Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

Is The Ca + K + Mg/Al Ratio in the Soil Solution a Predictive Tool for Estimating Forest Damage?

The ratio between (Ca +K +Mg) and Al in nutrientsolution has been suggested as a predictive tool forestimating tree growth disturbance. However, the ratiois unspecific in the sense that it is based on severalelements which are all essential for plant growth;each of these may be growth-limiting. Furthermore,aluminium retards growth at higher concentrations. Itis therefore difficult to give causal and objectivebiological explanations for possible growthdisturbances. The importance of the proportion ofbase-cations to N, at a fixed base-cation/Al ratio, isevaluated with regard to growth of Picea abies.The uptake of elements was found to be selective;nutrients were taken up while most Al remained insolution. Biomass partitioning to the roots increasedafter aluminium addition with low proportions of basecations to nitrogen. We conclude that the low growthrates depend on nutrient limitation in thesetreatments. Low growth rates in the high proportionexperiments may be explained by high internal Alconcentrations. The results strongly suggest thatgrowth rate is not correlated with the ratio in therooting medium and question the validity of usingratios as predictive tools for estimating forestdamage. We suggest that growth limitation of Picea abies in the field may depend on lowproportions of base cations to nitrate. It istherefore important to know the nutritional status ofthe plant material in relation to the growth potentialand environmental limitation to be able to predict andestimate forest damage.     

Accounting for rate instability and spatial patterns in the boundary analysis of cancer mortality maps

Boundary analysis of cancer maps may highlight areas where causative exposures change through geographic space, the presence of local populations with distinct cancer incidences, or the impact of different cancer control methods. Too often, such analysis ignores the spatial pattern of incidence or mortality rates and overlooks the fact that rates computed from sparsely populated geographic entities can be very unreliable. This paper proposes a new methodology that accounts for the uncertainty and spatial correlation of rate data in the detection of significant edges between adjacent entities or polygons. Poisson kriging is first used to estimate the risk value and the associated standard error within each polygon, accounting for the population size and the risk semivariogram computed from raw rates. The boundary statistic is then defined as half the absolute difference between kriged risks. Its reference distribution, under the null hypothesis of no boundary, is derived through the generation of multiple realizations of the spatial distribution of cancer risk values. This paper presents three types of neutral models generated using methods of increasing complexity: the common random shuffle of estimated risk values, a spatial re-ordering of these risks, or p-field simulation that accounts for the population size within each polygon. The approach is illustrated using age-adjusted pancreatic cancer mortality rates for white females in 295 US counties of the Northeast (1970–1994). Simulation studies demonstrate that Poisson kriging yields more accurate estimates of the cancer risk and how its value changes between polygons (i.e., boundary statistic), relatively to the use of raw rates or local empirical Bayes smoother. When used in conjunction with spatial neutral models generated by p-field simulation, the boundary analysis based on Poisson kriging estimates minimizes the proportion of type I errors (i.e., edges wrongly declared significant) while the frequency of these errors is predicted well by the p-value of the statistical test.

温度及外加碳源对生物脱氮除磷过程的影响

针对污水处理厂普遍面临的进水碳源不足及冬季低温时出水氮磷不能稳定达标的问题,研究了温度(21、15和10℃)和外加碳源(乙酸)对活性污泥缺氧条件下反硝化及释磷过程的影响。结果表明,在缺氧条件下投加乙酸,释磷与反硝化反应可同时进行,且乙酸投量的增加仅延长快速碳源反硝化阶段及缺氧释磷阶段的反应时间;温度降低为15℃和10℃时,快速碳源反硝化阶段反硝化速率及缺氧释磷速率较21℃分别降低了约29.2%、42.2%和26.1%、32.3%。当硝态氮目标去除量与磷酸盐目标释放量之比超过5时,乙酸的最优投量以满足反硝化要求为准,计算得出21、15和10℃时常州某城镇污水处理厂乙酸最优投加量计算值约为30、39和46 mg/L。     

Inorganic nitrogen removal of toilet wastewater with an airlift external circulation membrane bioreactor

