胰岛素废水处理工程设计

针对某医药公司在制取胰岛素过程中产生的高浓度废水，采用预处理（酒精回收-盐水投配-除油）-倒A2O-接触氧化-化学除磷组合工艺进行调试，其处理效果明显，出水各项指标均能达标，同时对工艺中存在的缺陷进行了分析。     

Treatability studies of naphthalene in soil,water and air with persulfate activated by iron(Ⅱ)

Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO₄], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO₄] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.     

水杨酸甲酯废渣的初步分析

通过红外光谱和核磁共振方法分析生产水杨酸甲酯时所产生的废渣的主要在分，得出主要成分是４－羟基－１，３－苯二甲酸二甲酯的讨论。该化合物在药物合成上一定的用途。     

染料废水的治理现状及展望

介绍了染料废水的处理现状,目前国内外主要的处理方法有物化法(常用的有吸附法、混凝法、膜技术等)、化学法(如氧化法、电解法等)和生化法(投菌法微生物降解,好氧/厌氧工艺),介绍了各种工艺方法处理染料废水的实例并指出了各方法的优缺点和技术的关键,最后对今后染料废水处理技术的发展进行了展望。     

HBCOD-1型COD在线自动监测仪的应用

介绍了HBCOD-1型COD在线自动监测仪的测定原理、分析流程和性能特点。仪器采用重铬酸钾氧化水中有机物和还原性无机物，通过分光光度法测定水中化学耗氧量（COD值）。与国标方法进行线性回归校正后，仪器测定值与国标方法测得的CODCr，值具有较好的一致性。     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm(PM_2.5) fraction in road dust(RD_2.5) of oasis cities on the edge of Tarim Basin,30 road dust(RD) samples were collected in Kashi,Cele,and Yutian in the spring,2018,and RD_2.5 was collected using the resuspension approach.Eight watersoluble ions,39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed.Ca     

Concentrations and chemical compositions of PM10 during hazy and non-hazy days in Beijing

In order to study the concentrations of major components,characteristics and comparison in hazy and non-hazy days of PM₁₀ in Beijing,aerosol samples were collected at urban site in Beijing from December 29,2014 to January 22,2015.Heavy metals like Zn,Pb,Mn,Cu,As,V,Cr and Cd were deeply studied considering their toxic effects on human being;nine water-soluble inorganic ions(SO₄^2-,NO₃^-,NH₄⁺,Na⁺,K⁺,Cl...     

宁东基地大气PAHs污染特征及呼吸暴露风险

利用主动观测技术对宁东能源化工基地大气PM_2.5、PM_1.0和气相中的PAHs浓度水平、族谱特征、时空分布及来源进行研究,并基于该观测数据对居民呼吸暴露健康风险进行评估.结果表明,宁东基地大气PM_2.5、PM_1.0及气相中∑₁₆PAHs浓度范围分别为：17.95~325.12ng/m³、12.66~311.96ng/m³和26.33~97.88ng/m³,年均浓度分别为（99.42±117.48）ng/m³、（78.88±100.58）ng/m³和（57.89±47.39）ng/m³.宝丰基地冬夏季大气PM_2.5、PM_1.0和气相中∑₁₆PAHs浓度水平均明显高于英力特;宝丰和英力特基地冬季大气PM_2.5、PM_1.0中∑₁₆PAHs浓度水平均明显高于夏季浓度.宁东基地大气中∑₁₆PAHs的浓度水平要高于国内外其他城市,大气PAHs污染较为严重.源解析表明夏季宁东基地PAHs的主要排放源是工业煤燃烧和机动车尾气,冬季则主要来自工业煤燃烧和木材、薪柴等生物质燃烧排放.宁东基地人群暴露于大气PAHs可能会造成平均冬季每百万人中约有33~2628人罹患癌症,夏季每百万人中约有11~834人罹患癌症的风险.     

南京市农用地土壤中重金属形态特征分析

以南京市农用地土壤为研究对象,采用顺序提取的方法对Cu、Zn、Pb、Cd做化学形态分析,了解不同元素各形态下空间赋存的含量与占比。结果表明,在农用地土壤中,上述4种金属元素所赋存的化学形态活泼性顺序为CdPbCuZn,其中Cd主要为醋酸提取态,Pb主要为可还原态,各占总量的40%以上,具有较高的生物有效性和潜在危害性;Cu与Zn主要为残渣态,占总量的60%左右,生物可利用性较低。由因子分析法可知,土壤p H值越大,Zn与Cd就越趋于向稳定的化学形态转化,土壤有机质含量越高,对Cu与Pb的络合能力就越强,可以降低其环境危害性。     

Shipyard fatalities in Turkey

The objective of this paper is to investigate causes and incidence rates of 115 fatalities between 2000 and 2010 in Turkish shipyards and to propose mitigation measures. The fatality rate in Turkish shipbuilding industry is unacceptably high, being 3.5 times the average of all industry groups. Classification of fatal occupational accidents revealed five major fatality reasons for the shipbuilding industry; falling from higher elevation to a lower level, exposed to electric shock, fire and/or explosion, being struck by or struck against objects, and caught in between. The highest number of cases of fatal accidents was found among welders, blasters, painters and substructure workers. Statistically analyzed data showed that working on Mondays and Saturdays have special impact on the fatality probability. Also, the number of fatalities is highest in working temperatures above average 25 °C, which covers from June through September. Strategies recommended to minimize the fatalities at shipyards are discussed. Furthermore a risk framework of fatal occupational accidents were drawn so that when working conditions are within the high risk region, extra precautions can be taken in order to minimize the occurrence of accidents and fatalities.