Photocatalytic degradation of methyl orange using ZnO/TiO composites

ZnO/TiO₂ composites were synthesized by using the solvothermal method and ultrasonic precipitation followed by heat treatment in order to investigate their photocatalytic degradation of methyl orange (MO) in aqueous suspension under UV irradiation. The composition and surface structure of the catalyst were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and transmission electron microscopy (TEM). The degradation efficiencies of MO at various pH values were obtained. The highest degradation efficiencies were obtained before 30min and after 60min at pH 11.0 and pH 2.0, respectively. A sample analysis was conducted using liquid chromatography coupled with electrospray ionization ion-trap mass spectrometry. Six intermediates were found during the photocatalytic degradation process of quinonoid MO. The degradation pathway of quinonoid MO was also proposed.     

鼓风曝气充氧性能与曝气器水深关系

应用相似原理,建立曝气器清水充氧性能与曝气器浸没深度变化的数学模式,为曝气器充氧性能科学预测和曝气工艺设计提供可靠的参数。     

中央环保绩效考核对地方二氧化硫排放量的影响：基于“十一五”与“十二五”时期的检验

基于"十一五"和"十二五"期间(2006—2015)我国31个省份的面板数据,以二氧化硫排放量为研究对象,发现以环境约束性指标为抓手的环保绩效考核有效减少了地方的二氧化硫排放量,且"十二五"期间的政策驱动力比"十一五"期间更强。随着环保绩效考核的持续推进,年轻的省委书记越来越关注污染减排,但与年长的省委书记相比,环境绩效依然较差。总体来说,官员异质性对环境政策执行效果的影响正在逐渐减弱,制度化机制对地方环境治理的驱动效果正在增强。在"十四五"期间,进一步优化中央环保绩效考核制度将成为"打赢蓝天保卫战"的关键所在。     

二噁英/呋喃类的PGC柱-高效液相色谱精制法

针对现行二英物质的三氧化二铝柱分离净化技术的缺陷,介绍了目前最新的二英类物质间的单离纯化技术———高效PGC(PorousGraphiticCarbon)柱-液相色谱分离方法的实际应用。通过13C-二英类物质的实际分离条件以及分析流程的研究,二英类的最终纯化技术达到自动化。对实际土壤中二英类物质的分析结果表明:单分离二英类物质组分效果良好,回收率稳定达到99%以上,自动化程度高;溶剂用量少,安全性好;排除了人为干扰,减少了操作过程的失败。      

利用废旧橡胶研制管式微孔曝气器

采用废旧橡胶研制的微孔曝气器 ,制造工艺简单 ,机械强度高 ,价格低廉 ;传质效率高 ,曝气充氧性能优良 ,搅拌能力强 ;沿管长具有很好的均匀布气性 ,输气曝气合二为一 ,安装方便 ;拓展了废旧橡胶的综合利用途径 ,以废治废 ,减少了废旧橡胶对环境的污染 ,是固体废气物综合利用的环保型高科技产品。     

Relative Assessment of Indicators in Sustainability Enhancement (RAISE): a first approach in the manufacturing stage of products

The estimation of the sustainability performance of products requires tools to provide systematic approaches to the definition of impacts, indicators and comparative scenarios from early design stages. This paper illustrates the Relative Assessment of Indicators in Sustainability Enhancement (RAISE) methodology that is based on the measure of negative impacts generated during any product life cycle stage. This approach includes a systematic process for the definition and evaluation of indicators to compare the sustainability performance of products considering each indicator individually and using a holistic index of sustainability to entail an overall comparison between products from manufacturing scenarios. The RAISE method is developed with the aim of assessing sustainability performance of product life cycle stages and incorporating this assessment into the decision-making process when comparing different manufacturing scenarios. A guitar capo manufactured in polymeric material is used as case study to demonstrate the use of the method. In this paper, only the manufacturing stage is considered; however, the method can also be employed in other stages of the life cycle.     

