscopy as excitation–emission matrix (EEM). Chemical analysis highlighted the organic matter transformation occurring during the processes. A decrease of volatile solids and total organic carbon were observed in the digestate with respect to the fresh pig slurry as a consequence of the consumption of sugars, proteins, amino acids and fatty acids used by microorganisms as a C source. Water Extractable Organic Matter (WEOM) was obtained for all samples and fractionated into a hydrophilic and a hydrophobic fraction. The highest WEOM value was found in the pig slurry indicating a high content of labile organic C. The digestate centrifuged and the digestate composted showed lower hydrophilic and higher hydrophobic contents because of the decrease of labile C. Total phenolic content was lower in the digestate with respect to fresh pig slurry sample (36.7%) as a consequence of phenolic compounds degradation. The strong decrease of total reducing sugars in the digestate (76.6%) as compared to pig slurry confirmed that anaerobic process proceed mainly through consumption of sugars which represent a readily available energy source for microbial activity. FTIR spectra of pig slurry showed bands indicative of proteins and carbohydrates. A drop of aliphatic structures and a decrease of polysaccharides was observed after the anaerobic process along with the increase of the peak in the aromatic region. The composted substrate showed an increase of aromatic and a relative decrease of polysaccharides. EEM spectra provided tryptophan:fulvic-like fluorescence ratios which increased from fresh substrate to digestate because of the OM decompostion. Composted substrate presented the lowest ratio due to the humification process.     

The effect of oxygen on chemical dechlorination of dieldrin using iron sulphides

The degradation of dieldrin by ferric sulphide (FeS₂) in aqueous solution was investigated when shielded against sunlight. An oxidative dechlorination process was observed under aerobic and anaerobic conditions; oxygen volume changed the degradation rate of dieldrin and the generation rate of reaction products. The dechlorination rate under microaerophilic conditions was fastest among the anaerobic to air oxygen concentrations. For this experiment, over 99% of the dieldrin was degraded, and 90% of the released chloride was detected after 30 d under 10 μmol oxygen. The major reaction products were different depending on the dose of oxygen. In the case of aerobic conditions, low molecular weight organic acids, such as formic acid, lactic acid, and oxalic acid, were generated as major reaction products. However, under anaerobic conditions, C₁₆H₂₂O₄ (dibutyl phthalate) and C₆H₁₃ClO (3-chloro-4-methyl-2-pentanol) were detected as reaction intermediates, and small amounts of succinic acid, malonic acid, and formic acid were also generated. These reactions proceed by FeS₂ interface reactions with H₂O under anaerobic condition, or O₂ under aerobic condition.     

Effects of a glyphosate-based herbicide on mate location in a wolf spider that inhabits agroecosystems

Chemical communication is important to many arthropod species but the potential exists for anthropogenic chemicals to disrupt information flow. Although glyphosate-based herbicides are not acutely toxic to arthropods, little is known regarding their effects on natural chemical communication pathways. The wolf spider, Pardosamilvina, is abundant in agroecosystems where herbicides are regularly applied and uses air- and substrate-borne chemical signals extensively during mating. The aim of this study was to examine effects of a commercial formulation of a glyphosate-based herbicide on the ability of males to find females. In the field, virgin females, when hidden inside pitfall traps with herbicide, attracted fewer males than females with water. Likewise females in traps with a ring of herbicide surrounding the opening were less likely to attract males than those in traps surrounded by water. We explored the reaction of males to any airborne component of the herbicide in a laboratory two-choice olfactometer experiment. When no female pheromones were present, males were equally likely to select herbicide or water treated corridors and they all moved through the apparatus at similar speeds. When female pheromones were present, the males that selected control corridors moved more slowly than those that selected herbicide and, if we control for the initial decision time, more males selected the control corridors over the herbicide. These data suggest that glyphosate-based herbicides are “info-disruptors” that alter the ability of males to detect and/or react fully to female signals.     

Redistribution of free tropospheric chemical species over West Africa: radicals (OH and HO₂), peroxide (H₂O₂) and acids (HNO₃ and H₂SO₄)

The purpose of this paper is to study the redistribution of chemical species (OH, HO₂, H₂O₂, HNO₃ and H₂SO₄) over West Africa, where the cloud cover is ubiquitously present, and where deep convection often develops. In this area, because of these cloud systems, chemical species are redistributed by the ascending and descending flow, or leached if they are soluble. So, we carry out a mesoscale study using the Regional Atmospheric Modelling System (RAMS) coupled to a code of gas and aqueous chemistry (RAMS_Chemistry). It takes into account all processes under mesh. We examine several cases following the period (November and July), with inputs emissions (anthropogenic, biogenic and biomass burning). The radicals OH and HO₂ are an indicator of possibilities for chemical activity. They characterize the oxidizing power of the atmosphere and are very strong oxidants. The acids HNO₃ and H₂SO₄ are interesting in their transformation into nitrates and sulfates in precipitation. In November, when photochemistry is active during an event of biomass burning, concentrations of chemical species are higher than those of November in the absence of biomass burning. The concentrations of nitric acid double and sulfuric acid increases 70 times. In addition, the concentrations are even lower in July if there is a deep convection. Compared to measures of the African Monsoon Multidisciplinary Analysis (AMMA), the results and observations of radicals OH and HO₂ are the same order of magnitude. Emissions from biomass burning increase the concentrations of acid and peroxide, and a deep convection cloud allows the solubility and the washing out of species, reducing their concentration. Rainfalls play a major role in solubility and washing out acids, peroxides and radicals in this region.     

