Kinetics characteristics of coal low-temperature oxidation in oxygen-depleted air

The longwall gob (mined-out) area is one of the main places that are prone to coal spontaneous combustion and most of the residual coal in it is in oxygen-depleted air as it is a semi-enclosed space. A DSC (Differential scanning calorimetry) test system was designed to accurately test the heat generation of coal oxidation in different oxygen concentration atmosphere, based on which the kinetics parameters (activation energy and pre-exponential factor) of coal low-temperature oxidation in oxygen-depleted air were solved out. The results show that the kinetics parameters present obvious stage features and the lower the oxygen concentration is, the smaller is the difference of the kinetics parameters that in different oxidation stages. When the oxygen concentration is lower than 5% and 3% for jet coal and meagre coal respectively, the kinetics parameters of slow oxidation start to be greater than that of rapid oxidation. Both in the slow oxidation and rapid oxidation stage, with the decrease of oxygen concentration, kinetics parameters present significant decline on the whole while in different oxygen concentration range, the decline rate is different. It's concluded that when assessing the residual coal's self-heating risk, we need to use the corresponding kinetics parameters of coal oxidation in the oxygen concentration of the location where the residual coal is and the safety factor will be greater to only use the kinetics parameters of coal oxidation in slow oxidation stage. This study is of great significance for the assessment and control of the self-heating risk of coal that in different oxygen concentration atmospheres of the longwall gob areas.     

Serious BTEX pollution in rural area of the North China Plain during winter season

Atmospheric BTEX compounds(benzene, toluene, ethylbenzene and xylenes) in a rural site of the North China Plain(NCP) were preliminarily investigated in winter, and the outdoor concentrations(25.8–236.0 μg/m3) were found to be much higher than those reported in urban regions. The pollution of BTEX inside a farmer's house was even more serious, with combined concentrations of 254.5–1552.9 μg/m3. Based on the ratio of benzene to toluene(1.17 ± 0.34) measured, the serious BTEX pollution in the rural site was mainly ascribed to domestic coal combustion for heating during the winter season. With the enhancement of farmers' incomes in recent years, coal consumption by farmers in the NCP is rapidly increasing to keep their houses warm, and hence the serious air pollution in rural areas of the NCP during winter, including BTEX, should be paid great attention.     

Study on acceleration and suppression properties of coal gangue with different void fractions on gas explosion propagation

Gas explosion is one of the main disasters in coal mining. Plenty of coal gangue are generally distributed in the disaster areas in gob. Experiments were carried out to explore the propagation law of the gas explosion distributed by coal gangue. The variation characteristics of the overpressure, pressure rise rate, and flame shape with void fractions were analyzed. The results showed that the effect of the coal gangue on the explosion intensity changed from suppression to acceleration with the increase of void fraction, the flame front upstream blockage area changed from laminar state to turbulent divergent state, and a reverse flame was formed. When the void fraction of the coal gangue was 0.50–0.65, the maximum overpressure downstream of the blocked area were positively correlated with the void fraction and the critical suppression range was between 0.50 and 0.55. When the void fraction was lower than 0.50, the flame was quenched in the coal gangue, neither the flame nor the pressure could pass through the blocked area. It is helpful to guide the improvement of coal recovery process to avoid the expansion of the explosion impact in coalmine gob.     

城市煤气输配过程中的变频调速自动恒压控制系统

将河南平顶山煤气公司原煤气输配系统改造成为自动恒压控制系统,从而提高安全系数,降低煤气输配电耗。     

我国地方煤矿的事故分析及预防对策

概述了我国煤矿事故的现状，对近几年我国地方煤矿的伤亡事故进行了统计分析，探讨了事故发生的原因，提出了预防对策     

The characteristic of in situ stress in outburst area of China

In order to obtain the characteristics of in situ stress field in outburst mining area, using the hollow inclusion (HI) technique to measure the in situ stress of coal and gas outburst mining area. The measurement sites located in northeast, middle and east of china, which include eight mining areas such as Fuxin, Pingdingshan, Hebi and Huainan. Base on the analysis of measurement data from outburst mining area, conclusions could be obtained as follow: (a) major principal stress and minor principal stress is horizontal stress and interim principal stress is vertical stress, and the type of outburst area’s stress field is dynamic stress field; (b) the major principal stress and minor principal stress are higher than other regions and the tectonic stress is outstanding; and (c) the ratio of major principal and vertical stress is decrease with the increase of depth and the type of stress field is likely transfer dynamic to static. Thus, in situ stress plays a key role during the occurring and development of coal and gas outburst, which is an important reason of severe outburst in China.     

Influence of super-absorbent polymer on the growth rate of gas hydrate

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H₂O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10⁻⁶/m³ min⁻¹, 0.53 × 10⁻⁶/m³ min⁻¹ and 1.42 × 10⁻⁶/m³ min⁻¹, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.     

Experimental study on the influence mechanism of gas seepage on coal and gas outburst disaster

By using the self-developed triaxial servo-controlled seepage equipment for thermo-fluid-solid coupling of coal containing gas and the self-developed coal and gas outburst simulation test device, experiments to study the influence mechanism of gas seepage on coal and gas outburst disasters. The results show that: (i) gas seepage decreases the strength of coal containing gas and accelerates its failure process; (ii) under the same gas pressure, the confining pressure is larger, the more difficult the gas flows and the greater the intensity of coal containing gas is; (iii) in the process of coal and gas outburst, the greater the vertical ground stress is, the more powerful the outburst will be; (iv) the influence mechanism of gas seepage on coal and gas outburst disasters is as follows: firstly, gas seepage weakens the mechanical properties of coal body, which makes it much easier for coal and gas outburst to occur; secondly, on the same effect of external force, it will be easy to form a high gas pressure zone in the coal body under the difficult condition of gas seepage, and accumulate more gas compression energy, which is the energy source for coal and gas outburst, and it is also the main dynamic source to throw and grind the coal.     

Experimental research into effects of obstacle on methane-coal dust hybrid explosion

An experimental system including pressure transducer, data acquisition card, computer and electric spark ignition device was set up to research methane-coal dust hybrid explosions in closed tubes with different types of obstacles inside. Its dynamic response time was less than a millisecond and the test precision was 0.1%. The experimental results show that the obstacles had great effects on the explosion characteristics in the tube. Hollow obstacles linked with inner wall of the tube induced faster pressure rising than installed center blocked solid obstacles. Obstacles with more sharp corner induce more violent explosions. The most dangerous explosion occurred when spacing between obstacles almost equaled the inner diameter of the tube for the same size obstacle.     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.