碟形越浪式波能发电装置的三维数值模拟

基于计算流体力学软件的三维数值模拟技术,分析了碟形越浪式波能发电装置的越浪性能,通过构建基于水气两相VOF(Volume of Fluid)模型的三维数值波浪水槽对该装置进行三维数值模拟研究,数值计算结果与物理试验结果相互对比验证较为吻合,验证了所构建的三维数值波浪水槽的可靠性,通过考察装置的坡度、导流叶片个数、干舷高度对越浪性能的影响确定装置的最优结构参数。结果表明,在装置的斜坡面边缘增加回流板可减少波浪的反射,提高装置的越浪性能。在数值模拟中将装置的斜坡面边缘处安装回流板对碟形越浪式波能发电装置参数进行优化,通过分析回流板的长度对装置越浪性能的影响来探索最优回流板长度。     

Performance of the National Water Model in Iowa Using Independent Observations

This paper explores the performance of the analysis‐and‐assimilation configuration of the National Water Model (NWM) v1.0 in Iowa. The NWM assimilates streamflow observations from the United States Geological Survey (USGS), which increases the performance but also limits the available data for model evaluation. In this study, Iowa Flood Center Bridge Sensors (IFCBS) data provided an independent nonassimilated dataset for evaluation analyses. The authors compared NWM outputs for the period between May 2016 and April 2017, with two datasets: USGS streamflow and velocity observations; Stage and streamflow data from IFCBS. The distribution of Spearman rank correlation (r_s), Nash–Sutcliffe efficiency (E), and Kling–Gupta efficiency (KGE) provided quantification of model performance. We found the performance was linked with the spatial scale of the basins. Analysis at USGS gauges showed the strongest performance in large (>10,000 km²) basins (r_s = 0.9, E = 0.9, KGE = 0.8), with some decrease at small (<1,000 km²) basins (r_s = 0.6, E = ?0.25, KGE = ?0.2). Analysis with independent IFCBS observations was used to report performance at large basins (r_s = 0.6, KGE = 0.1) and small basins (r_s = 0.2, KGE = ?0.4). Data assimilation improves simulations at downstream basins. We found differences in the characterization of the model and observed data flow velocity distributions. The authors recommend checking the connection of USGS gauges and NHDPlus reaches for selected locations where performance is weak.     

新型气流剪切错流旋转填料床的综合性能评判

针对旋转填料床除尘效率低和运行能耗高的问题,通过改变上旋转填料环填料（上填料）和下旋转填料环填料（下填料）的孔隙率,增加填料环直径形成填料床壁面外突实现设备优化,研究超重力因子和气速对气流剪切错流旋转填料床（GSC-RPB）和新型气流剪切错流旋转填料床（NGSC-RPB）的影响,并提出应用品质因子评判填料床综合性能的方法。实验结果表明:优化前后旋转填料床的除尘效率和气相压力随着气速和超重力因子的增加而增加;NGSC-RPB的除尘效率较GSC-RPB有显著提高,NGSC-RPB的气相压降则略有降低;在达到国家超低排放浓度标准即5 mg/m3的前提下,通过对品质因子的分析可知,NGSC-RPB的综合性能有所提高,在气速为1.3 m/s,超重力因子为90~120时NGSC-RPB的综合性能最优。     

大跨度斜拉桥抗震性能分析与减震控制研究

本文以香溪河大桥为工程背景,利用大型有限元软件ANSYS建立该斜拉桥的有限元模型,进行地震作用下的动力非线性时程分析,并以COMBIN37单元模拟非线性粘滞阻尼器,研究了粘滞阻尼器参数对桥梁抗震性能的影响规律,并确定了合理的阻尼器参数取值。并对未设置与设置粘滞阻尼器的桥梁结构地震响应进行数值分析与比较,分析结果表明:合理设置粘滞阻尼器,可以有效降低桥梁结构关键部位在地震作用下的位移响应,并对结构内力也有一定的降低。本文研究结果为大跨度斜拉桥振动控制分析及工程应用具有重要的指导意义。