Removal of inorganic nitrogen (inorganic-N) from toilet wastewater, using a pilot-scale airlift external circulation membrane bioreactor (AEC-MBR) was studied. The results showed that the use of AEC-MBR with limited addition of alkaline reagents and volumetric loading rates of inorganic-N of 0.19-0.40 kg inorganic-N/(m3·d) helped achieve the desired nitrification and denitrification. Furthermore, the effects of pH and dissolved oxygen (DO) on inorganic-N removal were examined. Under the condition of MLSS at 1.56-2.35 g/L, BOD5/ammonia nitrogen (NH/-N) at 1.0, pH at 7.0-7.5, and DO at 1.0-2.0 mg/L, the removal efficiencies of NH4 -N and inorganic-N were 91.5% and 70.0%, respectively, in the AEC-MBR. The cost of addition of alkaline reagent was approximately 0.5-1.5 RMB yuan/m3, and the energy consumption was approximately 0.72 kWh/m3 at the flux of 8 L/(m2·h).     

渤海沉积物中重金属分布及环境背景值

讨论了渤海25柱岩芯样细颗粒（<0.063mm）中重金属含量分布,采用统计学方法确定了底质重金属的分布类型,通过渤海中部岩芯样分析结果,获得渤海沉积物中Cu、Pb、Zn、Cd的环境背景值。在研究中,借助Pb²¹⁰测年技术测定了百年前沉积层中重金属含量,结果与渤海底质Cu、Pb、Zn和Cd环境背景值是吻合的。     

杭州市区机动车污染物排放特征及分担率

选取杭州市区绕城高速、快速路、主干道和民用支路4种典型道路进行工况测试,建立了2010年机动车CO、HC、NOx和PM10排放清单,获得了分车型、燃料类型、排放标准以及道路类型的机动车污染物排放分担率.结果表明,杭州市机动车的污染物排放分担率差别显著,乘用车、出租车和公交车是CO和HC排放的主要来源,重型货车和公交车是NOx和PM10排放的主要来源,且乘用车的NOx排放分担率也较大;柴油车的NOx和PM10的排放分担率远大于其保有量的贡献率,是其排放的主要来源,汽油车是CO和HC排放的主要来源;占保有量30%的国0和国I车辆,对CO、HC、NOx和PM10排放分担率分别为67%、69%、58%和82%;主干道是机动车CO、HC和NOx排放的主要来源,其排放分担率分别为66%、65%和64%,民用支路是PM10排放的主要来源,分担率为55%.     

袋式除尘器喷管喷吹口径优化

喷管喷吹均匀是为了使同一排滤袋清灰力度均匀。针对袋式除尘器喷管喷吹气流均匀性的问题,国内外学者对各喷嘴出口气流质量流量的均匀性十分关注。采用流体力学fluent软件对喷管内流场进行模拟,提出了同一排滤袋清灰强弱分布受到各喷嘴出口气流的动量通量分布的影响,而不是质量流量的看法。对引射空间流场进行模拟,验证了这一看法。结果表明,为了达到喷管喷吹均匀,应使各喷嘴出口气流动量通量分布均匀。采用动量通量修正和重复迭代的方法对喷管喷吹口径进行优化设计,获得了较好的动量通量均匀性。     

Using a novel data linkage approach to investigate potential reductions in motor vehicle crash severity – An evaluation of strategic highway safety plan emphasis areas

Introduction: With the significant number of motor-vehicle fatalities occurring on the nation’s roadways in recent years, there exists a need to integrate a more complete range of data sources, available at a regional or statewide level, to effectively evaluate existing safety concerns and quantify their impacts. Crash data alone does not provide ample crash-associated citation, injury, and roadway characteristics; therefore, a more cohesive dataset is required to accurately and completely analyze the true impacts of motor-vehicle crashes. Previously developed strategies linked crash data with citation and roadway inventory data to enhance the identification and optimization of highway safety strategies. Method: The main objective of this research focused on developing a new deterministic linkage between crash and Emergency Medical Services (EMS) data, by utilizing the Massachusetts Crash Data System (CDS) and the Massachusetts Ambulance Trip Record Information System (MATRIS). Results: After several iterations of match criterion, the validated linkage successfully matched 58.3% of MATRIS records (containing an Injury Cause of Motor Vehicle Crash) to a CDS person record (55011 linked pairs, between 2014 and 2016). The data linkage provided significant insight into injury trends in several highway safety emphasis areas such as roadway departure, speeding-related, and distraction-affected crashes. The findings from this research are twofold: (1) an established process for linking previously separate data sets, and (2) a mechanism for analysis that provides decision-makers and safety professionals with a better measure of crash outcomes.