Rapid genetic erosion in pollutant-exposed experimental chironomid populations

Few studies have evaluated how effectively environmental contamination may reduce genetic diversity of a population. Here, we chose a laboratory approach in order to test if tributyltin (TBT) exposure at environmentally relevant concentrations leads to reduced genetic variation in the midge Chironomus riparius. Two TBT-exposed and two unexposed experimental populations were reared simultaneously in the laboratory for 12 generations. We recorded several life-history traits in each generation and monitored genetic variation over time using five variable microsatellite markers. TBT-exposed strains showed increased larval mortality (treatments: 43.8%; controls: 27.8%), slightly reduced reproductive output, and delayed larval development. Reduction of genetic variation was strongest and only significant in the TBT-exposed strains (treatments: −45.9%, controls: −24.4% of initial heterozygosity) after 12 generations. Our findings document that chemical pollution may lead to a rapid decrease in genetic diversity, which has important implications for conservation strategies and ecological management in polluted environments.     

Batch sorption dynamics and equilibrium for the removal of lead ions from aqueous phase using activated carbon developed from coffee residue activated with zinc chloride

Lignocellulosic materials are good precursors for the production of activated carbon. In this work, coffee residue has been used as raw material in the preparation of powder activated carbon by the method of chemical activation with zinc chloride for the sorption of Pb(II) from dilute aqueous solutions.The influence of impregnation ratio (ZnCl₂/coffee residue) on the physical and chemical properties of the prepared carbons was studied in order to optimize this parameter. The optimum experimental condition for preparing predominantly microporous activated carbons with high pore surface area (890 m²/g) and micropore volume (0.772 cm³/g) is an impregnation ratio of 100%. The developed activated carbon shows substantial capability to sorb lead(II) ions from aqueous solutions and for relative impregnation ratios of 75 and 100%, the maximum uptake is practically the same. Thus, 75% represents the optimal impregnation ratio.Batch experiments were conducted to study the effects of the main parameters such as contact time, initial concentration of Pb(II), solution pH, ionic strength and temperature. The maximum uptake of lead(II) at 25 °C was about 63 mg/g of adsorbent at pH 5.8, initial Pb(II) concentration of 10 mg/L, agitation speed of 200 rpm and ionic strength of 0.005 M. The kinetic data were fitted to the models of pseudo-first order and pseudo-second order, and follow closely the pseudo-second order model. Equilibrium sorption isotherms of Pb(II) were analyzed by the Langmuir, Freundlich and Temkin isotherm models. The Freundlich model gives a better fit than the others.Results from this study suggest that activated carbon produced from coffee residue is an effective adsorbent for the removal of lead from aqueous solutions and that ZnCl₂ is a suitable activating agent for the preparation of high-porosity carbons.     

Fluoride removal by a continuous flow electrocoagulation reactor

Long-term consumption of water containing excessive fluoride can lead to fluorosis of the teeth and bones. Electrocoagulation (EC) is an electrochemical technique, in which a variety of unwanted dissolved particles and suspended matter can be effectively removed from an aqueous solution by electrolysis. Continuous flow experiments with monopolar aluminium electrodes for fluoride removal were undertaken to investigate the effects of the different parameters such as: current density (12.5-50A/m(2)), flow rate (150-400 mL/min), initial pH (4-8), and initial fluoride concentration (5-25mg/L). The highest treatment efficiency was obtained for the largest current and the removal efficiency was found to be dependent on the current density, the flow rate and the initial fluoride concentration when the final pH ranged between 6 and 8. The composition of the sludge produced was analysed using the X-ray diffraction (XRD) spectrum. The strong presence of the aluminium hydroxide [Al(OH)(3)] in the above pH range, which maximizes the formation of aluminium fluoride hydroxide complex [Al(n)F(m)(OH)(3n-m)], is the main reason for defluoridation by electrocoagulation. The results obtained showed that the continuous flow electrocoagulation technology is an effective process for defluoridation of potable water supplies and could also be utilized for the defluoridation of industrial wastewater.     

Study on the hydrolysis/precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al³⁺, Al₁₃ and Al₃₀ under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl₃, PAC_Al13 and PAC_Al30 were 6.5–7.5, 8.5–9.5, and 7.5–9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl₃ ? PAC_Al30 > PAC_Al13. The precipitates' size increased when the dosage increased from 50 μM to 200 μM, but it decreased when the dosage increased to 800 μM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The iso-electric points of the freshly formed precipitates for AlCl₃, PAC_Al13 and PAC_Al30 were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl₃ hydrolysis precipitates were lower than those of PAC_Al13 and PAC_Al30 when pH > 5.0. The Zeta potential of PAC_Al30 hydrolysis precipitates was higher than that of PAC_Al13 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al–Ferron research indicated that the hydrolysis precipitates of AlCl₃ were composed of amorphous Al(OH)₃ precipitates, but those of PAC_Al13 and PAC_Al30 were composed of aggregates of Al₁₃ and Al₃₀, respectively. Al³⁺ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al₁₃ and Al₃₀ species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al–Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al–Ferron method. The chemical composition of Al_a, Al_b and Al_c depended on coagulant and solution pH. The Al_b measured in the current case was different from Keggin Al₁₃, and the high Al_b content in the AlCl₃ hydrolysis precipitates could not used as testimony that most of the Al³⁺ was converted to highly charged Al₁₃ species during AlCl₃ coagulation.