湖北省应急物资保障体系探析

为深入贯彻落实习近平总书记关于健全统一的应急物资保障体系,把应急物资保障作为国家应急管理体系建设重要内容的重要讲话精神,总结分析湖北省应急物资保障体系现状,针对湖北省自然灾害和事故灾难救援救灾任务的情况,分析目前湖北省应急物资保障体系存在的问题及对策措施,为"十四五"提升应急物资保障能力提供参考.     

基于不同强度等级混凝土的动力学特性研究

基于TAW-2000D电液伺服岩石三轴仪和直径75 mm的霍普金森压杆试验装置,得到了C25,C35和C45混凝土在静、动载荷作用下的应力-应变曲线,探讨了混凝土强度等级、动态峰值强度、峰值应变和应变率之间的变化规律。结果表明:混凝土准静态应力-应变曲线和动态应力-应变曲线在形态上存在明显差异,动态应力-应变曲线的峰值点随应变率的增大向右上方移动,线弹性阶段各曲线斜率变化不明显;动态峰值应力、动态弹性模量和峰值应变均存在不同程度的率相关性,并且混凝土材料的应变率敏感性随其强度等级的提高而增强;混凝土C45的各力学指标对应变率的敏感性最强,C35次之,C25的应变率敏感性最弱;推导了应变率与强度等级和冲击速率之间的经验公式,三者之间存在非线性变化规律。     

城市废物的回收处理与利用

当前世界各国均面临着“废弃物”所造成的环境污染问题。本文列举了一些国家“废弃物”的排放以及回收利用情况,并举例说明对变废为宝的技术路线和应该采取的措施。     

Proposing of new building scheme and composite towards global warming mitigation for Malaysia

The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO₂ emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO₂ emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO₂ emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO₂ emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO₂ emissions compared to other schemes. Therefore, S8 has a decreased CO₂ effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing.     

上海市经济-环境系统的物质输入分析

对区域或城市经济-环境系统的物质输入分析。可以判断可持续发展所处的状态。进而为区域或城市制定循环经济发展战略提供依据。利用物质流的理论和方法．依据欧盟指导原则，分析了1990—2003年间上海市经济-环境系统的物质总需求和资源生产率等主要指标。研究结果表明：①上海市巨大的物质总需求和直接物质消耗给上海市的生态环境带来了巨大的压力；②1996年上海市的资源生产率是全国的1．22倍．但2000年日本的资源生产率是上海市的36倍；③影响上海市的物质总需求或者环境质量的关键因素是技术和制度能力。在上述的分析基础上。提出在2020年之前上海市发展循环经济要注重于输入端的减物质化和加强循环绍济的技术支撑研究与开发以及制度能力建设。     

Sustainability of silicon feedstock for a low-carbon society

We need to ensure the sustainable management of advanced materials, such as purified silicon, that contribute to a low-carbon society. Because a drastic increase in the demand for photovoltaic (PV) systems is tightening the supply of silicon for PV cells, the sustainability of silicon feedstock needs to be explored. For this purpose, a material flow analysis of silicon in Japan from 1996 to 2006 is presented in this paper. Our analysis finds that rapid growth in demand for polycrystalline silicon (pc-silicon) and single crystalline silicon (sc-silicon) has changed the structure of the purified silicon supply. The strong demand for purified silicon for solar cells is responsible for this change. While off-grade silicon obtained as a by-product of electronic-grade silicon (EG-Si) covered the demand for solar sells before 2000, pc-silicon is currently produced independently for solar cells via an energy-intensive process. Analysis of the resource effective-use index (REI), which indicates how effectively purified silicon is used, shows progress in the effective use of pc- and sc-silicon. REI analysis indicates that the effective use of pc-silicon is reaching a maximum, while the effective use of sc-silicon is advancing, with a corresponding increase in price. To ensure a sustainable supply of silicon feedstock, this paper proposes four solutions: (1) production of solar-grade pc-silicon by a less costly and less energy-consuming method; (2) reduction in the amount of crystalline silicon per watt in solar cells; (3) acceleration of the development and deployment of other solar cell types; and (4) reuse and recycling of solar cells in the future.     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

工业园区循环经济绩效评价方法研究

针对当前循环经济绩效内涵不明确,评价指标体系多局限于对循环经济发展水平等循环经济绩效评价中存在的问题,在系统归纳总结该领域研究现状基础上,明确了循环经济绩效的概念;进一步构建了基于生态效率-物质流分析的循环经济绩效评估指标体系,利用模糊数学和灰色聚类方法分别建立了循环经济绩效评估模型;最后,以上海化工园区和南通农药化学工业园为案例,对2个园区循环经济绩效进行评估。结果表明:从理论和方法上,构建的工业园区循环经济绩效评价指标体系是适用的;模糊综合评价和灰色聚类评价的结果存在一定的差异,模糊评价结果更为合理,而且该模型可以直观地表示出园区循环经济绩效的优劣势所在。进而,以上海化工园区作为标杆,针对南通农药化学工业园存在的资源效率偏低等问题,提出若干循环经济绩效改进措施。     

Resource Potentials and Limitations of A Nicaraguan Agricultural Region

Food production has to be increased in a sustainable way to meet the future global demand. A key position is attributed to developing countries. A deepened understanding of their agricultural regions with specific resource endowments and constraints is therefore crucial. In this study we propose a methodology based on material flux analysis (MFA) to assess the resource potentials and limitations of a Nicaraguan agricultural region. We focus on current regional and farm resource management and explore them under two scenarios. Indicators are nitrogen and the degrees of self-sufficiency (DSS) for energy, and the staples maize and beans. As data is scarce, most information is based on interviews with farmers of four categories and key persons, and on literature. The results show that nitrogen management does not differ considerably among categories. Nitrogen is mined mostly from staple plots. Self-sufficiency for beans is given in an average year. Yet, landless and small farmers neither produce enough maize for autoconsumption, nor are they self-sufficient for firewood. Energy supply is also the core problem of the region, since the DSS is 70%. Soil nitrogen stocks last at most for three more generations. Analyses with the scenario technique show that: (a) Unlimited population growth has serious consequences in the near future e.g. severe shortage of energy and food. (b) Alternative farming systems are possible, but they require reducing the population by a factor 2, and thus the creation of jobs in a Hinterland. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

炭素行业推行清洁生产的污染物排放系数研究

推行清洁生产、减少污染物排放量，根本的方法是控制物料流失。本研究对炭素制品生产过程中的投入产出进行物料平衡测算，确定各工序物料流失总量及污染物排放系数，提出减少流失、降低排污系数的措施。