城市污水处理厂控制系统现状及发展趋势

随着我国经济的发展和城市化进程的加快,城市规模不断扩大,城市的人口迅速增长,随之而来的是城市生活污水量不断增加。因此,未来我国应当加大对城市生活污水的处理力度,以改善不断恶化的水环境污染趋势。自动控制系统在城市污水处理系统中至关重要,目前已经逐步应用到污水处理工艺过程及出水水质监测过程当中,并且取得了很好的效果,这样不但节约了能源,而且有着广阔的发展前景。     

浅析地下水污染及其防治措施

地下水污染具有难逆转性和隐蔽性,与地表水污染相比,地下水污染防治具有更大的难度。所以,对地下水污染与防治做出研究具有重要意义,基于此,在对地下水污染原因分析的基础上,对地下水污染防治的措施进行了研究和探讨。     

环境监测实验室空气中汞污染与防治

采用冷原子吸收法,使用便携式测汞仪对实验室空气中汞的浓度进行测定,监测结果表明,环境监测实验室空气中汞的污染较为严重,主要来源于COD、氨氮、大气中氨及汞样品测定时含汞试剂及汞标液的使用和含汞废液的排放。根据对监测结果的评价和分析提出了相应的防治措施,提醒实验室的管理及分析人员,要增强环境保护意识,加强实验室的管理,减少含汞及其它有毒废液的排放,改善实验室的环境空气质量,保护分析人员的身体健康。     

基于AHP-联系熵的应急预案实施过程风险评估

应急预案制定后的实施对于事故发生后预案的顺利运行至关重要,因此,有必要对应急预案实施过程的风险水平进行度量。以应急预案实施过程作为研究对象,基于风险理论与AHP-联系熵耦合方法开展风险评估。以应急预案实施过程风险水平为目标层,应急预案的宣传教育和培训、应急资源的定期检查落实、应急演习训练、应急预案的实用性检验、应急预案电子化、事故回顾等过程要素作为策略层,实施方法科学高效、调动工作者积极的态度、领导的重视和能力、设备的完整性作为方案层,形成应急预案实施过程风险评估三级模型;运用联系熵表征风险标准与应急预案实施过程风险水平这2个集对之间的关联性,在AHP结构模型和权重分配的基础上计算加权熵并得到目标层的总联系熵,对比标准熵区间得到应急预案实施过程的整体风险等级。结果表明,采用AHP-联系熵度量方法提高了评价结果的结构性和准确性,比传统直接加权的方法更符合实际情况。     

环境风作用下弧形立面机场航站楼自然排烟效果的数值模拟研究

机场航站楼公共区域多采用自然排烟方式,而环境风和排烟窗控制模式会影响排烟效果,尤其在弧形立面航站楼中影响效果显著。以某弧形立面航站楼为研究对象,选取候机指廊弧形区域的自然排烟窗分3段控制启闭,进而确定6种控制模式,采用 FDS火灾动力学模拟软件研究了不同模式下的排烟效果,获得了环境风和发烟量对危险到达时间的影响规律, 提出了排烟窗控制模式流程。结果表明:对于弧形立面航站楼而言,排烟窗分段控制模式下的排烟效果优于不分段控制模式,可以有效降低环境风对自然排烟的影响。当环境风速超过10 m/s时,须关闭迎风向排烟窗,避免烟气倒灌。在法向环境风作用的不利条件下,当发烟量在0. 05~0. 20之间时,危险到达时间的最大值tmax与发烟量x满足一次函数关系式:tmax=-3018x+1030.5。     

环境监测中重金属污染的控制对策分析

在我国社会经济快速发展的过程中,人们对自然资源需求无度,造成生态环境破坏问题非常严重。通过环境监测可以及时分析空气中有毒有害的物质成分,并且对环境污染问题进行及时有效的解决。但是在监测的过程中所采用大量的空气试剂很容易造成环境二次污染等问题,为此必须要积极加强对环境监测中重金属污染的合理控制,对空气试剂产生的大量废弃物进行及时的回收处理,从而有效避免出现二次污染的情况,充分发挥环境监测的作用。     

高温炭化法处理工业废盐工程方案研究

针对工业废盐成分复杂、精制难度高的现状,本文提出了一种工业废盐的资源化工程方案,技术经济分析表明,该工程化方案在技术上、经济上能够实现满足投资、运营要求,具备较好的推广前景。     

环境检测机构人员培训工作探讨

环境检测人员培训在整个生态文明建设中发挥着至关重要的作用,本文从培训计划、培训内容、培训方式、有效评价和记录归档五个方面探讨了环境检测机构人员培训工作流程,以确保机构行之有效地开展人员培训。     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

Community-Based Environmental Management in Atlantic Canada: The Impacts and Spheres of Influence of the Atlantic Coastal Action Program

The Atlantic Coastal Action Program (ACAP) is a unique, community-based program initiated by Environment Canada in 1991 to help Atlantic Canadians restore and sustain watersheds and adjacent coastal areas. ACAP is the eastem-most Environment Canada Ecosystem Initiative. The ACAP family is currently made up of 14 ecosystem-based organizations in the four Atlantic provinces. Each one of these non-profit organizations operates independently, but is formally linked under the umbrella of ACAP to represent a force stronger than the individual parts. In Environment Canada's experience, the program consistently demonstrates the value of a community-based approach and produces results on an ecosystem basis. This paper will examine some of the impacts of ACAP in terms of economics, credible community science, and environmental results which most often align with Environment Canada's objectives. It will explore the influences of the community-based approach to environmental management on multiple scales (local, regional, etc.). Through examples, the paper will demonstrate the effectiveness of ACAP in influencing some of the policies, programs and attitudes of various levels of government and industry in the region, as well as describe how the community-based model has been exported internationally. The paper will conclude with a discussion on a planned path forward for ACAP.